Latest grinding scrap Tenders | Government grinding scrap Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45319049

04 Jun, 2026 NA

Kozhikode - Kerala

Tender For supply of wet grinder 5 ltrs

Central Government/Public Sector

CTN :45274332

17 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For expression of interest for disposal of furnitures scrap and other items iron cot , steel almirah - big size , steel almirah - small size , rolling chair blue , rolling chair black , art table , faculty table , canteen chair , plastic molded chairs , classroom rolling chair iron , writing table with pad , boys hostel student table , wire chair with pad , white board , green board , mannequin male , mannequin female , plate sterilizer , iron table with vaccum suction , wet grinder (g.h) , dall grinding machine (g.h) , dress form stand , charkha td , lift supporting iron materials , food serving table heat , dress form half size with stand , dress form full size , dress form kids , dress form without stand , mannequin - kids , patient cot , library table wood , pattern table , freezer , grinding machine , cycle , fryer , aluminium door , cartridge (empty)

CTN :45086449

26 May, 2026 NA

Tinsukia - Assam

Tender For bid to ras supply of wet masala grinder

CTN :45307135

03 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of wet grinder , masala trolley , milk boiler , pencil cells aa , pencil cells aaa , grass cutting wire , v7 pen blue cartridge , v10 pen blue and red , poker , sacle steel

CTN :45243141

09 Jun, 2026 12.78 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp - procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp, cam segment for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, shaft with shaft struct & shaft sleeve for bottom ash crusher dcips moc-en24 & ss 410,drawing no 25p06-t-1b-582, wear plate front for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate back for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate side for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, gland for packing for bottom ash crusher dcips moc-ci fg-260 is:210,drawing no 25p06-t-1b-582, packing gland follower for bottom ash crusher dcips moc-bronze ltb 2,is:318,drawing no 25p06-t-1b-582, packing gland flange for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582, lantern ring for bottom ash crusher dcips moc:brass ltb-2,is318,as per dcips drawing no 25p06-1b-t-722, labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips, cam bolt for exen crusher for bottom ash crusher size: m20 x 65 long,sq.head,thread length 34 mm with nut,lock nut & spring washer.m.o.c: en8, chain simplex for bottom ash crusher dcips drawing no 25p06-t-1b-582, sprocket drive and driven for bottom ash crusher dcips drg.no.28p03-1b-t-582(rev-2), feed sump for bottom ash clinker crusher for bottom ash crusher dcips as per dcips drawing no 25p06-1b-t-722, nozzle tip with ceramic insert # 2,13 dcips for jet propulsion pump,part no-2&13,as per dcips drawing n0.-25p06-1b-t-591# for jet propulsion pump,as per dcips drawing n0.-2 5p06-1b-t-591 sgtpp1, nozzle inlet for jet pump for jet pump sgtpp dcips moc: fg,is 210,as per dcips dwg no 25p06-t-1b-591, throat cum disch pipe of jet pump for jet pump sgtpp dcips moc: durite(bhn 500-550),as per dcips dwg no 25p06-t-1b-591, punched washer type a for jet pump,moc:ss410/416,as per dcips punched washer (type dcips punched washer (type a) for m 20 bolts is 2016 of of jet pulsion pump,as per drawing,part no-05,material: steel, guide angle lh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, guide angle rh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, gate roler fitted with bush for ba feed gate dcips drawing no-25p06-t-1b-572,material-steel-is:1030, renewable seat lip for ba feed gate for ba feed gate dcips moc-ms is:2062 with ss316 lip,drawing no 25p06-1b-t-572, adjustable seating wedge # for bottom ash feed gate assembly as per drawing no.28p03-1b-t-576(rev-2), enclosure cover plate # dcips for bottom ash hopper feed gate enclosure, moc:ms,is:2062,10mm thk,as per dcips drawing no 25p06-t-1b-572, gasket,for ba feed gate access door for bottom ash moc: neoprene rubber , dcips drg no: 25p06-1b-t-572, gasket for feed gate enclosure for ba feed ga moc: neoprene rubber, elbow,200nb x45 for wet ash system sgtpp dcips moc: durite (alloy c.i),bhn:450-500,as per dcips dwg no 25p06-1b-t-831, elbow,200nb x90 for wet ash system sgtpp moc: durite (alloy c.i) bhn:450-500.as per dcips dwg no 25p06-1b-t-835, lateral,200nbx45 p/p/p for wet ash system sgtpp ba slurry line.moc: durite(alloy c.i) bhn: 450-500, guide angle bracket for ba feed gate for ba feed gate dcips moc-ci fg-220 is:210,drawing no 25p06-1b-t-572

CTN :44938480

26 May, 2026 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of k6, knd/niv/bk/81 wet masala grinder

CTN :45228398

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of bottom ash and wet ash spares for overhauling of unit 3 under ahp mm - nozzle for air washer (dry for fly ash system size: 5 mm dia,for ahp-ii, nozzle with insert # tip dia 9 mm of insert,moc-ss 410 (nozzle),ceramic,hardness 7708 mohs,ahp-i# for 10in wetting head,make-dcips,pn-6,7, inlet section fr wetting head10" of ahpi ( one side bevelled and others side plain (b/p),after 90 degree 10" elbow for wetting head. moc: durite 450bhn ), adaptor for collector tank ( one side bevelled and others side flanged with holes. mat: durite 450bhn ), adapter b/b # for ahp-i,below wetting head# for collection tank ( both sides bevelled. mat: durite 450bhn ), tail piece after combining tube,ahp-ifor ba slurry line,make-dcips ( one side bevelled and others side plain (b/p),after combining tube. moc: durite 550bhn ), complete assembly of jet pulsion p/p moc: durite 550 bhn for body,ss-410 for nozzle tip,ceramic 7 moh min for nozzle insert,cap.-60 t/h,pr.-10 kg/cm2 for ahp-i, combining tube # dcips make-dcips,part no.-1,moc: durite,550 bhn,for ahp-i ( hydrostatic test pressure at shop: 9 kg per sq cm (g). ), drain pit jet pump,ejector type # complete assy with water inlet elbow,pipe with flange,bolts and nuts and foundation bolts ( discharge rate of 35 # 50 cubic mtrs. / hour, horizontal distance of 150 # 160 mtrs with an elevation of 10 mtrs from gound level (0.00 mtrs), sump volume : 45 cubic mtrs. one no. orifice for discharge line with each of ejector jet pump is required with other accessories. ), ba hopper,feed sump/chute for bottom ash hopper, nozzle # of seal trough,for ba hopper,ahp-i# for ba hopper,ahp-i ( nozzle with holder. ), inspection window assembly looking glass dia 224 mm th 12 mm for ahp-ifor ba hopper, inspection window glass,200m # ( moc: borosilicate glass. ), shaft sleeve for clinker grinder for make-ucc/dcips,pno. 15 moc ss 410, 350 bhn, for ahp-i, cambolt,nut,locknut # moc-ss 410(cambolt) heat treated to rc 32-34,metric m 20 coarse a2-70,is 1363 (nut# for ba clinker grinder ( 1set=32 nos 1. moc: ss-420 (cam bolt) heat treated to rc 32-34. metric m20 coarse a2-70, is 1363 (nut). 2. 01 set: ), packing gland follower # moc: bronze ltb-2 is 318,for ahp-1 ( for ba excen crusher 1. part no.-12 2. moc: bronze, ltb:2 is:318 ), labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips ( for ba excen crusher 1. part no.-13 2. moc: ms is 2062 gr-a. ), chain # no of link-118,for ahp-i ( for clinker grinder of ahp-i. no of link: 118. ), small size sprocket for ahp-1 bktpp for gear box,for ahp-i, packing gland housing # moc: ci fg 220 is: 210,for ahp-i ( for ba excen crusher 1. part no.-9 2. moc: ci fg 220 is: 210. ), slinger for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582 ( for ba excen crusher 1. part no.-14 2. moc: ms is 2062 gr-a. ), cam for clinker grinder # heat treated & normalised for ahp-i# for moc:hi chrome alloy with 22% to 27% cr, gate face of feed gate # moc-ss 316 for ahp-i ( moc: ss - 316. including m12x65, csk hd soc. cap bolt, nut, washer. ), adjustable seating wedge # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate. moc: ms, is: 2062 gr a. ), roller # moc-steel.is:1030 for-ahp-i ( for feed gate of ba crusher. moc: steel, is: 1030. ), gland follower for indicator rod dcips of feed gate, ahp-i, guide angle l.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), guide angle r.h # moc-ms,is:2062 gr-a for-ahp-i ( for feed gate ), indicator rod # moc-s.s,size: 21mm dia.(solid) and 1400 mm long with both ends threaded and nuts,stg-i# for bottom ash hopper feed gate

CTN :45096060

29 May, 2026 NA

Ernakulam - Kerala

Tender For supply of general items - neumatic piston pump for, emptying oil from l.o drum, (manually operated barrel, pump), mcb-3 pole 10 a, mcb-2 pole 10 a, mcb 2pole 20 amps, mcb 3 pole c 32 amps, fuse mro - 2a, fuse mro - 4a, fuse mro - 6a, fuse mro - 16a, a10 s solo detector tester, (hfc/free smoke), hot water boiler 20 ltr, denki engineering co, 220v/3kw, tester 230v / 2w, bearing puller 3-leg 10 inch, bearing puller 2-leg 10 inch, m-10 bolt and nut with, washer- 17mm, m-12 bolt and nut with, washer- 19mm, m-16 bolt and nut with, washer- 24mm, bench wise 5", taparia punching tools set, 16 pieces, feeler guage metric 0.05to, 2mm, high pressure washer bosch, aqua tech 125, spectra park 309 cooling, water test kit part no. 739466, racor nb liquid part no., 571356, neumatic needle gun with, spare needles, felt filter (10mm thick x 30, mtr length, descaling liquid part no., 571653, sea clean plus part no., 654715, enviro clean part no. 765018, electrsolve e part no. 604389, submersible pump vertical, 1hp, 230v crompton brand, rain coat long single pice, size - m-l-xl-xxl water proof,, any reputed brand for, marine use, lemon grass oil highly, concentrated in one ltr, sealed bottle, pillow microfiber standard, size 51 x 66 cm, any reputed, brand (recron, kurlon,, sleepwell, wakfit), hand pump for clearing, basin blocks (make mr, plussection), tiffin carrier, (milton/nolta) with 3 layer, gmdss battery for walky, takie make-icom bp-234,, lithium, battery pack 9.0 v,, 3300mah, 30wh, gmdss battery for walky, takie make-ental, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- sailor, lithium,, battery pack 9.0 v, 3300mah,, 30wh, gmdss battery for walky, takie make- mucmurdo,, lithium, battery pack 9.0 v,, 3300mah, 30wh, embarcation ladder, without spreader length, beween 4 to 9 mtr as per mmd, standard with approval, certificate ( quote on per, mtr basis), pilot ladder with spreader, length beween 4 to 9 mtr as, per mmd standard with, approval certificate ( quote, on per mtr basis), safety helmet good quality, ( white/yellow/orange), colurs, flux coated soldering wire, (gram), glass tube fuse - 793650, glass tube fuse - 793651, glass tube fuse - 793652, glass tube fuse - 793653, glass tube fuse - 793655, glass tube fuse - 793656, glass tube fuse - 793657, glass tube fuse - 793658, electrical working gloves, (pair), electrical line tester, (medium), stud extractor (set), wilden pump 1 inch, (pneumatic pump, butterfly valve - dn - 50 mm, butterfly valve - dn - 75 mm, butterfly valve - dn - 100 mm, butterfly valve - dn - 125 mm, butterfly valve - dn - 150 mm, multiangle anvil cutter, external circlip remover, (large, medium & small), internal circlip remover, (large, medium & small), portable hand drill bosch, (220v - 50hz), cutting wheel 4 inch size, hand grinder machine bosch, (220v - 50hz), glass wool type - 4 inch x 10, mtr roll, engine cooling water, testing kit(drew/equalent), bamboo plywood 6x4 feet,, thickness 10 mm, used bycycle tube, double door deep freezer, hard top chest freezer,, make blue/volras/hair,310, ltr or neares, single door deep freezer,, hard top chest freezer,, make blue/volras/hair,130, ltr or neares, microwave oven, make, bajaj/wirlpool/lg - 2310 etc,, capacity 23l, rating - 230v,, power input - 1300 w,, (microwave), 1200w (grill),, 1200w (convention), power, out put 800w, frequency -, 2450 mhz, temprid sc insecticide for, bed bugs and cocroches, control - 500 ml, semi automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), fully automatic washing, machine 7 kg any reputed, brand ( worlpool/lg/hair), vaccum cleaner portable, (bosch, black and decker), mixer grinder, 4 jar, 750 watts, (lakshmi, butterfly preethi), television android 32 inch, led (sumsung/lg), television android 42 inch, led (sumsung/lg), wet grinder heavy duty, boiler suit orange colur sizes-m-l-xl- xxl, safety shoe with steel toe, size-6-7-8-9-10-11 any reputed, brand, rate trap, metal rate trap

CTN :44975562

21 May, 2026 1.65 Lacs

Bhadradri Kothagudem - Telangana

Tender For corrigendum : procurement of wet grinder(10kg capacity) for use at canteen of koyagudem ocp, yellandu area

Grinding Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector