Latest gs sheet Tenders | Government gs sheet Tenders

State Government

CTN :45732640

02 Jul, 2026 48.9 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - providing and laying of base course of floors, providing and laying cement concrete flooring, providing and applying white cement based putty of average thickness, finishing walls with water proofing cement paint, finishing walls with acrylic smooth exterior paint, painting on g.s. sheet with synthetic enamel paint, repairs to plaster, removing white or colour wash by scrapping and sand papering and preparing the surface smooth.

Central Government And Public Sector

CTN :45738759

10 Jul, 2026 40.44 Lacs

Rajkot - Gujarat

Tender For supply of supply of 1.5 tr inverter type ductable ac as per bsnl specifications , itc of 1.5 tr inverter type ductable ac as per bsnl specifications , supply and fixing copper piping of 0.25 inch and 0.5inch with nitrite foam insulation as required , supply and fixing powder coated heavy duty ms stand , supply and fixing upvc pipe 25mm dia, 2mm thick , supply and fixing upvc pipe 40mm dia, 2mm thick , supplying and laying pvc insulated frls copper cable 3x1.5sqmm , supplying and laying pvc insulated frls copper cable 3x2.5sqmm , supplying and fixing dp enclosure with dp mcb , supply and fixing 5a to 32 a sp mcb in extg db as required , supplyinstalling,balancingand commissioning gss sheet ducting 0.63mm thick , supplyinstalling,balancingand commissioning gss sheet ducting 0.80mm thick , providing and fixing supply air grills powder coated , providing canvass connection

Central Government And Public Sector

CTN :45689775

15 Jul, 2026 86.18 Lacs

Ambala - Haryana

Tender For supply of 3 tr single circuit 1 or 3 phase , 1.5 tr single circuit 1 phase , itc of 1.5 or 3.0 tr dac unit , 40 x 40 x 5 mm ms angle iron , 40 x 5 mm ms flat strip , cu ref. pipe 6.4 mm dia with insulation , cu ref. pipe 9.5 mm dia with insulation , cu ref. pipe 12.7 mm dia with insulation , cu ref. pipe 15.87 mm dia with insulation , upvc pipe 40mm dia , upvc pipe 25 mm dia , 5c x 4 sqmm pvc cu cable , 3c x 1.5 sqmm pvc cu cable , 4c x 6 sqmm pvc cu cable , dp 25 or 32a 230v c mcb in encl , fp 25 or 32a 415v c mcb in encl , gss sheet ducting 0.63mm , gss sheet ducting 0.80 mm , supply air grills , 100x50x1.6 mm thick cable tray , 150x50x1.6 mm thick cable tray

Central Government/Public Sector

CTN :45671221

29 Jun, 2026 97.4 Thousand

Kanhan - Maharashtra

Tender For 1) providing and fixing of gs sheet at excavator section of aikdocm under kamptee sub area. 2) providing and fixing of ac sheet at rooms of dumper section of aikdocm under kamptee sub area.

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

State Government

CTN :45688520

16 Jul, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of ordinary portland cement opc , natural river sand , pulverised stone dust , crushed stone aggregate , exterior grade acrylic weatherproof wall paint , oil based wood primer , cement primer , synthetic enamel paint , aluminium sliding door tower bolt , aluminium tower bolt , aluminium handle , mild steel pressed butt hinge , ceramic glazed floor tile , chequered terrazzo tile , hollow concrete cement block , clear float glass pane 5.5 mm thickness , mild steel casement stay straight peg type , cement fibre board 6 mm thickness , paint brush , pre-painted galvanized iron roofing sheet , mild steel wire nails , galvanized iron level adjusting hanger , self drilling screw , marine plywood 12 mm , mild steel flat , white portland cement , semi circular plain gs sheet gutter with gi nuts bolts and washer , plain ridge cap ppgi or galvanized steel sheet , tmt reinforcement steel bar , binding wire , mild steel l-angle , mild steel t-angle , industrial grade solvent thinner * /bid number : gem/2026/b/7712155 + /dated: 25-06-2026 ' ' / bid document 1 / 35

Central Government/Public Sector

CTN :45345559

01 Jul, 2026 23.69 Lacs

Coimbatore - Tamil Nadu

Tender For corrigendum : supply of sitc of fire dampers , sitc of fire dampers in supply air duct actuator torque 9nm, 230v. , sitc of fire dampers in supply air duct actuator torque 20nm, 230v. , supply, installation, balancing and commissioning of fabricated at site gss sheet metal rectangular ducting 0.8 mm thick , supply, installation, balancing and commissioning of fabricated at site gss sheet metal rectangular ducting 1.00 mm thick , supply and fixing of acoustic lining , supplying and fixing nitrile rubber insulation 19 mm , dismantling of old airconditioning ducts , sitc of control panel for 230v actuator. , sitc of ahu tripping panel , supply of 2x1.5 sqmm copper control cables , laying and fixing cable tray , laying and fixing of xlpe power cable of 1.1 kv on wall surface upto 35 sq. mm , supplying and making end termination , integration of all devices for activiation of ahu

Central Government And Public Sector

CTN :45468915

23 Jun, 2026 40.44 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of supply of 1.5tr inverter ductable ac as per bsnl specifications , itc of 1.5 tr inverter ductable ac as per bsnl specifications , supply and fixing copper piping of 0.25 inch and0.5inch with nitrite foam insulation as required , supply and fixing powder coated heavy duty ms stand , supply and fixing upvc pipe 25mm dia, 2mm thick , supply and fixing upvc pipe 40mm dia, 2mm thick , supplying and laying pvc insulated frls copper cable 3x1.5sqmm , supplying and laying pvc insulated frls copper cable 3x2.5sqmm , supplying and fixing dp enclosure with dp mcb , supply and fixing 5a to 32 a sp mcb in extg db as required , supplyinstalling,balancingand commissioning gss sheet ducting 0.63mm thick , supplyinstalling,balancingand commissioning gss sheet ducting 0.80mm thick , providing and fixing supply air grills powder coated , providing canvass connection

State Government

CTN :45589456

25 Jun, 2026 NA

Giridh - Jharkhand

Tender For quotation rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well graded granular base

Central Government / Public Sector

CTN :45302477

20 Jun, 2026 NA

Begusarai - Bihar

Tender For corrigendum : tender for supply of sheet gasket -gskt , 1500x2000x 0.75 mm , metallic , sheet , gskt , 1500x2000x1 , klingrite , k-1000. , sheet , gskt , 1500x2000x1.5 , klingrit , k-1000 , sheet , gskt , 1500x2000x2 , klingrite , k-1000. , sheet , gskt , 1500x2000x3 , klingrite , k-1000. , sheet , gskt , 1500x2000x5 , klingrite , k-1000. , gskt sheet 3000x1500x3mm non-asb metalic

Gs Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors