Latest grommet scrap Tenders | Government grommet scrap Tenders

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

Central Government/Public Sector

CTN :45546395

19 Jun, 2026 NA

Harnaut - Bihar

Tender For supply of maintenance kit - 03 for earthing equipment. the kit consists of 6 items. special repair no.,description, rcf drg.no., qty/set is as under: a. s s bush lw71235 alt a , qty: 2per set. b. brush holder lw71238 alt nil qty:1per set. c. carbon brush. assly rcf drg no. lw71239 alt nil,qty:2 per set. d. clip assly lw71240 alt nil,qty:2 per set e. isolating bush lw71244 alt a; qty:2per set f. bracket lw71247 alt nil ; qty:1per set. spec: rcf spec edts 101 rev c amed.1 with all corrigendums including latest corrigendum-6. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45549492

24 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of repair kit for common pipe bracket consisting of 4 items as per annexure enclosed. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45354797

17 Jun, 2026 NA

Ahmednagar - Maharashtra

Tender For bid to ras supply of lidocaine lignocaine hcl septodont 2 percentage with adrenaline epinephrine 1 east 80000 latex and methyl paraben free glass , trimcianalone 5 gm , anti septic mouth wash containing sodium flouride and triclosin bottle of 100 ml , post extraction alveolar dressing material , sodium hypochlorite 5 percentage hypochlor , chloroxylenol solution potassium hydroxide 13 point 6g chloroxylenol solution 50 point 5g oleic scid to 7 point 5ml cast , hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott , haemostatic sponge gelatin 80 mm long 50 mm broad 10 mm thick , gingival retraction cord roll of 100 to120 size 000 , disposable rvg sensor sleeves pkt of 1000 , plaster dental stone pkt of 1 kg , articulating paper , bone graft biphasic synthetic hydroxyapatite and beta tricalcium phosphate granules 0 point 5 to 1cc , biograft hydroxyapatite nano 0 point 5 to1cc , wire ss round hard 0 point 8 mm coil of 500 gm , wire ss round hard 0 point 6 mm coil of 500 gm , abrasive white acrylic fig 4 for straight hand piece , blasting materials aluminium oxide grain size 250u pkt of 500gm , base acrylic resin powder clear shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , sintered diamond burs for grinding metal for shp , cones polishing rubber black set of 3 , crown bridge metal np alloy for box of 1 kg , crown and bridge polishing compound for np alloy 200 gm cake , crown bridge separating liquid 500 to 1000ml , crown and bridge spacer die 20 to 30 ml bottle with thinner , crown and bridge wetting agent bottle of 1 litre , carbide cutter pointed medium grit size 60 for shp , carbide cutter flat fissure medium grit size 60 for straight hand piece , paper glass perforated fine 7 point 6 cm wide roll of 25 mtr sandpaper , self cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml , self cure acrylic powder clear shade bottle of 110 gm with self ) /bid number : gem/2026/b/7571204 * /dated: 27-05-2026 & & / bid document 1 / 38 & & ' ' /item category cure acrylic liquid 110 ml , saw piercing blade for die cutting size 0 point 25 mm into 3 mm into 75 mm packet of 12 , wheel lathe white acrylic round edge coarse 76 point 2 into 6 point 3 mm , spray anaesthetic surface bott of 100 ml , arch wire ss preformed lower 0 point 016 round , niti close coil spring with eyelat pkt of 10 , arch wire niti copper preformed ideal uppper 0 point 016 roud , arch wire niti copper preformed ideal uppper 0 point 016into 0 point 016 square , arch wire niti copper preformed ideal uppper 0 point 016into0 point 022 rectangular , arch wire niti copper preformed ideal uppper 0 point 017into0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 019into0 point 025 rectangular , arch wire niti copper preformed ideal uppper 0 point 021into0 point 025 rectangular , universal self etch and bond bonding system sixth generation 1 to 2 bottles of 4 to 6 ml each with corresponding applicator tip , tma or cna straight length wire pkt of 10 pieces to 14 inches rectangular cross section 0 point 016 into 0 point 016 inches 0 pont 016 into 0 pont 022 inch , ss orthopedic expansion screw hyrax upper 9 mm , orthopedic expansion screw hyrax upper 11 mm , preformed molar bands upper l sizes from 34 to 40 in increments of 0 point 5 kit of 200 bands , pre adjusted bracket system set mbt with fdi numbering with bondable upper double and lower double first molar tube non convertible size 0 point 018 into 0 point 025 inches , preformed loop arch wire for retraction tma 24 to 42 , crimpable hook cross section 0 point 016 into 0 point 02 cross section 0 point 021 into 0 point 025 inch , niti expander size 32 mm or 34 mm or 36 mm or 38 mm or 40 mm or 42 mm , cotton wool absorbant pkt 500 gm , rolls absorbent cotton dental assorted sizes in box of 500 , sodium chloride solution isotonic in nontoxic dispoable plastic bottle of 500 ml //bid details 2 / 38

CTN :45559887

27 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of clutch master cylinder assy , the above mentioned clutch and gear overhauling , bs iii radiator assy , inter cooler repair , hydraulic pump assy , head gasket kit , radiator hose pipe , the above mention engine cooling system repair , lock washer and bolt set , the above mentioned engine cooling system overhauling , the above mentioned hjydraulic pump assy overhauling , field coil assy , armature assy , solenoid ignition coil , carbon push plate , the above mentioned self starter remove and refixing , chain bracket assy , chains bracket socket bearing , chains bracket cuts rubber , wheel bearing , power coil assy , the above mentioned mc repair removes the all parts and , fly wheel ring assy , loom repair and reprograming , relay assy set with sockets , the above mentioned self starter remove and refixing and , steering rod and column assy , steering gear box service kit , steering gear box seal kit , the above mentioned steering overhauling repair , crown pinon pin lock washer kit , crown repair service kit , crown seal kit , crown pin outer bearing , the above mentioned steering overhauling repair remove

CTN :45551266

01 Jul, 2026 NA

Kharagpur - West Bengal

Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

CTN :45543069

24 Jun, 2026 NA

Barmer - Rajasthan

Tender For supply of assy housing w intermediate flange , vehicle speedo sensor gb , head fuel filter , cable assy speedometer , bush ce bracket , poly v belt , combination switch , solenoid switch , repair kit hyd brake wheel cyl front , wiper blade front 600 driver , oil seal assy , locking bolt

State Government

CTN :45519882

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat chimbali. - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole 1-3-3, supplying and e

CTN :45388423

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of excavation in trenches not exc 1 point 5 mtr wide and 1 point 5 mtr deep , excavation in trenches not exc 1 point 5 mtr wide and 2 mtr deep , returning filling spreading lavelling watering and well ramming , removing excavated material not exc 50 mtr , s and l 50mm outside dia double corrugated pipe , stret light bracket welded and fixing in position complete , supply and fix steel tubular pole 410 sp 22 , 20 mm stone aggregates , 40 mm stone aggregates , pvc insulated water proof 1point 5 sqmm 3 core copper cable , s and f repair of 5kw 3 phase authomatic street light timer switch , supply and fixing street light junction box size 260mm by 210mm by 116mm , wall mounted fan 400mm with all complete accessories , supply and fix water cooler capacity 80 litre , supply and fix deep freezer glass top 320 litres and having double door , supply and fix refrigerator capacity 310 litres bee 5 star , copper wire 1 point 5 sqmm 2c with all accessories , switch socket combination 3 pin 5 or 6a , supply and fix switch socket combination 5 in 1 and 5 or 16 amps , m and l for sub main wiring with 3 run of single core 2 point 5 sqmm , supply install testing and commissioning of 50 kva voltage stabilizer , m and l for pipe earthing galvanised steel 40mm bore , supply and fix on load change over switch 4 pole 100a 415 volt , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) * /bid number : gem/2026/b/7549042 + /dated: 01-06-2026 ' ' / bid document 1 / 25

Grommet Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

State Government