Latest guide bolt Tenders | Government guide bolt Tenders

Central Government And Public Sector

CTN :45549776

15 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of aux generator foundation bolt high tensile 5/8"-11tpi x 1,3/4 with heavy duty washer od-65mm, id-16mm, thickness 6mm. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

CTN :45521875

22 Jun, 2026 NA

Kota - Rajasthan

Tender For supply cable 70 sqmm x 3 point 5 core alumunium , supply 16 sqmm x 3 point 5 core alumunium , supply 1 point 5 sqmm x 3 point 5 core copper , supply 4 sqmm x 3 point 5 core copper , supply 2 point 5 sqmm x 3 point 5 core copper , supply 25 sqmm x 3 point 5 core alumunium , supply 35 sqmm x 3 point 5 core alumunium , sitc distribution box panel flp , sitc distribution box non flp having contactor and emergency shut down buttom , sitc distribution box llight panel flp , sitc distribution box panel light non flp , sitc dol starter 5 hp , sitc dol starter 2 hp , sitc dol starter 3 hp , sitc dol starter 10 hp , sitc flp dol starter 5 hp , cable glands non flp for 70 sqmm cable , cable glands non flp for 35 sqmm cable , cable glands non flp for 25 sqmm cable , cable glands non flp for 4 sqmm cable , cable glands non flp for 2 point 5 sqmm cable , cable glands non flp for 1 point 5 sqmm cable , cable glands flp double compression for 16 sqmm cable , cable glands flp double compression for 4 sqmm cable , cable glands flp double compression for 2 point 5 sqmm cable , cable glands flp double compression for 1 point 5 sqmm cable , cable laying and and as per detailed specification of tender attachments , cable glanding , connections, terminations , excavation for cable laying , sitc of well glass led lights 90 watts flameproof complete set with drivers etc , sitc of non flp normal under roof led lights 90 watts flameproof complete set with drivers etc , rubber mats 1 m wide , earrthing strips supply and laying 50 mm x 2 point 5 mm , earrthing strips supply and laying 25 mm x 2 point 5 mm , earthing pits , sitc street light pole , sitc flp street light , sitc flp juction box for light , sitc double arm for street light , civil foundation , foundation bolt set for light pole , cable route and joint markers , sitc flp emergency light 45 w , sitc non flp emgency light , sup point earthing cable 1c x 6 sqmm , sup point earthing cable 1c x 10 sqmm , ms structure steel , supply and lay b class gi pipe for cable protection , sitc 4 way junction box , cable tray 100mm x 50mm gi supply , cable tray 50mm x 25mm gi supply , cable clamps , flp blind plug 3 by 4 inch , preparation of earthpit and cable route drawing

CTN :45280817

16 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining wall and parapet wall and side wall beside of the rolling shuttter , rcc m30 foundation and floor and roof slab and colume padestal , mild steel tmt bar for rcc work , ms tubes , shuttering plywood , anchor bolt 25mm dia , boulder soling , rolling shutter , main door , window , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system

CTN :45224280

15 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining walldrawing , rcc m30 foundation or floor or roof slab and colume padestal , mild steel tmt bar , ms tubes , shuttering plywood , anchor bolt 25mm dia and 850mm , boulder soling , rolling shutter , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system , ms plate 10 mm for roofing layer , ms plate 15 mm for roofing layer , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pbs roll is 1322 to 62 weight min 3 kgs per sqm , 75mm dia pvc pipe

CTN :45492443

19 Jun, 2026 NA

Kamrup - Assam

Tender For supply of hi mast light , led light 100watt ip 65 , hi mast power panel , nut bolt with base plate , civil work foundation making and installation chagres

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Central Government/Public Sector

CTN :45458955

15 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous rolling items consisting of shuckle,pin, screw bolt, buffer spindle, rod, round, with or w/o foundation, tie bar, flat(plane/leaf spring)angle, plte(plane/chequered), grider, chanal,bar, equilizing & compensating beams, brake-equilizer, livers, pull rod, rod runs, draw bar-hook, crow bar, fish plate, shaft,spring leaf, fork of fork lift, rail tongue, rail tensor, beam-scale, link, spaner, coupling rod, m.s. sleeper & other various types of rolling items released from loco,carriage, sig, trd, tmc, electric of sorts & sizes with or w/o attechment if any. note- 1- loading by purchaser 2- cutting not allowed 3-delivery not allowed against part payment. location-lying in bin no. a-08 near line no.-10

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

Guide Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others