Latest grill mesh Tenders | Government grill mesh Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

State Government

CTN :45499622

25 Jun, 2026 NA

Mangalagiri - Andhra Pradesh

Tender For corrigendum : 3rd call for supply installation commissioning of cold aisle containment and provision of iron grill mesh partition in data hall 6 at apsdc pi data center mangalagiri to segregate apsdc apsfl racks

CTN :45605463

25 Jun, 2026 2.47 Crore

Multi City - Karnataka

Tender For comprehensive development of parks playgrounds and buildings by providing pathways ornamental grill lighting works play equipments gym equipment tensile membrance and other balance works to parks palygrounds and buildings in chickpet assembly constituency

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

State Government

CTN :45325008

02 Jun, 2026 NA

Nadia - West Bengal

Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x

Central Government/Public Sector

CTN :45314789

25 May, 2026 NA

Hyderabad - Telangana

Tender For supplying, fabricating and fixing in position aluminium sliding window/s with aluminium diamond grill mesh at the landings / mid-landings of staircase at rbi staff quarters, yellareddyguda, hyderabad (date of nit available: may 22, 2026)

State Government

CTN :45146628

20 May, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of building material and other - cement (ppc—birla/prism/ultratech brands, manufactured within the last 3 months, in 50 kg bags); aggregate (6 mm standard size crushed stone); aggregate (12 mm standard size crushed stone); aggregate (20 mm standard size crushed stone); aggregate (40 mm standard size crushed stone); steel reinforcement bars (isi-marked): 8 mm, 10 mm, 12 mm, 16 mm; allahabad bricks (no. 1, no. 2, no. 3); paver blocks; fly ash bricks (high quality, size: 8" x 4" x 5"); high-grade murrum; stone dust; tiles: kajaria single charge (1' x 2'), johnson single charge (1' x 2'), kamdhenu single charge (1' x 2'), kajaria double charge (1' x 2'), kajaria single charge (1.5' x 2'), johnson single charge (1.5' x 2'), kamdhenu single charge (1.5' x 2'), kajaria double charge (1.5' x 2'), johnson double charge (1.5' x 2'), kamdhenu double charge (1.5' x 2'), kajaria single charge (2' x 2'), johnson single charge (2' x 2'), kamdhenu single charge (2' x 2'), kajaria double charge (2' x 2'), johnson double charge (2' x 2'). kamdhenu double charge 2x2 tiles; kajaria single charge 2x4 tiles; johnson single charge 2x4 tiles; kamdhenu single charge 2x4 tiles; kajaria double charge 2x4 tiles; johnson double charge 2x4 tiles; kamdhenu double charge 2x4; marble; kota stone; oka (9x9x9); lime; ochre (geru); binding wire; biranchi steel t-sections (isi) [delivered on-site, including fittings]; profile sheets (isi) [delivered on-site, including fittings]; high-quality cement sheets [delivered on-site, including fittings]; iron grills/mesh; iron angles; locks; l-drops; stone soling (rough stone); putty (double coat) [delivered on-site, including application]; door frames & doors (sal wood) 7'0" x 3'6" [complete with fittings; wood size: double patti 5"x3"]; door frames & doors (sal wood) 7'0" x 2'9" [complete with fittings; wood size: double patti 4"x3"]; window frames (sal wood) 5'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; window frames (sal wood) 4'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; door frames (sal wood) 3'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; ventilator frames (sal wood) 2'0" x 1'6" [complete with fittings; wood size: double patti 4"x3"]; flush doors (branded company, laminated) 7'0" x 3'6" x 1-1/4". laminated flush door (brand: laminated door brands company), size: 7' x 3' x 1-1/4" (includes complete steel hardware and fittings/locks); door shutter (beeja wood), size: 7' x 3' x 1-1/4" (includes complete steel hardware and fittings/locks); panel door (beeja wood), size: 7' x 3' x 1-1/4" (includes complete hardware, glass, and fittings/locks); window shutter (laminated board), size: 5' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 4' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 3' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 5' x 4' x 1-1/4" (panel shutter; includes complete steel hardware and glass); window shutter (laminated board), size: 4' x 4' x 1-1/4" (panel shutter; includes complete steel hardware and glass); window shutter (beeja wood), size: 3' x 4' x 1-1/4" (panel shutter; includes complete steel hardware, glass, and fittings/locks); aluminum sliding window (per sq. meter; includes material, glass, hylam ply, and fittings/locks; gauge 18/20); aluminum sliding door (per sq. meter; includes material and complete fittings/locks; gauge 16/18/20); ventilator, size: 2' x 1' x 1-1/4"; distemper (white and colored); emersion high-quality paint (white and colored) for interiors; emersion high-quality paint (white and colored) for exteriors; wood polish (clear); brush. 1" brush, 2" brush, 3" brush, 4" brush, 5" brush, 6" brush, paint roller, turpentine oil, starter white (100 ml), paste green (100 ml), paste red (100 ml), mosquito netting, berger paints (white & co

Central Government / Public Sector

CTN :45146098

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12231ms26b,98050175, quantity- 79.350 mts. scrap condemned unserviceable ms-gi-ci rusted, corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. locations- bin no- 231, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery.

Grill Mesh Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors