Latest grease cup Tenders | Government grease cup Tenders

Central Government/Public Sector

CTN :45103350

27 May, 2026 NA

Bhusawal - Maharashtra

Tender For supply of cable head termination system with vertical receptacle for 25 kv ac locomotive transformer having 120 sq.mm, 45kv xlpe copper cable item no. 01 to 13 and 15 to 21 in a set as per rdso sketch no. skel 4529 of specn. no. elrs/spec/bl/0003 rev-1. [ warranty period: 30 months after the date of delivery ]

CTN :45103188

02 Jun, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply of set of end shields for oil cooling blower motor 30kw of m/s cgl or similar make. set consisting of de side end shield-01 no.nde side end shield-01 no. with inner and outer grease cups of both side.[ warranty period: 30 months after the date of delivery ]

CTN :45117940

10 Jun, 2026 NA

Patiala - Punjab

Tender For supply of set of harnessed cables to clw spec. no. clw/es/03/0646, alt.-f with (i) plw requirement of harness cable for wap7 locomotive to annexure-a3 rev.-02 dated 18.03.2026 (ii) clw str no. clw/(2017)/eldo/(e)/str/01, rev-0 and installation/laying out of set of harnessed cable with other associated items (to be supplied by plw) as per sor plw/el/harnessed cables & cable tray/sor/004, dated:21.05.2024. notes: 1. following itemsto be supplied along with tendered item. (i) 3 pin cable connector female suitable to 2.5 sq mm cable mg 00f 16-10s b051 c30 003e of m/s allied electronics corporation or equivalent. (ii)3 pin rectapcle connector male suitable to 2.5 sq mm cable mg 06f 16-10p c30 of m/s allied electronics corporation or equivalent. 2. one set of tendered items to be sent to plw for sample approval after inspection by nominated agency before bulk supply. if any modifications/ changes are suggested by plw during sample approval, then firm shall have to carry out the modifications/changes as per plw requirement in the complete supplies. 3. evaluation of bids will be done purely on the basis of combined rate quoted for supply as well as installation/laying out of set of harnessed cables. 4.following addendum is incorporated to para 6.2 of sor plw/el/harnessed cables & cable tray/sor/004, dated:21.05.2024 "delay beyond ten working days from the allowed time for installation/laying out of harnessed cable shall be considered as failure of the supplier as per terms and conditions of the contract and plw would reserve the right to forfeit 20% balance payment against the material supplies for the corresponding qty. of harnessed cable sets". [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44998161

08 May, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : supply of earthing shunt tm to loco body of wag9hc locomotive with set of hex head bolts m10 & m12 with suitable nut, plain washer and spring washer as per drawing no. sk/dl/e/53/vta item ref 1 to 5. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government/Public Sector

CTN :45091984

04 Jun, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of boron free non chromate type corrosion inhibitor for engine cooling water of alco locomotive conferming to rdso letter no sd. tex.5 dated 09.01.2009 and as permp mi-15 (rev. 12) january-2019. make/brand- hp powerkool rr or equivalent approved by rdso. (only rdso approved sources to quote for this item) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45038396

18 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of secondary spring for wap 7 locomotive as per clw spec. no.clw/ms/3/spec-eldo-bogie/004, alt-1 or latest and clw drg.no.1209- 01.015-010 alt 1 or latest. item consisting of 08 nos of secondary spring one set. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45037376

26 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of two items for cylinder assembly of x-class locomotives as given below. item no(1) - valve spindle guide (rear steam chest cover) for rack cylinder assembly of x- class locomotive as per drawing no. goc/x/sk -11-09520 qty - 2nos/set item no (2) - valve spindle guide (rear steam chest cover) for adhesion cylinder assembly of x-class locomotive as per drawing no goc/x/sk-11-09510 qty - 2nos/set note: 1. item no (1) & (2) consists of one set.2. for equivalent material specifications refer goc/x/specx-032 3. for material specification, the firm has to submit nabl accredited lab test certificate alongwith the material supply [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45025719

18 May, 2026 NA

Nagpur - Maharashtra

Tender For set of modified end shield de & nde side with grease cup suitable for 6306 bearing of od 72 mm and width 19 mm with outlet for excess grease for m/s. samal harand make sctmb motor of 3-phase locomotives. one sample to be got approved before bulk supply. material to be procured from clw approved sources [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45014908

11 May, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of pneumatic pipe lines brass item of locomotive as per sketch no. elw/bsl/sk.no. 9075 alt-2. [one set consists of 06 items 33 nos. ]

Grease Cup Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors