Latest grooved rubber sole plate Tenders | Government grooved rubber sole plate Tenders

Central Government/Public Sector

CTN :45549013

06 Jul, 2026 NA

Latehar - Jharkhand

Tender For corrigendum : 6.2 mm thick composite grooved rubber sole plate as per rdso drg. no. t-6618 for 60 kg (uic) rails and conforming to irs specifications for cgrsp for placing beneath rails, serial no. t-55-2025 (revision-01) with latest alt. & spn. note: latest alteration/corrigendum wherever used will mean the alterations/corrigendum to drg/spec. up to the closing of tender will be applicable. [ warrantyperiod: 96 months after the date of delivery ][ rate of supply 273602 units per month , commencement time allowed -2 month ]

Central Government/Public Sector

CTN :45743220

07 Jul, 2026 NA

Kota - Rajasthan

Tender For supply of composite grooved rubber sole plate(cgrsp) - 10mm thickness for use with wider psc sleeper to drawing no. rdso/t-8746 suitable to rails 60 kg(uic) / 60e1 & 52 kg drg: (rdso) rdso/t-8747 alt-1 spec: (rdso) t- 55-2025 revision-01 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45738724

15 Jul, 2026 NA

Ukai - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt-5196g - (bmd-6) work of rubber lining of various equipments, pipes and fittings for dm plant and cpu plant of utps unit 3 to 6 on as and when required basis; as per s..

Central Government/Public Sector

CTN :45728251

24 Jul, 2026 NA

Multi City - Multi State

Tender For manufacture and supply of 10 mm thick composite grooved rubber sole plate conforming to rdso drg. no t-8998 alt. 1 for use on sharp curve with wider psc sleeper t-8979 to t-8982 suitable for 60kg (uic)/60e1 rails confirming to irs specification sl. no t- 55-2025 (revision -1) of rail pads for placing beneath rails. (the alt in drawing and specification issued by rdso up to one month priorto tender closing date shall be applicable in this tender) [ warranty period: 30 months after the dateof delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 6667 units per month , commencement time allowed -1 day ]

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.

CTN :45689246

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - repair/ refurbishment, upgradation and installation of alternative pump testing facility; as per scope of work; no; buyer premises repair of 03 nos. electromagnetic flow meter, lining hard rubber, fluid fresh water, size dn 200. flow up to 350 m3/hr.

CTN :45690654

06 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of sample tag stickers , m seal , gum bottle 700 ml , sample seal , heavy duty brass crocodile clips , cu braided wire 12.5mmx2mm , crocodile alligator clip , aluminium bucket 15 l , cotton waste , broom stick , battery duracell aa or aaa , psm soap , earthing wire 6 sqmm , cu lug for 6 sqmm cu cable , ss nut bolt with washer 4 mm x 25 mm , grooved rubber sole plates t 3703