Latest grasper Tenders | Government grasper Tenders

CTN :45501580

18 Jun, 2026 NA

Pune - Maharashtra

Tender For enquiry for calling quotations for work of electrification work including removal of old wiring, relocation/rerouting of existing electrical wires, proper wire dressing and cable management, along with supply and installation of all necessary materials required for safe, organized, and professional execution of the work, at ehv project circle office ,rasta peth ,pune .

CTN :45175873

17 Jun, 2026 NA

Nadia - West Bengal

Tender For corrigendum : supply of hydrofiber with ionic silver dressing materials e e - sterile wound dressing , adhesive four layer foam , hydrofiber material dressings , hydrofiber material rope dressings , hydrofiber material

CTN :44041980

17 Jun, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of disposable roticulating laparoscopic grasper , disposable roticulating laparoscopic dissector , disposable roticulating laparoscopic scissors

CTN :45483913

30 Jun, 2026 NA

Patna - Bihar

Tender For supply of with 2 years warranty , grasping forceps for adult bronchoscope with 2 years warranty , biopsy forceps for pediatric bronchoscope with 2 years warranty , grasping forceps for pediatric bronchoscope with 2 years warranty , metallic trocar along with cannula slash sleeves with diameter 10 to 11 mm and working length of 110 mm and pyramid shaped pointed tip ,with 2 years warranty , metallic trocar along with cannula slash sleeves with diameter 10 to 11 mm and working length of 110 mm and blunt tip,with 2 years warranty , metallic trocar along with cannula slash sleeves 04 nos 02 non threaded and 02 threaded. diameter 5 to 6 mm and working length of 110 mm, with 2 years warranty , metallic hasson cone 10 mm with trocar and cannula 01 nos, with 2 years warranty , reducer sleeve with sealing cap 02 each in nos,with 2 years warranty , veress needle working lengths of 100 to 120 mm, with 2 years warranty , 5 mm atraumatic debakey grasping forceps with fenestration, double action jaws, 330 mm or more working length, plastic handle with unipolar connector and ratchet, with 2 years warranty , 5 mm atraumatic reddick olsen grasping forceps, double action jaws, 330 mm or more working length, plastic handle with unipolar connector, with 2 years warranty , 5 mm biopsy forceps, single action jaws, 330 mm or more working length, plastic handle with unipolar connector and ratchet, with 2 years warranty , 5 mm metzenbaum scissors, 330 mm or more working length, plastic handle without ratchet, with 2 years warranty , 5 mm hook scissors forceps, single action jaws, 330 mm or more working length, plastic handle without ratchet, with 2 years warranty , 5 mm claw forceps with 2x3 teeth, serrated single action jaws with ratchet handle, working length 330 mm, with 2 years warranty , 10 mm claw forceps with 2x3 teeth, serrated single action jaws with ratchet handle, working length 330 mm, with 2 years warranty , laparoscopic clip applicator medium to large compatible with lt 300 clips, 10 mm diameter, 330 mm or more length, with 2 years warranty , titanium ligation clips lt- 300box with 2 years warranty , knot tier for extracorporeal knotting with 2 years warranty , l-hook dissecting and coagulating electrode, l shaped, size 5 mm, length 33 cms or more, with 2 years warranty , spatula electrode, spatula- shaped, size 5 mm, length 33 cms or more, with 2 years warranty , fundus grasper with 2 cup serrated double action jaws with ratchet and ergonomic handle, with 2 years warranty , 5 mm suction irrigation tube set with 2 years warranty , monopolar hf cable with 2 years warranty , bipolar hf cable with 2 years warranty , 1st year camc after warranty for all above items , 2nd year camc after warranty for all above items , 3rd year camc after warranty for all above items , 4th year camc after warranty for all above items , 5th year camc after warranty for all above items , 6th year camc after warranty for all above items , 7th year camc after warranty for all above items , 8th year camc after warranty for all above items

CTN :45492723

30 Jun, 2026 53.82 Lacs

Pune - Maharashtra

Tender For supply of 0 point 8 mm probe for pneumatic lithoclast 605 mm length for ureteror , 2 part diamond tipped initial puncture needle 18 gauge 15 cm , absorbable haemostatic gelatin sponge 7 cm 5 cm 1 cm , aortic punch 3ponit 4 mm , double pigtail ureteric stent set black silicone 6 fr 26 cm , dressing wound care 10 cm 10 cm box of 5 , endopath claw extractor 5mm with unipolar cautery pin with ratchet , endopath curved merriland dissector 5mm with unipolar cautery , endopath curved scissors 5mm with unipolar cautery , endopath endoscopic bab cock grasper with ratchet , endopath hook scissors 5mm with unipolar cautery , endopath straight grasper 5mm with ratchet , laparoscopic specimen extraction large-200 ml , linear cutter reload unit blue cartidge for use with safety lock out 75mm , lithotomy pack ii contains under buttocks drape plastic reinforced , metallic double j ureteric stent with delivery system 06 fr 26 cm , slimming 200 reusable fiber 622 221 20 , slimming 365 reusable fiber 624 148 36 , slimming 550 reusable fiber 624 149 55 , stripper for 200um fibersholmium 5402 0164 , stripper for 365um fibers holmium 5402 0163 , stripper for 550um fibersholmium 5402 0151 , suprapubic balloon catheter set with needle trocar size 14 fr disposable fr disposable , ureteral access sheath 11 13 f 36 cm , ureteral access sheath 11 13 f 46 cm , ureteral access sheath 12 14 f 36 cm , ureteral access sheath 12 14 f 46 cm , ureteral access sheath 9 ponit 5 11 ponit 5 f 36 cm , ureteral access sheath 9 ponit 5 11ponit5 f 46 cm , ureteral dilator set from 4 fr thorough 16 fr , ureteric catheter 70 cm open end size 6 fr , ureteric catheter cone end graduated in 70 cmsize 5 fr , histidine tryptophan ketoglutarate solution 1 ltr pack , multiple clip applier for open surgery with 20 preloaded small size titanium clips with jaw angle of 30 degrees , retrieval forceps alligator 7 fr 40 cm rigid , sodium chloride solution 0ponit 9 percent non toxic plastic bottle of 3000ml , double j stent with positioner 26 cm 4 ponit 7 5 fr , double j stent with positioner 26 cm 6 fr //bid details 2 / 34

CTN :45507508

25 Jun, 2026 13.71 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of excavation, levelling and dressing of earth , fixing of all accessories and materials of single rail pole , erection of 11 kv isolator set , fabrication and commissioning of 11 kv isolator set , earthing of poles and transformer , construction of new transformer plinth , supply and fixing of stay wire and stay rod set , end termination of cable jointing , fabrication and erection of guarding wire , laying of xlpe power cable , supply and fixing of g.i. pipe , laying ,drawing sagging jumpering testing and commissioning of line , supply of ms channel , supply of 11 kv disc insulator , supply of 11 kv pin insulator , supply of 3 pole, 11 kv 400 amp isolator set , supply of structure for above set , supply of structure for pin and post insulator set , supply of pg clamps , supply of earthing rod , supply of end termination jionting , supply of 11 kv fuse set , supply of earth wire and gaurding wire , supply of gaurding channel , supply of f bracket for 33 kv , supply of 33kv v type cross arm , supply of 33 kv pin insulator , supply of 33kv disc fitting , supply of acsr dog conductor of 32 amp mcb , supply of danger board , supply of number plate , supply of barbed wire g.i. , supply of al. binding wire 6 swg , supply of stone pad , supply of belting angle

CTN :45499760

24 Jun, 2026 27.45 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in yelurivaripalem (v) of chimkaurthy mandal package (4 works) - shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders. , scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges.

CTN :45499765

24 Jun, 2026 22.82 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in ramachandrapuram (v) of chimkaurthy mandal package (3 works) -earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , filling in foundation with stone dust trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth ,plain cement concrete (1:4:8) prop using 40mm size hbg (ss5) metal including cost and conveyance of all materials and curing charges but including unskilled wages etc., complete for finished item of work for foundations and flooring bed (apss no. 402)(cssr) , rcc m- 20 nominal mix (cement:fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for footing ,rcc m- 20 nominal mix (cement:fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for columns.

CTN :45499769

24 Jun, 2026 17.57 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in pulikonda (v) of chimkaurthy mandal package 2 (3 works.) - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord, construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges., construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord, shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders., earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth

CTN :45499776

24 Jun, 2026 20.60 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in rangasaipuram village gadiparthivaripalem gp of chimakurthy (m) package 1 (4 works) - construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth . scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord . shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders.

Grasper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors