Latest grilles Tenders | Government grilles Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45696549

06 Jul, 2026 NA

Krishnanagar - West Bengal

Tender For selection of local market rate for various items of work forpreparation of scheme estimate for implementation ofmgnrega & vbgramg schemes. --thermocol 12.5 mm thick., polythene sheet (150 gm per sqm)150 microns (or 0.15 mm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank (without prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank(with prop )(25mm-30 mm) including all fittings ., hire charge of shuttering plank( with prop (30mm 37 mm ) including all fittings ., hire charges of vibrator (needle type 40 mm), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail (size1" to 2.5"), 1220. wire mesh (rabbit), glue (fevicol), 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates(size 5mm to 10mm), unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs)(specification- as per amc including fitting & fixing), display board(community)(specification- as per amc including fitting & fixing), g.i. wire(weight 100 mtrs/. kg), coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior) normal, cement primer(exterior)water proof, primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings conforming to is-13592-1992 (a) (i) single socketed 3 meter length (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings conforming tois:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete. a) upvc pipes: (ii) 110 mm. dia., b) upvc fittings: a) plain tee (ii) 110 mm. dia., d) shoe (ii) 110 mm. dia, colour interlock c.c paver block ( 60 mm thick interlocking designer concrete paver block m-35 grade ), precast chequered cement tiles 22 mm thick dark shade using, precast chequered cement tiles 22 mm thick medium shade, upvcbend 87.50, 110 mm bend, upvc pipe clip 110 mm bend, check valve 32mm, check valve 40mm, bamboo 25 mm dia 2.5 meter long, bamboo ( 8 cm- 10 cm dia) including fixing, polyethylene water storage tank with cover and suitable locking arrangement ., supply of g. i. pipes of tata make including necessary sockets - 15 mm dia.(medium quality), supply of g. i. pipes of tata make including necessary sockets - 25 mm dia.(medium quality), chlorinated polyvinyl-chloride(cpvc) pipe 25mm outer dia., chlorinated polyvinyl-chloride(cpvc) pipe 15mm outer dia., 15 mm ptmt bib cock, ptmt push cock 15 mm dia, mirror of superior make glass 60x45 cm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe), upvc pipes (w

CTN :45660352

23 Jun, 2026 41.26 Lacs

Multi City - Bihar

Tender For installation of window grilles in all prison cells and grille work on the first-floor veranda at mandal kara , samastipur.

Central Government/Public Sector

CTN :45637859

02 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released/condemned & unserviceable miscellaneous wooden scrap with or without minor ferrous attachment consisting, {doors, windows, wood grilles, wooden lattice doors, firewood, wooden doors and grilles of various types and sizes, doorframes, tree trunks, tree branches, etc.; as well as window frames (along with steel hinges and similar fittings)}, total qty-7.500 mt, location-1. sse-works-mgn office compound., 2. km 574/21 up side distance from track is 45 mtr. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted for easy loading only, custodian sse-works-mgn, fdp-50 days.

Central Government/Public Sector

CTN :45637865

02 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released/condemned & unserviceable miscellaneous wooden scrap with or without minor ferrous attachment consisting, {doors, windows, wood grilles, wooden lattice doors, firewood, wooden doors and grilles of various types and sizes, doorframes, tree trunks, tree branches, etc.; as well as window frames (along with steel hinges and similar fittings).,qty-7.500 mt, location-1. sse-works-mgn office compound., 2. km 574/21 up side distance from track is 45 mtr. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted for loadable size only, custodian sse-works-mgn, fdp-50 days.

CTN :45622558

25 Jun, 2026 7.33 Lacs

Agra - Uttar Pradesh

Tender For work of installing granite stone and steel grilles on the statue of maharana sangram singh (rana sanga) opposite speed color lab in the hariparvat zone.

CTN :45605463

25 Jun, 2026 2.47 Crore

Multi City - Karnataka

Tender For comprehensive development of parks playgrounds and buildings by providing pathways ornamental grill lighting works play equipments gym equipment tensile membrance and other balance works to parks palygrounds and buildings in chickpet assembly constituency

CTN :45581898

22 Jun, 2026 1.54 Lacs

Vidisha - Madhya Pradesh

Tender For construction work of covering well and grilles at ward no 09 imambara kua and jheel kua vidisha.

CTN :45553070

14 Jun, 2026 41.26 Lacs

Multi City - Bihar

Tender For installation of window grilles in all prison cells and grille work on the first-floor veranda at mandal kara , samastipur.

CTN :45498111

23 Jun, 2026 32.35 Lacs

Khurja - Uttar Pradesh

Tender For construction of the main gate of the khurja municipal council office in ward no. 9, along with work involving granite, iron grilles, fancy lights, etc., on the walls.

Grilles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector