Tender For corrigendum : manufacture and supply of composite groovedrubbersoleplate(cgrsp) 10 mm thicksuitable to rails 60 kg uic/ 60e1/52 kg & for use of wider psc (t-8746) sleeper confirming to rdso drg. no. t-8747 (alt. 1), specification : irs:t-55-2025 (revision-01). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 300000 units per month , commencement time allowed -1 day ]
Tender For manufacturing and supply of 6.2 mm thick composite groovedrubbersoleplate for 52 kg rails to rdso drg no. rdso/t-8327 & irs spn. t-55-2025 (revision-01) [ warranty period: 96 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For manufacture and supply of composite groovedrubbersoleplate(cgrsp) 10 mm thicksuitable to rails 60 kg uic/ 60e1/52 kg & for use of wider psc (t-8746) sleeper confirming to rdso drg. no. t-8747 (alt. 1), specification : irs:t-55-2025 (revision-01). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 300000 units per month , commencement time allowed -1 day ]
Tender For tender for supply of led street light fitting , ferric alum , high efficiency light led , onload changeover switch , led bulb 12 watt , ug cable armoured , mcb single pole c series 32 amp , led flood light 70 watt , ug cable armoured , rubber insertion sheet , rubber mats for electric purpose , plug top 3 pin 16 amp , residual chlorine testing kit , ht tape insulation , battery charging cable heavy duty , alluminium lugs , mcb single pole c series , socket out let modular type , switch flush type , alluminium lugs , fuse wire copper thined , fuse wire copper thined , fuse wire copper thined , gi union , alluminium lugs , gi tee , gi nipple , electrolite sulfuric acid for battery , gi socket , gi socket reducer , gi plug , sink mixer , health faucet , brass cp towel rail , brass cp bib cock with flange , brass cp sink coupling , bath room cabinate single mirror , pvc connection , glass shelf , green ply , brass cp shower rose , pvc waste pipe , brass cp bib cock , ss tower bolt , gi plug , ss tower bolt , cement white portland , zero degree hinges , bath room cabinate double mirror , overhead bathroom shower , ss sliding door bolt , brass cp concealed stop cock , wooden beading for glass pane , gi socket , gi nipple , door stopper aluminium double , brass cp centre hole mixer , bend pipe pvc , gi nipple , gi elbow , gi union , ss screw wood , ss screw wood , ss handle fabricated type , stainless steel plate rack , ready mix plaster , rubber insertion sheet , lead wool , fuse wire copper thined , steel screw , gate valve , gi tee , anti freeze coolent , nuts , bolts and washers any size and any shape , gi nipple , gi tee reducer , gi socket reducer , gi tee reducer , gi plug , gi socket reducer , distilled water , dp switch modular , wooden beading , elbow reducer , ss screw wood , gi nipple , door handle , gi nipple , gi socket , gi union , ss screw wood , flush washer for flushing cistern , gi nipple , washer pvc , nails wire
Tender For manufacture and supply of 6 mm thick pocket type nylon cord reinforced groovedrubbersoleplates for 1 in 12 turnouts 60kg to rdso layout drg. no. t-8779 (alt-3). details of nylon cord reinforced grsp to be supplied in each set is as per annexure-a. specification: confirm to irs specification t-55-2025 (rev-1). (all amendments / alterations in drawing and specification issued by rdso as on date of publishing of tender shall be applicable to this tender). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]]
Tender For supply of hardware items for m.garh w.s. mech division narnaul under jln ws circle narnaul of irrigation department haryana. - servo system oil-32 (iocl lubricants), servo electra/transformer oil (iocl lubricants), servo gem-3/grease (iocl lubricants), servo super- 40, g.i. hex. head bolt with nut (ft) (5/8 x3.5 ), g.i. hex. head bolt with nut (ft) (3/4 x3.5 ), g.i. hex. head bolt with nut (ft) (6/8 x4 ), g.i. hex. head bolt with nut (ft) (1 x6 ), g.i. hex. head bolt with nut (ft) (7/8 x3.5 ), g.i. hex. head bolt with nut (ft) (7/8 x6 ), coupling link assy. for 20cs to 50cs. pump, ht coupling bolt with nylock nut 3/4 x4 , ht coupling bolt 3/4 x 7/2 , ht coupling lock 34 , ht coupling bolt with nut m-33x180mm, ht coupling bolt and nut m33x280 mm, ht coupling bolt with rubber bush for 150cs. wpil pump, ht coupling bolt with nut & 4 no. rubber bush for 150cs, flowmore pump, g.i. hex. head bolt with nut (ft) (3/8 x3 ), ms hex. head bolt with nut (ft) (5/8 x3 ), ms hex. head bolt with nut (ft) (4/8 x2.5 ), ms hex. head bolt with nut (ft) (2.5/8 x2 ), emery paper brand:3 m, sandpaper 120 grit type:fine grit no. :120 colour :red (225mm x 275 mm), hexa blade make: taparia model: hss1218, dimension (lxwxh):30x1.1x0.1cm, cutting angle:90, log book for pump house, rubber insertion sheet 1/8 , emery paper (1 x1 ), water proof polythene
Tender For tn-25151 supply of miscellaneous rubber items at kstps, kota. - "white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubber free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area", 3.0 mm , 5.0 mm, love-joy spider set in following sizes:, l-50, l-70, l-75, l-90, l- 95, l- 100, l - 110, l - 150, l-190, l-99/100, l-225, l-226, l-276, soft seal for 600 nb b/f valve make-m/s i/l ltd. od-577, id-522 mm.pcd-548 mm. hole dia 9 mm. no. of hole-20 th-10.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , nitrile rubber gasket for 300 nbci/ ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5 mm. , nitrile rubber gasket for 150 nb wet slurry line single side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm. , rubber coupling bush for sump drain pump id=22 mm, od=38, l=40 mm, rubber pad for love joy coupling c-280 , victaulic coupling rubber gasket -18l, victaulic coupling rubber gasket -18h, "victaulic coupling rubber gasket -20l", victaulic coupling rubber gasket -20h, seal kit set 3/8" 3way solenoid valves as per sample one set contains 6 pieces, vibration damping rubber pads/block for stacker reclaimer#1 size od=210 to 200(tapper).length=125 mm centre hole dia.=85 mm (sample piece available at site), neoprene rubber coupling pad size 40x40x20 mm, neoprene rubber brush size (idxodxlength ), 20x38x40, 32x50x55, 35x55x60, rubber cushion pad c-280, tyre coupling tc-011, tyre coupling tc-019, tyre coupling tc-013, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x2.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x4.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x6.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x8.00 mm, dresser coupling rubber gasket for16'' for feed pipe, dresser coupling rubber gasket for36'' for coal valve gate raw coal feeder, gun metal rubber bush for feeder drive nitrile rubber gun metal bush id 22.5mm ,od 32mm,length 40 mm rubber bush od 44.5 mm ,length 40 mm, rock well coupling gasket 20l, enddoor gasket for stg-i (1 set consisting 2 nos. rare and 2 nos.front ), enddoor gasket for stg.-ii,iii,iv,v consisting (2 nos. rare and 2 nos.front ), rubber spider set :, sw-rrs 190/140, sw-190, rubber coupling bush for fd/pa fans of stage-i as per drawing , rubber coupling bush for fd/pa fans of stg-ii as drawing, rubber coupling bush for fd/pa fans of stg- iv/v as drawing, rubber gromet gasket for id/pa fans as per drawing u#3 to 7, victaulic coupling rubber gasket size 22l made of silicon rubber for pf pipe of u#5, 6&7. tech. specs: max. temp. 160-180 degree. a industrial grade scale, soft seal for 400 nb b/f valve make-m/s i/l ltd. od-357, id-307 mm. pcd-323 mm. hole dia 8 mm. no. of hole-16 th-9.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , rubber pad for love joy coupling swq-280/140
Tender For supply of miscellaneous rubber items at kstps, kota-white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubbe free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area3 mm5 mm.love-joy spider set in following sizes:l-50l-70l-75l-90l-95l-100l-110l-150l-190l-99/100l-225l-226l-276soft seal for 600 nb b/f valve make-m/s i/l ltd.od-577, id-522 mm.pcd-548 mm. hole dia 9 mm no. of hole-20 th-10.0 mm. material- nitrile rubbeshore hardness 60 + 5 on 'a' scale.nitrile rubber gasket for 300 nbci/ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5-mm.nitrile rubber gasket for 150 nb wet slurry linesingle side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm.rubber coupling bush for sump drain pump id=2 mm, od=38, l=40 mmrubber pad for love joy coupling c-280victaulic coupling rubber gasket -18lvictaulic coupling rubber gasket-18hvictaulic coupling rubber gasket -20lvictaulic coupling rubber gasket -20h
Tender For supply of nylon cord groovedrubbersoleplates 10 mm thick for steel channel sleepers 60 kg rails to rdso drg no. t-5156 with latest alterations if any,conforming to irs specifications for 10 mm groovedrubbersoleplates provisional 1989 with corrigendum no. 3 of oct 2016 or latest if any [ warranty period: 30 months after the date of delivery ] ]
Tender For manufacture and supply of 10 mm thick composite groovedrubbersoleplate (cgrsp) to rdso drg. no. rt-8747 alt. 01 for use with wider psc sleeper to rdso drg. no. rt-8746 suitable to 60kg (uic)/60e1 & 52kg rails and conforming to irs specification for rail pads forplacing beneath rails serial no. t-55-2025 rev. 01. (the alterations in drawing and specification issued by rdso up to the date of tender publication shall be applicable.) [ warranty period: 30 months after the date of delivery ] ]