Latest gravimetric feeder Tenders | Government gravimetric feeder Tenders

Central Government And Public Sector

CTN :39489492

28 Apr, 2025 19.46 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : tender for supply of signal condit module , scm009a15.bhel , signal interface module , bhel , sim029l08 , pulse input module pim2000 , make bhel , digital input module dim2001 , bhel , digital output module dom2000 , make bhel , analog output module , aom2000 , make bhel , bus terminator module btm2000 , make bhel , analog input module , aim2000 , bhel , pulse relay module prm 054d11 bhel , relay interface module rim034d11 , bhel , fdr disp keyboard , gfc-kbd or disp bh , bhel , 24 pole tacho generator , bhel , calibration probe , bhel , bhelfeed , retro refl tape , bhel , gravimetric feeder , calibration kit for grav.fdr , bhel , power supply module dnr60us12 , bhel , power supply module dnr120us12 , bhel , disch plug switch assy , 36 feeder , bhel , coal on belt switch assy , 36 feeder , bhel

corporations/Associations/Others

CTN :39489840

19 Apr, 2025 3.03 Lacs

Bokaro - Jharkhand

Tender For bid to ras corrigendum : tender for supply of graf seal formed gland packing spiral wound gaskets for hp valves of boiler - grafseal formed gland packing , od-56mm , id-28mm , t-14mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-b1 , grafseal formed gland packing , od-50mm , id-28mm , t-12mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-b85 , grafseal formed gland packing , od-55mm , id-35mm , t-10mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-e18 , grafseal formed gland packing , od-52mm , id-30mm , t-10mm , in two halves with oblique cut , to withstand 600 deg c temperature , pressure 250 bar , valve tag no-b84 , grafseal formed gland packing , od- 45 mm , id-30 mm , t-08mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no- b82 , grafseal formed gland packing , od-60 mm , id-38 mm , t-11mm , in two halves with oblique cut to withstand 600 deg c , pressure 250 bar , valve tag no-s73 , grafseal formed gland packing , od-58mm , id-35mm , t-12mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-e20 , grafseal formed gland packing , od-55mm , id-27mm , t-14mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , manual valve - 50 nb , globe valve , ho , grafseal formed gland packing , od-54mm , id-28mm , t-12mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-sb9 , grafseal formed gland packing , od-in two halves , od-54 mm , id-34 mm , t-10 mm , with oblique cut to withstand 600 deg c temerature , pressure 250 bar , valve tag no-s78 , grafseal formed gland packing , od-48 mm , id-30 mm , t-09 mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-s34 , grafseal formed gland packing , od-56mm , id-38mm , t-09mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-s35 , grafseal formed gland packing , od- 66mm , id-42mm , t-12mm , in two halves with oblique cut to withstand 600 deg c temperature , pressure 250 bar , valve tag no-sb6 , pure graphite packing in braided form reinforced with inconel wire suitable to withstand pressure of 450 bar and temperature 600 degree c. , pure graphite packing in braided form reinforced with inconel wire suitable to withstand pressure of 450 bar and temperature 600 degree c. , pure graphite packing in braided form reinforced with inconel wire suitable to withstand pressure of 450 bar and temp 600 c. , rubber bushing and stud of drive pulley of coal feeder , as per sample , material - en24 , bush - neoprene and brass , sub part of head pulley - belt drive pulley for 36inch gravimetric feeder , scanner cooling rubber hose pipe , wire impregnated , for burner , size-o.d 70mm , i.d 50mm , length 1500mm , approx. , , non asbestos thermal insulation webbing tape 3mm x 50mm , withstand temperature 500 degree c , , oil seal size -75x95x10 , make skf-vako , oil seal size -28x47x7 , make skf , vako , oil seal size -45x62x8 , make skf , vako , oil seal size -70x85x8 , make skf , vako , oil seal size -65x80x8 , make skf , vako , oil seal , size- 50 x 62 x 7 , make-jk- pioneer , sunny , oil seal size -60x90x8 , make skf , vako

CTN :40017066

21 Apr, 2025 8.88 Lacs

Nellore - Andhra Pradesh

Tender For certain annual maintenance works break-down works for gravimetric feeders raw coal bunker gates and feeder outlet gates as and when required during the year 2025 26 for unit-i gravimetric feeders

State Government

CTN :40028652

19 Apr, 2025 NA

Parli - Maharashtra

Tender For procurement of load cell for gravimetric feeders installed at i&c-2, 250 mw, tps, parli v.

CTN :40043091

30 Apr, 2025 1

Multi City - Andhra Pradesh

Tender For procurement of 36inch gravimetric feeder belts for units 3to 6

CTN :39571220

22 Apr, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of outletchutes for gravimetric feeders of unit-ii/sdstps

corporations/Associations/Others

CTN :39972847

19 Apr, 2025 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi vapi municipal corporation area. (annual rate 2025-2026) - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent ,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

corporations/Associations/Others

CTN :39929606

22 Apr, 2025 NA

Vyara - Gujarat

Tender For material supply work on public building construction of vyara nagar palika dist-tapi.2025-26 - brick, sand tapi river, aggregate 20 mm, machine cut metal 40 mm, hend cutter metal 40 to 63 mm, yellow soil, hard murrum, grit 10 mm, stone dust, broken brick, rubble, construction of granular sub-base 100 mm thick by providing coarse graded machine crushed b.t materials satisfying most specification of garde ii ( b.t stone aggregate 26.5 mm to 4.75 mm -75 percentage and 2.36 mm below -25 percentage ) including spreading in unifrom layer with motor grade on prepared surface , mixing by mix in place method with rotavtor at omc and compacting with vibratory roller to archive the desired density etc.complete..

corporations/Associations/Others

CTN :39930618

25 Apr, 2025 3.71 Lacs

Sonbhadra - Uttar Pradesh

Tender For overhauling, servicing, testing & commissioning of control/gate valve actuator, damper and gravimetric feeder of unit no. 13th , 2x200 mw, btps, obra activity no: 4.4.6