Latest grease seal Tenders | Government grease seal Tenders

CTN :41288345

14 Aug, 2025 NA

Nasirabad - Rajasthan

Tender For supply of 133a032 , t connector with box, 343b701 , uhm pad for introduction , hex connector for filling gun, , l bend for filling gun, 359b537 , back mounting for cylinders , brass block,230b938 kosncris , 230b956 yoke plate c plates for gd pt , ms block,230b955 , 230b896, centering base plate , 231b648, centering clamping plates , centering arm roller, 215b931 , manchete, 110651 , slide for cylinders, , clamping arm, , m10 stud rod , toggle joint , vibration damper, 153210 , complete centering assembly gd pt , mark iv cuc card 134362 , communication cable with lan end , cuc card cable for mk 4 , loadcell cable for double static checkscale , display, kosan mark iv cuc , key pad for cuc , load cell cable mark 4 , magnetic sensor,161a182,turck , clamp for magnetic sensor , inductive sensor , sensor cable 3 mtr , sensor cable 5 mtrs , sick optic sensor , sick reflective sensor , sick diffusive sensor , optical cable , lens for fiberoptic 2017400 , lot adopter , bearing skf 6024 2z , bearing skf 6016 2z , bearing skf 6304 2z , bearing skf 6305 2z , anchor bolt 10 mm , anchor bolt 12mm , anchor bolt 16 mm , ms nut and bolt m8 2.5inch , ms nut and bolt m10 1.5inch , ms nut and bolt m12 3.5 inch , ms nut and bolt m16 4 inch , allenkey bolt 4mm head , allenkey bolt 3mm head , screw for cuc card kosan , flat head allen key bolt 4mm head , glass section for pipeline 2 inch , gskt,sht,asbestos,4mm , gasket,sponge rubber , conveyor chain, riveted , pneumatic push button , pneumatic cylinder with teflon pad , pnuematic gun for service air , metal gasket for pipeline 0.5 inch , metal gasket for pipeline 1 inch , metal gasket for pipeline 2 inch , metal gasket for pipeline 3 inch , metal gasket for pipeline 4 inch , metal gasket for pipeline 6 inch , metal gasket for pipeline 8 inch , metal gasket for pipeline 10 inch , cir receiver mounted,110671 carousel , 48 head gun , cuc card display , g.d. cup lower bell , sealing machine cup , manual sealing machine cup , 131507 pd 948 pressure transmitter , pam 5kg gun set , toggle joint g.d. and p.t , boom dry chain , filling vot gun , filling lot gun , cylinder c96kdb40 300c smc , front plate keyboard cuc mkiv , guide road set , 48h module , 48h clutch , lifiting pad with bearing and bolt , gd_ pt clamping arms with rollers , lifter bearing skf 6301 2rs1 , bush bolt gd_pt , stopper roller double wheel , gas stop valve seal kit 48 head , makeen cuc load cell module mkiv 1 load cell ad box

CTN :41288302

22 Aug, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of raph spares d d - mc- st010360001 radial seals -excluding t bar- - corten steel- , mc- st010360002 static seal assembly-hot end , mc- st010360005 by pass seals - corten steel- , mc- st010360006 axial seal -corten steel- , mc- st010360045 static seal assembly- axial , mc- st010360046 t-bar , mc- st010360013 rotor gratings , mc- st010470345 raph soot blower assembly , mc- st010350014 swivel ball joint , mc- st010470344 seal ring retainer with spring set , mc- st010470343 aluminium channel for radial seal setting , mc- st010470346 aluminium channel for axial seal setting

Central Government/Public Sector

CTN :41309735

18 Aug, 2025 NA

Solapur - Maharashtra

Tender For supply of seal lip wear ring groove checking fixture, (consists of an inclined vertical st and with v block,a dial gauge and master guage). a) dial gauge range - 0 to 10mm lc 0.001 m m, b) master gauge dia- 157.15 mm in assembled condition for inspection of depth on seal we ar ring at the contact position of grease seal as per rdso g -81 manual. [ warranty period: 3 0 months after the date of delivery ]

CTN :41225294

18 Aug, 2025 2.00 Lacs

Shimla - Himachal Pradesh

Tender For supply of nitrile rubber cord size 8 mm , nitrile rubber cord size 10 mm , nitrile rubber cord size 12 mm , nitrile rubber cord size 16 mm , static seal

CTN :41245812

28 Aug, 2025 NA

Multi City - Multi State

Tender For corrigendum : supply of low torque grease seal for aar standard upgraded class 'e'(6"x11") cartridge tapere d roller bearings (ctrbs) used in freight stock to rdso specification no. wd-63-misc-2020 of octobe r 2020 with latest amendments, if any. [ warranty period: 48 months after the date of delivery ]

Central Government/Public Sector

CTN :41183981

13 Aug, 2025 NA

Jaduguda - Jharkhand

Tender For supply of grease seal for wheel axle as per drg no-d11/em 812r , rubber ring for suspension drg. no-d11/em 400 , g. c wheel as per drg no-d11/em 405/a/r1

CTN :41166594

29 Jul, 2025 3.31 Crore

Patna - Bihar

Tender For rrsmp/25-26 gaya/04 - construction of road from kariyadpur to indrapur under mmgsuy head in tankuppa block, clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401.for grading ii material, wbm grading 3 :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., mix seal surface :- providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509, semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., panel concrete pavement (pqc) :- construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per app

CTN :41166595

29 Jul, 2025 12.69 Crore

Patna - Bihar

Tender For rrsmp/25-26 gaya/02 - construction of road dumari chhati bridge to dundu village under mmgsuy head in fatehpur block, clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. for grading i material, wbm grading 3 :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., mix seal surface :- providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509, bituminous macadam :- providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggrega

CTN :41166603

29 Jul, 2025 8.83 Crore

Patna - Bihar

Tender For rrsmp/25-26 gaya/01 - construction of road domuhan road - tirkha under mmgsuy head in bodh gaya block, clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401.for grading ii material, wbm grading 3 :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., mix seal surface :- providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509, semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause

CTN :41166612

29 Jul, 2025 31.53 Crore

Patna - Bihar

Tender For rrsmp/25-26 barsoi/05 - bangali tola to pmgsy road, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, ro

Grease Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector