Latest grounding plate Tenders | Government grounding plate Tenders

State Government

CTN :41052738

04 Aug, 2025 67.93 Lacs

Gandhinagar - Gujarat

Tender For supply of spares for bottom ash handling system of ash plant - unit no.3, 4 & 5 at gandhinagar tps. - shoulder bolt with lock plate for assembling part no.8 (part no.9) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., cross brace (part no.11) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., resilient gate face p.no-2,for bottom ash hopper,drg 8743/2b/571, shoulder bolt with lock plate for assemblying part no.8 (part no.9) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, cross brace (part no.11) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, gate face 1 set consists of ss:316 gate face with m.s back up plate of 24x24 squire bottom feed gate of unit no. 5, cam segment p.no-1 for 33"x30 excen crusher, front wear plate/anvil plate of 33" x 30" clinker crusher / grinder assembly for unit-3and4 (1 set equals to 3 nos.)., back wear plate/plate combing (part no. 6) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 3 nos.)., side wear plate(part no. 8) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 2 nos. left hand and 2 nos. right hand wear plate)., shaft with shaft structure and shaft sleeve of 33" x 30" clinker crusher / grinder assembly for unit-3 and 4., 33"x30" single roll clinker crusher / grinder complete assembly without drive arrangement, fluid coupling, chain drive and driven sprocket as per dwg. no.8743-2b-582(rev-1) for unit-3and4, feedsump below clinker crusher for unit no.3 and 4, roll (cam segment) 1 setequals to 8 nos. cam segment of single roll crusher for unit no. 5, front wear plate/anvil plate (part no.3) 1 set consists of 3 nos b front wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, back wear plate/plate combing (part no.6) 1 set consists of 3 nos back wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, side wear plate (part no.8) 1 set consists of 2 nos. left hand and 2 nos right hand type of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, shaft with shaft structure with shaft sleeve(part no.2 and15)for clinker grinder., bearing support (part no.8) of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, single roll crusher complete assembly without drive arrangement,fluid coupling,chain,drive and driven sprocket of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, feed sump of bottom ash system of unit - 5 as per drawing no. 95p10 - t - 1b - 711, complete assembly of feed gate housing with feedgate, access door for unit no.3 and 4, bearing housing of dcips make 33" x 30" clinker crusher/grinder, locking plate for 600 dia. round access door for bottom ash hopper, nozzle with ceramic tip(part no. 2)tip size- 36 mm of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), aligning ring(part no. 10)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), half clamp(part no. 11)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 9" flange clamp half (part no. 18) of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 8" jet pulsion pump complete assembly without tail pipe for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), nozzle with ceramic tip size 34 mm of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, aligning ring (part no.10) of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, half clamp (part no.11) 1 setequals to 2 nos of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, 9" flange clamp half (part no

Central Government/Public Sector

CTN :41043746

21 Jul, 2025 NA

Jhunjhunu - Rajasthan

Tender For tender for supply of 324800068-casing lining part no. 210240-2 , 324800069-inlet part no. 210242-m2 , 324800070-wear plate part no. 210241-m2 , 324800071-gland housing part no. 202295-1 , 324800088-impeller locking assembly part no. 2-b22-169 , 324800138-split casing front and rear , part no. 1-195447-m2 , for vasa hdt 509-150 hc pump

Central Government / Public Sector

CTN :41053244

21 Jul, 2025 NA

Multi City - Multi State

Tender For supply of m.s. plate 20x45x363 (1 in 8.5 tws turnout or locking bar assembly) as per specification i s 2062(latest) & irs s-10(latest). material steel grade a. [ warranty period: 30 months after the date of delivery ]

CTN :41060297

02 Aug, 2025 NA

Secunderabad - Telangana

Tender For name of work : procurement of essential lifesaving ortho caonsumables, medicines & medical gases - 2.7 mm/3.5 mm titanium lcp superior anterior clavicle plate with lateral extension with 6 locking option laterally (6-8 holes ,side specific) with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm low profile lcp superior anatomical clavicle plate (titanium) 06-10 holes, right/left with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm locking compression extra-articular distal humerus plates 6 - 14 holes ( left /right) titanium , with compatible locking and cortical screws for all holes (usfda/ce approved), 3.5 mm lcp olecranon plate titanium (6-10 holes) (left/ right) with compatible locking and cortical screws for all holes (usfda/ce approved), modular side locking radial head prosthesis (head size 18-28 mm ) with uncemented fluted stem(6mm-10mm) (usfd /ce approved), 2mm titanium locking compression plate, 3-6 holes with compatible locking and cortical screws for all holes (usfda/ce approved), precontoured 3.5 mm pelvic reconstruction locking plates 6-14 hole with compatible locking and cortical screws for all holes (usfda/ce approved), spring plate for acetabular wall fixation 3-5 hole with compatible locking/ cortical screws for all holes (usfda/ce approved), titanium femoral neck plate fixation system with compatible hip bolt, antirotation screw,locking screw for plate (complete set) (usfd/ce approved), intramedullary interlocking femoral nail (usfda/ce approved) 9mm-11mm x 360-420 mm trochanteric entry titanium (left/right) with 2 proximal and two dital locking screws with compatible end cap, distal femoral/supracondylar nail (titanium) 9mm-11mm x 300-360 mm with two matching proximal and two matching distal locking bolts/screws (usfd/ce approved and mri compatible), titanium reamed cannulated interlocking nail tibia(usfda/ce approved) 8 -10 mm diameter,270-360 mm length ,side specific , 5 locking option proximal and 3 locking option distal end of the nail with compatible locking bolts for all holes, titanium tibial opening wedge osteotomy plates (all sizes) with comaptible 4.5mm cotical and 6.5 mm locking screws, (limb reconstruction system )rail fixator complete set for tibia/ femur (including standard clamp,angular correction clamp,translation clamp,acute correction clamp,ring adapters, dynamization component,compression distraction unit with compatible ha coated half pins), ha coated ss self drilling schanz screws ranging from size 3.5mm - 6mm , 80-200mm length, 3.5 mm titanium self tapping cortical screws,all sizes, 3.5 mm titanium locking self tappig screws, all sizes, titanium flexible elastic nail size ranging from 1.5-4mm diameter, length 300-440mm, expert tibial nail of 9mm (titanium) dia with 3 innovative locking optionin combination with 5mm cancellous bone screw and 4mm 4 locking option in distal part.(compele range of size shape and side specific implant with instumentation at the time of surgery.implant should be usfda/eu-ce/bis standard compliant., locking compression plate 3.5mm (titanium) 6-10 hole with compatible locking and cortical screw for all holes (usfda/ce approved), jess fixator (small/medium/large)link joints -20 small connecting rod, dia : 2.5mm, length : 100 mm - 02 connecting rod , dia : 2.5 mm, length : 200 mm - 02connecting rod, dia : 2.5mm, length : 150 mm - 02l rod, dia : 2.5 mm (four)z rod, dia : 2.5 mm (two) distractor, double hole, length : 150 mm (two)distractor, double hole, length : 200 mm (two)k. wire, dia : 1.5 mm x 150 mm (four)k. wire, dia : 2.0 mm x 150 mm (two)foot plate - 01allen key 2.5 mm - 01, 5.5mm suture anchor with one ultratape and one #2 ultrabraid suture, femoral cortical suspension device (titanium) with self adjustable loop length(knotless locking system) made of continuous polyester/continuous fiber/braided polyethylene with two braided polyester sutures for arthroscopic acl reconstruction using sof

CTN :41045672

17 Jul, 2025 NA

Srinagar - Jammu And Kashmir

Tender For tender for supply of clutch assy fan , kit cold patch for tube repair(complete) , pump assy fuel , box assy steering gear , run rear window glass lh , gasket cylinder head cover , protector oil seal , s/a of strainer , plate shackle outer , towed veh warning light 24v , seal inside cover , nut , hose radiator , fly wheel holder , stand oil filter , handle door inside pull , latch hood , o ring , grommet latch release cable , gasket , cone washer locking hub , relay turn signal , o ring speedometer driven , cushion front , stud bolt no 1

CTN :41044296

21 Jul, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of collar , collar , pin , pin , locking plate , terminal earth , pole wheel wsp , support cable , plate clamping , plug , seat special , gasket , oring plug , liner , liner , adjusting liner psa , adjusting liner lba , liner jbwa , adjusting liner baa , locking plate tmdga , locking plate tmdga , locking plate psa , locking plate psa , locking plate jbea , locking plate , locking plate , locking plate , locking plate , locking plate , locking plate , locking plate , locking plate , locking plate , locking plate , lock plate a , locking plate vda , c lock plate , locking plate , locking plate , washer , washer locking

CTN :41056213

29 Aug, 2025 NA

Kanchrapara - West Bengal

Tender For supply of set of pivot ring, housing ring and locking plate for pivot ring and housing ring of wag 9 & wap7 loco. as per clw drg. no. :- i) 1209-01.313-005. alt.2 qty.=04 nos. ii) 1209-01.313-004. alt. 2 qty.=04 nos. iii) 1209-01. 413-025 alt. -1 (ref : 1&2). qty. = each ref. 12. nos. [ warranty period: 30 months after the date of delivery ]

CTN :40973905

14 Jul, 2025 NA

Jodhpur - Rajasthan

Tender For corrigendum : supply of lv7 tata 2641-7250-2302 door glass rh , lv7 tata 312-332-1073 locking plate , lv7tata 2636-1540-0102 brush box assy , lv7 tata 17672-03-000 filterfuel , lv7maruti 89031m80000 tank assy fuel

CTN :41055740

02 Aug, 2025 NA

Dehradun - Uttarakhand

Tender For supply of ccs 6.5 mm titanium with washer , lcp proximal lateral tibia 05 hole see attach the file pl. , lcp proximal lateral tibia 07 hole see attach the file pl. , adjustable flexible loop size 50 mm , lcp distal humerus locking plate see the attach file pl.