Latest grass cutter scrap Tenders | Government grass cutter scrap Tenders

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

Central Government/Public Sector

CTN :45174730

28 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no-98050035 u/s abandoned water tank, consisting of ms water storage tank, ms angle, ms sheet, gi pipe off size, bolt nut, rivets, rel. rail 52kg 90 r dh, mg/ng off sort & size, water tank plate, gi fitting, valves, ismb & ishb, ms round bar bracing and attachments if any etc. total qty.=69.976 mt approx. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/01 date 05.01.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting and dismantling allowed for easy loading. the material are lying in rajasthan state.

Central Government/Public Sector

CTN :45174732

28 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no-98050035 u/s abandoned water tank, consisting of ms water storage tank, ms angle, ms sheet, gi pipe off size, bolt nut, rivets, rel. rail 52kg 90 r dh, mg/ng off sort & size, water tank plate, gi fitting, valves, ismb & ishb, ms round bar bracing and attachments if any etc. total qty.=33.194 mt approx. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/02 date 07.01.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting and dismantling allowed for easy loading. the material are lying in rajasthan state.

Central Government / Public Sector

CTN :45307009

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m.s.assorted scrap -98050047(15) cond.&u/s m s assorted scrap consisting of draw hook beams, secondary minor pads, brake shoes, curved pull rod, swing link pins, upper primary centering disc,lower /upper centring disc,axle boxcover, anti roll bar traction lever secondary centering disc z link axle guides, draft keys, brake gear pins, ms dash pots, protective tubes, roller bearings ms, outer rings, moulds,eq.stays, support device r/f carrier plates, silent bush supporting device f/r plate, hanger blocks, bss pins, lower spring seats, brake heads, diff. types of brake hangers and levers, d v components, ms collars,long bolts, dm rings, retaining rings, c.b.c components, base plate,supporting device, c.p.b bracket with control reservoir,m 16 bolts and cotters ,split pins, wearing plates, m s pipes, safety strap, bracket for bogie bolster, centre pivots, brake beam support brackets, safety wire rope pieces, rod pieces, bmbc barrels, and connecting rods,m s cartridges, cr rings, brake, lhb bearing components, collars, bolt & nuts,control reservoir & common pipe bracket components,backlash compensation device with elastomer pads, anti roll bars, brake controllers,oil pumps & filters,ms avm pads, shoe keys etc., with or without attachments of rubber, fiber, nylon bushes and other similar carriage and memu items . hsn code: 72044900 gst@18% on forward charge basis. note:1) delivery on actual weighment basis only.2) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 3) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 4) railways does not guarantee for quality, quantity description etc. 5)if any ss/non-ferrous items found during loading /delivery shall be returned to the railways by the purchaser.6) segregation not permitted. location :ferrous yard bin no :- w-9.

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

Central Government / Public Sector

CTN :45289220

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m.s.assorted scrap -98050047(15) cond.&u/s m s assorted scrap consisting of draw hook beams, secondary minor pads, brake shoes, curved pull rod, swing link pins, upper primary centering disc,lower /upper centring disc,axle boxcover, anti roll bar traction lever secondary centering disc z link axle guides, draft keys, brake gear pins, ms dash pots, protective tubes, roller bearings ms, outer rings, moulds,eq.stays, support device r/f carrier plates, silent bush supporting device f/r plate, hanger blocks, bss pins, lower spring seats, brake heads, diff. types of brake hangers and levers, d v components, ms collars,long bolts, dm rings, retaining rings, c.b.c components, base plate,supporting device, c.p.b bracket with control reservoir,m 16 bolts and cotters ,split pins, wearing plates, m s pipes, safety strap, bracket for bogie bolster, centre pivots, brake beam support brackets, safety wire rope pieces, rod pieces, bmbc barrels, and connecting rods,m s cartridges, cr rings, brake, lhb bearing components, collars, bolt & nuts,control reservoir & common pipe bracket components,backlash compensation device with elastomer pads, anti roll bars, brake controllers,oil pumps & filters,ms avm pads, shoe keys etc., with or without attachments of rubber, fiber, nylon bushes and other similar carriage and memu items . hsn code: 72044900 gst@18% on forward charge basis. note:1) delivery on actual weighment basis only. 2)if any ss/non-ferrous items found during loading /delivery shall be returned to the railways by the purchaser.3) segregation not permitted. location :ferrous yard bin no :- w-15.

corporations/Associations/Others

CTN :45298450

30 May, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap fiber pice,polypropyline round block drg,m.s. 'u' bolt 16*280m,m.s. 'u' bolt 16*370m,m.s. round head rivet,m.s. round head solid rivet 6.25,pin revet for perment lock male,pin revet for perment lock female,grill bracket ms flat 50*06mm,allu alloy 5% silicon w.rod 1/8",m.s. bottem bush,stopper (m.s.),scrap plastic empty carba 35/50 ltr's,scrap wooden cases,scrap battery cut off switch,scrap alluminium wire,scrap weighing machine (300 kg capacity),flaxible round pvc pipe,scrap used empty m.s. drums 10/15/20 ltr's,scrap 3 hp induction motor with stand,scrap 3 hp induction motor with pump,scrap 5 hp induction motor with pulley,scrap monitor t.v. type

corporations/Associations/Others

CTN :45275468

26 May, 2026 NA

Sankagiri - Tamil Nadu

Tender For disposal of scrap - scrap sales for salem region, scraped old broken spring cut leaves, scraped old cast iron cylider liners, scraped old cast iron fly wheel face plate & brake drum ex. mani fold items, scraped old m.s angle ,pipes &bumpers & other ms items, scraped old g.i sheet & cut pieces, scraped old tarmixing with g.i sheet, scraped old body sheet frames & pipe items, scraped old body aluminum sheet & glass frames other cut pieces, scraped old auto m.s steels spares, bolt nuts &other auto parts items, scrap old gear wheel & shaft items, scraped old clutch plate, scraped old brake lining & clutch facing, scraped old bearings & cone items, scraped old wood, mica sheet,plywood items (11.924 mt), scraped old frb cowl & bumpers & all type of frb items ( 1.239 mt), scraped old hanger & shackle items, scraped old aluminium radiator core, scraped old brass rivit, scraped old 4 lt empty paint tin, scraped old 20 lt empty paint tin, scraped all type of filters air & oil filters, scraped old all type of plastic items, scraped old empty 210 lt oil barrel (gi sheet), scraped old empty grease barrel (gi sheet), scraped old empty plastc barrel, scraped old empty milk plastic pocket cover, scraped old aluminum stuffed sheet, scraped 12v 21p monoled battery, scraped 12v 25p monoled battery, scraped 12v 27p monoled battery, scraped lmv 12v 11p monoled battery, scraped old used 210 lt waste engine oil with barrel, scraped old front & rear brake shoe, scraped old steering box reservoir tank, scraped old all computer item computer: hcl pentium - iv dul core = 08 hp pentium -iv mbz = 12 ccs pentium -iv core 2 quad = 28 printers :tvs hd 245 gold dmp printer = 25tvs hd 945 dmp printer = 2tvs msp 455 xlc dmp printer = 08tvs hd 245 gold dmp printer = 16wipro hq 070 dx dmp printer = 02epson m200 inkjet printer = 03scanner :hp4850 color scanner = 01ups :0.5 kva ups = 02, 2kva ups = 14, 3 kva ups = 01, 5 kva ups = 03

Central Government/Public Sector

CTN :45289184

28 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms erc , liner, nut bolt etc all sort and size with or without undetachable ms. qty on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45275013

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - miscellaneous ferrous scrap consisting of ms pipe, ms platform gutter, gate lock, camera housing, tom cpu cage, gi clamp, nut & bolt, rack handle, earth switch handle, fencing, hydrant box, co2 fire extinguisher, cable tray, nrv, meter box, butter fly valve, pump handle, hand rail,i-clamp, c-levis end, board angle, exhaust bellow, brake shoe, locker, cross arms, super mast, bearing, hose drum, angle, false ceiling, almirah,pad lock, hacksaw frame, metal perforated chair,plu, ferrous parts of pids panel,smps parts, spare cells charger, ms drain cover,horn, isolator lever, opc suspension clamp, n/b of pg, driving screw assemble, rtu panel, fhc door, ball valve, coupling, nozzle, ups battery bank, table, wheel chair, bajaj hot case, autometic hand sanitiser dispenser, cable clamp, hnaging device, screw element, marker board, battery cabinet, osg rope, landing door header, brake unit, main rope 8mm, drawer, q manager, standee, hand & padel sanitiser dispenser, information board, rc, catenary & contact clamp, tirfof, n/b 76 pg, hose drum, 4 way valve,pressure switch, flexible gi condute, blade, anti roll bar, n2,o2, da & r-410 gas cylinder, tool box, angles etc. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 07"

Grass Cutter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors