Latest grinding cable Tenders | Government grinding cable Tenders

Central Government/Public Sector

CTN :43866843

14 Apr, 2026 19.90 Crore

Cuddapah - Andhra Pradesh

Tender For bid to ras corrigendum : tender for supply of design and engineering of imcc panel 2 nos and vfds and plc network , design and engineering of apfc and hvac , design and engineering of apfc and field instruments , design and engineering of cables and termination and airconditioning for imcc building , design and engineering of earthing of imcc , field equipments and soil testing , design and engineering of civil buildings and structure foundations , design and engineering of imcc building with earthing system , design and engineering of structural works for cable laying for both incoming and outgoing cables , design and engineering of lighting system of imcc building , equipment locations at ccr ground floor and along the structural path for cable route , design of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , supply of imcc panels , vfd panels , supply of apfc panels , hvac system/ air conditioning systems for imcc building and other area air conditioners as mentioned in scope of work , supply of mldb , lighting distribution boards , lighting material including db , light fittings , and all related accessories or wiring material and other electrics etc , supply of field instruments and necessary piping materials as required , supply of plc and other related required accessories , supply of lt cables and other related accessories for electrical , termination material and other instrumentation cables etc and other related electrics as required , supply of cable trays for electrical and instrumentation , supply of all earthing material as per is 3043 for imcc and connection to earth pits for motors , panels etc , supply of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , erection , testing , commissioning , and handover of equipments of imcc panels and vfd panels , erection , testing , commissioning , and handover of equipments of apfc panels and hvac system , erection , testing , commissioning , and handover of equipments of lighting system as per above supply , erection , testing , commissioning of earthing system , erection , testing , commissioning of field instruments and necessary piping materials etc as required , erection , testing , commissioning and handover of plc , erection , laying , testing and commissioning of lt cables cable terminations wherever required along with necessary accessories is in the scope of the contractor for electrical and instrumentation , erection , testing and commissioning of cable trays for electrical and instrumentation , erection , testing and commissioning of fire detection and alarm system for building and cable alley area along with integration and display at fire station or existing control centre , substructure excavation , foundation works footings , columns up to plinth level , dpc damp proof course , and backfilling. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork up to ground floor , finishes plastering , flooring tiles , marble , painting , wall cladding , and other interior or exterior finishes , plumbing works , fixing of doors up to ground floor. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork for subsequent floors as per approved design , finishes plastering , flooring tiles , marble , painting , wall cladding , and other interior or exterior finishes , plumbing works , fixing of doors for subsequent floors as per approved design , supply and erection of structural works for cable laying for both incoming and outgoing cables

CTN :44803868

29 Apr, 2026 68.92 Lacs

Multi City - Chhattisgarh

Tender For . clear water pumping machinery at 10 mld wt a. two nos. centrifugal pump with motor discharge 342.6 m³/hr (95.16 lps) head 76 m b. including star delta starter 2 incomer 2 and 3 no outgoing (l&t,abb, simens) foundation, pipes, with specials, control panel, sluice valve(inlet & outlet) ,non return valves(outlet) 2 , aluminium armoured cable 240 sqmm 3.5 core, coper cable 70 sqmm single core, earthing (each pumps motor),pressure gauging ,tools, spares and lifting arrangement (10 to 32 no. and 24 inch pipe range, nose playar, player hd)

CTN :44433701

30 Mar, 2026 NA

Multi City - Multi State

Tender For bid to ras supply of xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , supply and fixing of 40 mm dia galvanized iron tube medium grade for cable protection , supply and fixing of 80 mm dia galvanized iron tube medium grade for cable protection , supply and fixing of concealed point wiring comp using 2.5 sqmm pvc insultated cable,for one 5 pin, 15 amps socket outlet in the independent board complete all as spd and directed. , supply and fixing of switch socket combination 2 in 1, 5 amps by 16 amps flush type. , supply and fixing of distribution board db made out of sheet metal enclosure , vtpn 6 way with provision of 4 pole mccb 63 by 100 as incomer and sp,tp,tpn mcbs as outgoing. , supply and fixing of distribution board db made out of sheet metal enclosure tpn 4 way with 200 amps rated. , supply and fixing of distribution board db made out of sheet metal enclosure spn 8 way 240 volts double door type. , supply and fixing of single pole and neutral enclouser with a two pin and earth plug and socket complete with one mcb single pole 20 amps. , supply,fixing, installation, testing and commissioning of lt control panel outdoor type of size 1.5x1.5x0.75 m having provision of double door openings , supply, fixing, installation, testing and commissioning of lt control panel outdoor type of size 1.5x1.5x0.75 m double door openings into two halves with rubber beadings cubical type , supply,fixing, installation, testing and commissioning of lt bus bar feeder piller box outdoor type having provision of double door opeaning , supply of digging and laying excavation in trenches post holes in soft loose soil not exceeding 1.5 mtr wide , supply of digging and laying excavated material soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point. , returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft by loose soil complete. , supply of digging and laying for sand cushioning for ug cable 8 cm before laying the cable and 15cm after laying and stretching the cable complete , supply and laying for fly ash bricks well purnt old size designation laid dry flat for protection of cable 75 per 1000 nos , supply and fixing of pcc m-7.5 nominal mix type d-2 using 40mm graded stone aggregate. , supply and fixing of pcc m-15 nominal mix type b-1 using 20mm graded stone aggregate , disconnecting and taking out from trenches taking down from pole unserviceable lt ug cable of any size and removal from site complete. , boring under road and foot path for inserting 40 by 50 mm bore gl tubing for drawing ug cable , boring under road and foot path for inserting 80 by 100 mm bore gl tubing for drawing ug cable //bid details 2 / 41

Central Government/Public Sector

CTN :44631337

04 Apr, 2026 NA

Dhanbad - Jharkhand

Tender For supply of copper bus bar 300 amps, auxillary transformer 50va pri 500/525/550v sec-0-8-12, 0-110v, auxillary transformer 100va pri 500/525/550v sec-0-8-12, 0-110v, dmc terminal for i/c & t/g 800 amp, dmc terminal for outgoing/partition 200 amp, 3 pole magnetic o/l relay type direct acting, ct for ammeter, earth leakage relay complete (w.o. transformer) 1 to 75a, single phase preventor cop-20 (pfr), i/c & t.c cable box complete ps-3 without gland, i/o/g cable for complete fs-4 without gland for s/d starter), 3 pole magnetic o/l relay type ct operated, ct for overload relay, sensitive earth leakage relay with cbct & pt e/l setting 50μα το 750 ma with time delay 0.1 to 1 sec in step of 0.1 second with test & resect micro switch & connection wire

State Government

CTN :44539772

09 Apr, 2026 NA

Ukai - Gujarat

Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

CTN :44559539

03 Apr, 2026 NA

Delhi - Delhi

Tender For s r of e i fans in dr brairch at aiims new delhi sh supply, installation, testing and commissioning of 30kva three phase input and three phase output supply ups at 1st floor room no 156 and supply, installation, testing and commissioning of 40kva ups three phase input and three phase output supply at 4th floor room no 417 and 418 along with cubical panel incoming and outgoing cable sh a ups work sh b electrical work

Central Government/Public Sector

CTN :44482194

30 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of 4.5kw brushless alternator including rectifier cum regulator along with belt tensioning device for 110v dc train lighting system as per rdso specn no.rdso/pe/spec/tl/0054-2003 rev '0' with amendment no.1&2. each set consists of (a)one alternator with 2nos of safety chains(b)one alternator pulley with securing nut & locking arrangement(c)one rectifier cum regulator(d)crimping socket for alternator and regulator for outgoing/incoming cable(e)one tensioning gear assembly(f)one langer pin to suspend the alternator(g)one axle pulley,2nos rubber pads and fasteners etc(h)one instruction manual.

Grinding Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector