Latest grit removal mechanism repair Tenders | Government grit removal mechanism repair Tenders

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Central Government/Public Sector

CTN :45592920

23 Jun, 2026 NA

Shoranur - Kerala

Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf ac coaches 3 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following reclaimable items. 1} coach no. special repair accn 056905 (year built 2005), ds-8 no. 334716 dt 31.03.26, mechanical rc items are common for all three coaches as per sse/c&w/srr letter dt 24.01.2026- 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 sets, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributor valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] cut off angle cock- 4 nos. 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no. electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026- 1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] bldc fan 400 mm-8 nos. 6] 150mm fan- 4 nos 7] exhaust fan-04 nos 8]5 w led with fittings (double led)- 16 nos 9] 5 w led with fittings (single) - 5 nos 10] 2w led 8 nos 11] emergency light unit-3 nos 12] d type led fitting - 5 nos 13] md switch-32 nos 14] mobile charger - 16 nos 15] axle pulley -4 nos 16] pumb - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -1 no 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units.. 2} coach no. special repair accn 056904 (year built 2005), ds-8 no. 334717 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator 25 kw - 2 nos 2] regulator - 2 nos 3] vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] emergency light unit-2 nos 8] 150mm fan- 4 nos 9] exhaust fan-04 nos 10] 5 w led with fittings (double led)- 18 nos 11] 5 w led with fittings (single) - 1 no 12] 5 w led -5 nos 13] axle pulley -4 nos 14] pump - 2 nos 15] pre cooling unit -1 no 16] pre cooling socket - 2 nos 17] inverter panel -2 units 18]power panel- 1 unit 19] rmpu- 2 units.. 3} coach no. special repair accn 041198 (year built 2004), ds-8 no. 334718 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] 150mm fan- 4 nos 8] exhaust fan-04 nos 9]5 w led with fittings (double led)- 18 nos 10] 5 w led with fittings (single) - 6 nos 11] d type 5 w led 2 nos 12] 2 w led-8 nos 13] md switch-32 nos 14] mobile charger - 8 nos 15] axle pulley -4 nos 16] pump - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -2 nos 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units. custodian sse/ c&w/ shoranur.

Central Government/Public Sector

CTN :45592921

23 Jun, 2026 NA

Shoranur - Kerala

Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf ac coaches 2 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following reclaimable items. 1} coach no. special repair accn 051083 (year built 2005), ds-8 no. 334705 dt 02.04.2026, mechanical rc items as per sse/c&w/srr letter dt 14.01.2026, coach no. special repair accn 051083- 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos each 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors 4 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributer valve complete full set 1 set, 8] cut off angle cock- 4 nos. 9] dirt collector- 2 nos electrical rc items as per sse/electrical/srr letter no. elg/srr/6a dt 03.03.2026 and lot inspection report dtd 10.06.26- 1] alternator 25 kw 2 nos, 2] regulator - 2 nos, 3]vrla battery 1100 ah -56 nos, 4] tensioning device 4 nos, 5] inverter 2 nos, 6] pre-cooling transformer amalgamated 1 unit, 7] power panel 1 unit, 8] mobile charger 16 nos, 9] emergency light unit 2 nos, 10] md switch 32 nos, 11] fan 400 mm sweep 1 no, 12] 150mm fan 4 nos, 13] exhaust fan 04 nos, 14] fan 200 mm 7 nos, 15] 5 w led with fittings 24 nos 16] 2w led (night lamp) 8 nos, 17] axle pulley 4 nos, 18] wra 2 nos, 19] change over switch 02 nos, 20] inverter panel 2 units, 21] rmpu 2 units 22] pre-cooling socket 2 nos 2} coach no. special repair wgaccn 056143 (year built 2005), ds-8 no. 334708 dt 21.04.2026, mechanical rc items as per sse/c&w/srr letter dt 15.04.2026, coach no. special repair wgaccn 056143. 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos each 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 sets, 4] bogie mounted brake cylinder 4 nos, 5] main doors 4 nos, 6] wearing piece( bronze) and plate 4 nos, 7] distributor valve complete full set 1 set, 8] cut off angle cock- 4 nos. 9] dirt collector- 2 nos. electrical rc items as per sse/electrical/srr letter no. elg/srr/6a dt 17.04.2026 and lot inspection report dtd 10/06/2026-1] regulator 25 kw 2 nos, 2]vrla battery 56 nos, 3] inverter 2 nos, 4] bldc fan 8 nos, 5] emergency light unit 2 nos, 6] 150mm fan 4 nos, 7] exhaust fan 04 nos, 8] 5 w led with fittings 21 nos, 9] night lamp 8 nos, 10] d type light fittings 4 nos, 11] mobile charger 16 nos, 12] pump 2 nos, 13] pre-cooling unit 1 no, 14] pre-cooling socket 1 no, 15] power panel 1 unit, 16] inverter panel 2 units, 17] rmpu 2 units 18] alternator 2 nos 19] axle pulley 4 nos 20] md switch 32 nos 21] tension device 4 nos.. custodian sse/ c&w/ shoranur.

Central Government/Public Sector

CTN :45593447

26 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For the residual current circuit breaker (rccb) shall be 4 pole rated current 40 a, rated voltage 415 v ac, suitable for 50 hz operation, conforming to is 12640 (part 1): 2008 / iec 61008-1 :1996 or latest, and shall be isi marked with valid bis license. the rccb shall be of type ac with rated residual operating current (i n) of 30 ma, having rated residual making and breaking capacity of 1000 a, rated conditional residual short circuit current (i c) of 10 ka, and rated impulse withstand voltage of 4 kv. the device shall have ip20 degree of protection, electrical/mechanical life of not less than 10,000 operations, and shall comply with emc requirements. it shall be suitable for vertical mounting on standard din rail and shall be of instantaneous type (without time delay). the rccb shall be provided with an in-built test button facility (marked "t") to verify the healthiness of the device by creating an artificial earth leakage condition. offers shall be accepted only from manufacturers or their authorized dealers, along with manufacturer's technical datasheets. the supplier shall furnish type test reports from central government/nabl/ilac accredited laboratories to prove conformity to the specification at the time of supply. preferred makes: legrand, siemens, hager, c&s, havells, schneider electric, indo asian, l&t, abb, and lauritz knudsen. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45593565

01 Jul, 2026 NA

Nanded - Maharashtra

Tender For supply of mechanical sleeper spacer device approx 12 kg : min closing length : 260 mm : max opening length : 450mm: support plate thickness of 12 mm: tommy bar hole dia : 28mm : tommy bar length : 1m : steel material : en19 hardened. output : 5 ton. [ warranty period: 30 months after the date of delivery ] ]

CTN :45578070

23 Jun, 2026 2.24 Lacs

Multi City - Multi State

Tender For annual repair and maintenance of electrical and mechanical services dg sets ff or fa system vrf cctv substation street light etc at office building g plus 4 of central forensic science laboratory at rajarhat new town for the yaer 2026-27( sh: supply, installation, testing and commissioning of zero export export device at cfsl rajarhat new town

CTN :45559612

26 Jun, 2026 NA

Rewari - Haryana

Tender For supply of stationary face part no 14 as per drawing , stationary face part no 14.1 as per drawing , rotating face part no 15 as per drawing , rotating face part no 15.1 as per drawing , gland gasket part no 18 as per drawing , gland gasket part no 18.1 as per drawing , sleeve gasket part no 19 as per drawing , sleeve gasket part no 19.1 as per drawing , gland bushing part no 24 as per drawing , o ring gasket part no 71 as per drawing , o ring gasket part no 71.1 as per drawing , o ring gasket part no 71.2 as per drawing , o ring gasket part no 71.3 as per drawing , snap ring part no 111 as per drawing , setting device part no 103 as per drawing , backing ring part no 44 as per drawing , backing ring part no 44.1 as per drawing , coil spring part no 16 as per drawing , coil spring part no 16.1 as per drawing , assembly of mechanical seal

CTN :45521206

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of mechanical lab equipments - equipments for lab, recirculation type air contioning system kit capacity: 1 tr refrigerant: r134a hermetic compressor, single phase, 230v ac, 50hz air-cooled condenser with fan evaporator with air duct arrangement and recirculation provision expansion device: txv preferred (or capillary tube) air duct with recirculation damper temperature measurement at air inlet and outlet airflow measurement provision mounted on rigid ms frame with complete piping and controls

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

Grit Removal Mechanism Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others