Latest guard bar Tenders | Government guard bar Tenders

Central Government / Public Sector

CTN :42240173

12 Dec, 2025 NA

Paradip - Odisha

Tender For corrigendum : procurement of spares of brc in meg unit at iocl paradip refinery - procurement of spares of brc in meg unit at iocl paradip refinery as per technical specifications mentioned in enquiry cum offer . (annexure-a), thu bearing pad,u/n:19e007ac013100a033, thu bearing pad,u/n:19e007ac013105a033, jnl bearing pad,u/n:19e007ac013110a031, adapter,u/n:e9830791-3, connector,u/n:e9830896-1, connector,u/n:e9830896-2, thrust disc lock washer,u/n:e0820503-8, thrust disc,u/n:a870256-1, gasket,p/n-ep80m1577,200 tc,elliot, lock wire,p/n-war-b1005, air breather,p/n apmb-08,200 tc,elliott, contact pin, p/n:e9830896-21, sealing plug, p/n:e9830896-23, receptacle, p/n: e9830896-6, seal ring;p/n: a837771-26, gasket, p/n:ep80m1574, air breather;p/n-apmb-12, seal ring, inboard,p/n-a837771-53, thu bearing pad,u/n:19e007ac023100a033, thu bearing pad,u/n:19e007ac023105a033, thrust disk lock washer,u/n:e0820503-4, seal ring; p/n a837771-1, seal ring p/n-a837771-38, tool eye bolt,p/n:uib-a04,46m5,elliott, tool jack screw,p/n:ustb-a03024, tool c-chnl,p/n:19e009ac017500a001, tool c-chnl,p/n:19e009ac017500a002, tool cap screw,p/n:ush-h04006, tool ay&dy ft,p/n:19e007ac029571a025, tool rtrhlg tool,p/n:19e007ac029572a015, rotor holdg tool assy,19e009ac019572a015, rotor shipping jig assy,u/n:19e007aqt1, tool rtr hlgtool,p/n:19e007ac019572a015, jack screw,u/n:ustb-a10032, rot adj tl assy,u/n:19e008aqb1, lifting hook,p/n-b879157-5, lifting hook,p/n-ft-h36115, cap screw (socket head), p/n:bsh-h12040, tool sliding hammer,p/n:e8872114-19, tool rtr lftg tool ay,p/n:b9170276-5, moment simulator,p/n:19e008aqb1r611a001, tool puller,p/n:ft-a12045, cap screw socket head,u/n:ush-h1t05018, cap screw socket head,u/n:ush-h1t04012, super bolt nut,u/n:e9850532-gr3, stud bolt,u/n:e9850543-1, dowel pin,u/n:uec1858-2, plug,u/n:plgn-e08, cap screw buttom head,u/n:u23r11, washer,p/n-p25g016, rubber gskt;p/n-e8873239-3, cap screw socket head,u/n:ush-hn04026, washer,u/n:ep25g014, stud bolt,u/n:uec1190-463, cap screw socket head,u/n:ush-hn03010, diaphragm key,u/n:e9840246s11-1, shim sbts,u/n:e9880322-gr1, shim sbts,u/n:e9880323-gr1, bolting bar,u/n:19e007ac025102a001, bolting bar,u/n:19e007ac025101a001, washer,u/n:ep25e19, shaft adapter,u/n:e9870719-1, tool sleeve wrench,p/n:e9870643-11, tool hoist ring,p/n:uhr-04,46m5,elliott, tool hoist ring,p/n:uhr-08, tool ay&dy ft,p/n:19e007ac029570a020, tool hydr-fit td,p/n:e9890091-gr1, tool hoist ring,p/n:uhr-12, tool jack screw,p/n:stb-a08050, tool jack screw,p/n:ustb-a04080, tool jack screw,p/n:ustb-a04032, tool jack screw,p/n:ustb-a03032, tool jack screw,p/n:e9851102-12, teflon sheet (fix side),p/n:e9880341-2, teflon sheet (slide side),p/n:e9880341-1, shim (fix side),p/n:e9880340-gr1,88m71,, shim (slide side),p/n:e9880339-gr1,88m71, plug, p/n:e9830907-2, rubber gasket,p/n:e8873216-1,88m71,, plug, p/n:e9830908-2,200 tc,elliott, plug,p/n:e9830906-1,200 tc,elliott, rubber gasket;p/n-e9850434-3, rubber gasket;p/n-e9850434-4, cover nut;p/n-u891906-3;model:38m9-7, spare pad assy,u/n:e9641081-31, spare pad assy,u/n:e9641082-29, spare pad assy,u/n:e9641083-33, air breather,u/n:ap16150w, air breather,p/n ap06150w,2seg-6,ebara, sealing plug,u/n:e9830896-23, contact pin,u/n:e9830896-21, plug connector,p/n:e9830896-3, receptacle,u/n:e9830896-8, plug connector,p/n:e9830896-1, receptacle,u/n:e9830896-6, shear pin,u/n:sp44t12000, shear pin coupli,p/n:1128655-7, clutch lockout,u/n:sm19846, shoulder screw,u/n:127058c-32, 3/8-16 hex locknut,flexloc (hd), i/n-14, journal brg lp,p/n:e9641081-17, oil,baffle,lp,p/n:e8646384-6, teflon seat, p/n: e8652694-2, washer plate,p/n:e8633023-2, eye bolt,p/n:ib-a08, hex nut,p/n:fn-a12, spacer,p/n:e8683431-1, cap screw,p/n:bsh-h10060, hex nut,p/n:fn-a10, screw,cap,lp,p/n-e23r123, gasket,lp,p/n:gda1-bggg016845, gasket,lp,p/n:epbom1574, gasket,lp,p/n:epbom1579, o-ring,lp,p/n:oas-rb244, o-ring,lp,p/n:oas-rb232, oil seal ring,p/n-e8642688-10, spring,lp,p/n:e8632470-18, screw cap,p/n:ft-a12050, washer lock, p/

Central Government/Public Sector

CTN :43047705

17 Dec, 2025 NA

Guna - Madhya Pradesh

Tender For name of item: rotor assembly of start-up turbine [make: tuthilll corporation/coppus turbine] in ammonia-ii plant of nfl vijaipur guna (m.p) - rotor for startup turbine of gt-pac, supply of complete rotor assembly including shaft, wheel assembly, overspeed trip assembly, keys and shaft nuts, part no.: 14-wheel assembly, 21-shaft complete, 23-shaft end nut, 113-lock washer, 319-key, 377-key shaft extension, 378-key turbine wheel & a015-overspeed trip collar assembly. rotor for start-up steam turbine of gas turbine in ammonia-ii plant, turbine serial no.: 94h9351, model and frame size: rlha28, power: 1855 hp, rpm: 3888, make: m/s tuthill corporation/ coppus turbine division, drawing no.: ca-1899-v-223.inlet steam pressure-38 bar-g, inlet steam temperature-380 degree c, exhaust-0 bar-g.

State Government

CTN :42971338

11 Dec, 2025 8.63 Lacs

Fatehpur-Raj - Rajasthan

Tender For - nh-27 to sanwara km 3/00 - excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth, providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6, providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-iv material, back filling behind abutment, wing wall and return wall in 150mm layers, with mechanical compaction, complete with all lead and lift as per drawing and technical specification as per morth specification : clause : 304 sandy material

State Government

CTN :42914992

19 Dec, 2025 28.64 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares for aph (model 27.5vitm 2000 72 degree pa) of 2x250mw unit no.10 and 11 of stps sarni. - spares for air preheater ( model 27.5 vitm 2000 720 pa ) of 2x250mw units., inboard & outboard static seals for hot end sector plates; (one set = requirement for 1 aph),, inboard & outboard static seals for cold end sector plates; (one set = requirement for 1 aph),, cold end grating (one set = requirement for 1 aph),, t-bar including t - bar pin, t- bar tab and t- bar clip for hot end, taper lock bush of o/p shaft of main drive gear box, kao wool packing, packing rope for air sealing cover assembly (guide bearing), packing rope for air sealing cover assembly (support bearing), 50 mm gun metal valve thread connection for los working pressure 5 kg/cm2, 25 mm gun metal valve thread connection for los working pressure 5 kg/cm2, rotor angle he (one set = requirement for 1 aph),, soot blower pipe along with nozzle assembly, filter for air motor 1" bsp, relief valve(die casting)22 mm for lube oil system, working pressure 5 ksc, one end is56mm & other end is 46 mm, make-corona or equivalent., lubricator for air motor 1" bsp, wash pipe assembly for hot end & cold end with ss nozzle(one set consist of 02 nos. ), steel wire rope preform, ungalvanised steel wire rope core iwrc/steel core as per is 2266/2002, tensile strenght-1770 n/mm2, length:70 meter, dia. of rope- 6 mm, construction 6x19, make-usha martin or equivalent., by pass seal bar assembly (one set consist of 1 hot end by pass seal bar -03 nos., 2 cold end by pass seal bar-03 nos.), hot intermediate end support grating plates, shoot blower warm gear box, air motor model no ir92ra014,5.51:1 make: ingersol rand or equivalent, pin rack assembly, guide bearing air seal assembly (consist of followings aluminium seal assembly (upper) -01 no. aluminum seal assembly (lower) -01 no. spring -06 nos. bolt-06 nos. nut-06 nos. locknut-06 nos. washer-18 nos. pin-02 nos. seal ring retainer-01 no., hot end sector plates including static seals on both side (along with fasteners) and tracking arrangements for inboard and outboard side for aph.one set consist of 03 nos sector plate i.e.a) sector plate fg to sab) sector plate fg to pac) sector plate sa to pa

State Government

CTN :42979241

19 Dec, 2025 9.65 Lacs

Parganas - West Bengal

Tender For civil , sanitary ,plumbing etc. maintenance of all types of repairing works of block a,b,c,d,g, l, annex building, home guard barrack, boundary wall, go-down, l.t, h.t panel room etc within unnayan bhavan, kmda salt lake, kol-91. for 12 (twelvemonth)

Central Government/Public Sector

CTN :42758496

11 Dec, 2025 15.55 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : repair and rewinding of one no 560kw,6.6kv,marathon make,vpi,pci ht motor stator of bf (b) rotor bar replacement and repair of one no 250kw,6.6kv,kec make, bmr conveyor ht motor rotor of sp for ers.

Guard Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector