Latest guide pad Tenders | Government guide pad Tenders

corporations/Associations/Others

CTN :45332934

16 Jun, 2026 65.90 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of water wall tube, od 63.5 x 5.6 mm, sa 210 gr- c , tube od 76.1mm x 7.1mm, sa 210 gr c , tube, od 54 x 4.5 mm, sa 213 t-11 , tube, od 44.5 x 4.5mm, sa 213 t-11, gr-c, ltsh upper bank , ltsh tube 44.5 x 4.5mm, sa 210 gr-c , economizer tube 31.8 x 4.5mm, sa 210 gr -a , tube, od 44.5 x 5 mm, sa 210 gr-a1 , scw offset bends left side corner bends , scw offset bends right side corner bend , 180 degree u bend for economizer od 31.8 x 4.5mm , supply tube hit-1 d63.5x5.6 , supply tube hit-2 d63.5x5.6 , u clamp for ltsh hanger tube , 90 degree bend 63x5.6 mm , 90 degree bend for fin welded panel scr1 to scr16, 63.5 x 5.2 mm sa210 gr-c , water wall bot 90 degree bend 63.5 x 5.2mm, sa210 gr-c , scallop bar for ltsh terminal tubes , fin flat 12.7x6, 2.5 to 3m is2062e250a , fin flat 76x6, l2.5m to 3m is2062e250a , fin 90x6, 2.5 to 3m is2062e250a

CTN :45513017

25 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For indexable t/c drill body dia 13.50 mm x min. lu= 211 mm, fl= 245 mm, sh. dia 25 mm x sh. length 56 mm , 2 eadge carbide insert for drill dia 13.50 mm, insert width 7.08 mm, thickness 2.0 mm, cr 0.40 mm na , carbide guide pad with double chamfer, with wide 4 mm, length 16 mm, thickness 2 mm & corner radius

CTN :45543406

29 Jun, 2026 7.00 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of coil 5 ohm , resistance coil 10 ohm , reversing key , sonometer with weight , spherometer 1 mm pitch , viscosity apparatus , youngs modulus , vernier callipers ime type , metallic sphere with hook , zener diode characteristics apparatus , pn junction diode chartersics apparatus , transistor characterstics apparatus pnp and npn , study of logic gate apparatus , friction board apparatus , thermometer 220 f , fraction weight box , plier taparia , screw driver set multipurpose , transformer step up and step down , led 2 watt , inclined plane , milli ammeter , milli voltmeter , ohms law apparatus , retort stand with clamp and bose head , helical sprinf slinky , split cork , travelling microscope , spirit level small , overflow cane , one way key , two way key , four way key , jockey , constantan wire , magnesium wire , watch glass 3 inch , watch glass 2 inch , hanger with weight 50 gm , newton colour disc , spirit lamp , tornedo working model , archmedies principle working model , hand generator working model , solenoid engine working model , electric mlotor working model , magnetic induction working model , domestic circuit parallel working model , domestic circuit series working model , battery eliminator 2 amp , magnetic compass medium size , wire cutter stripper cutter , dry cell charger , rehostat 50 ohm , rehostat 100 ohm , telescope , battery 6 volt , 9 volt dry cell , battery 12 volt , galvanometer , voltmeter , ammeter , dc copper connection wire roll insulated , nicrome wire , simple torch , laser torch red , laser torch green , laboratory stop watch 60 sec timer , white screen for image formation , plane mirror mounted on wooden block 10 x 15 cm , compass magnet small , iron filling , thread roll , geomerical instrument box , paper pin box , thumb pin box , lens cleaner fluid , multimeter digital , ebonite rod , glass rod 20 to 25 cm , test tube , test tube stand , solar system model , soldering iron , solder flux , soder wire resin 100gm , paper tape , plain stickers or label pkt , electric apparatus chart , prism refraction chart , eye defect and correction chart , inertia of 3d body , reflection of convex mirror on different position , reflection of concave mirror on different position , human eye chart , symbols of components used in circuit diagram , flaming left and right hand rule , sound wave refraction and compression , carbon resistance band reading chart , dry cell part chart , solar system chart , albert einstein portrait , prafulla chandra roy portrait , chandrasekhara venkata raman portrait , homi jehangir bhabha portrait , jagadish chandra bose portrait , dr apj abdul kalam portrait , sir issac newton portrait , ammonium chloride 500 gm chemical , copper sulphate 500 gm chemical , zinc sulphate 500 gm chemical , zinc rod , spirit solution for spirit lamp 1 ltr , first aid kit , sitting stools , cupboard or almirah shelf , lab open rack

CTN :45529725

27 Jun, 2026 27.00 Lacs

Faizabad - Uttar Pradesh

Tender For supply of ammeters different range , battery eliminator , daniell cell , drawing board , friction apparatus complete set with weight box , galvanometer , parallelogram apparatus , key one way , jockey pencil type , two-way key , laclanche cell , meter bridge , multimeter digital , multimeter manual , magnetic compass , optical bench 1 meter long , prism indian glass , potentlometer , plier , cutter , screwdriver , scissor , resistance box , dry cell 10g chargeable , dry cell charger , helical spring apparatus with weights , rheostat , resistance coil different range 1-5 ohms , resonance appratus , spherometer , screw gauge , wooden scale 1 50cm 1 100cm , stopwatch , sonometer , sprit level , thermometer , tuning fork 250hz 480hz and 512hz withpad , vernier calliper , voltmeter different range , beakers , connecting wires , charts for display blovisuals , portraits as pe choice , concave mirror , convex mirror , convex lens , concave lens , wedge knife edge for sonometer , glass slab , pendulum box , cork rubber 1.5 inches , hanger weights 500 gm , insulated copper wire , meter tape 1-100 meter , soldering iron , spring balance 0- 250 gm , u-shaped magnet , copper calorimeter , epidiascope , newton disc , telescope , camera , barometer tube , lactometer , stove oil , electric bell , proof plane , binoculars , soldering rods , pn junction diod set up , desktop set , balance physical , boyle law apparatus , portnis barometer , metallic cylinders , metal sphere , sg bottles , grave sand apparatus , young modulus , spectrometer , hydrometer , sprit level , potentiometer , silk and cat skin pieces , tuning fork , ammonium chloride , all pins 1.5 , copper sulphate , drawing pins , thread rolls

corporations/Associations/Others

CTN :45512438

26 Jun, 2026 20.60 Lacs

Sonbhadra - Uttar Pradesh

Tender For tender for straight heat shield with two nos. clamps for water wall tube dia. 63.5mm , straight heat shield with clamps for ltsh straight for tube dia. 44.5mm , heat shield with clamps for water wall screen straight tube for tube dia. 76.1mm , heat shield with clamps for s.h. screen and hanger tubes of dia. 51mm , straight heat shield with clamps for economizer tubes of dia. 32mm , straight heat shield with two nos. clamps for sh and rh tube dia 48 mm , ss rod 10mm

CTN :45498558

01 Jul, 2026 24.11 Lacs

Buxar - Bihar

Tender For tender for supply of sliding spacers and hooks - sliding spacer stopper (f) for ltsh/ 1ry sh part no. ln13600-7131-004 , sliding spacer (f) for ltsh/ 1ry sh part no. ln13600-7031-004 , sliding spacer (m) for ltsh/ 1ry sh part no. ln13600-6861-004 , male & female coupling spacer sliding hook for itsh/ 2ry sh part no. ln13600-5101-7 & ln13600-5101-8 , male & female coupling spacer sliding hook for itsh/ 2ry sh part no. ln13600-5111-7 & ln13600-5111-8 , male & female coupling spacer sliding hook for itsh/ 2ry sh part no. ln13600-5121-7 & ln13600-5121-8 , male & female coupling spacer sliding hook for itsh/ 2ry sh part no. ln13600-5131-7 & ln13600-5131-8 , male & female coupling spacer sliding hook for htsh/ 3ry sh part no. ln13600-5101-7 & ln13600-5101-8 , male & female coupling spacer sliding hook for htsh/ 3ry sh part no. ln13600-5111-7 & ln13600-5111-8 , male & female coupling spacer sliding hook for htsh/ 3ry sh part no. ln13600-5121-7 & ln13600-5121-8 , sliding spacer stopper (f) for ltrh/ 1ry rh part no. ln13600-7116-004 , sliding spacer (f) for ltrh/ 1ry rh part no. ln13600-7016-004 , sliding spacer (m) for ltrh/ 1ry rh part no. ln13600-6651-004 , male & female coupling spacer sliding hook for ltrh/ 1ry rh part no. ln13600-5113-7 & ln13600-5113-8 , male & female coupling spacer sliding hook for ltrh/ 1ry rh part no. ln13600-5103-7 & ln13600-5103-8 , male & female coupling spacer sliding hook for htrh/ 2ry rh part no. ln13600-5113-7 & ln13600-5113-8 , male & female coupling spacer sliding hook for htrh/ 2ry rh part no. ln13600-5103-7 & ln13600-5103-8 , male & female coupling spacer sliding hook for rear wall hanger tube , part no. ln13600-5112-7 & ln13600-5112-8

CTN :45331427

16 Jun, 2026 NA

Medak - Telangana

Tender For corrigendum : supply of guide pad type long drill dia: 45mm, f. l: 420mm, o. a. l: 521 of tungaloy ref. ord. no: hfo124-45oo st40- 9/s

CTN :45475070

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for physics lab in basic engineering (first year) department - purchase, joule calorimeter - copper vessel, battery eliminator 3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0 2a), voltmeter (0-5v), thermometer (alcohol), stop clock, ic regulated battery eliminator- ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometer- moving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, voltmeter- dc voltmeter; range 0 10 v, analog, ammeter- dc (0 - 2 amp), parallelogram apparatus- parallelogram law of forces apparatus fitted with stand, decade resistance box- resistance box 12 month warranty (dial type) -manganin coil- 2 dials, sonometer apparatus- sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. brass wire (5 m), travelling microscope- branded travelling microscope 0 200 mm horizontal and 0-150 mm vertical measurement, potentiometer - it features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., viscosity apparatus stokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), rheostat - high-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., deflection magnetometer apparatus - deflection magnetometer apparatus with compass box and two short bar magnets, solar cell kit- the apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0 5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kit- series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kit- battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyle s law apparatus - the apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsional pendulum - torsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulum- one meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, helical spring apparatus-- structure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom.pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6

CTN :45488099

17 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - pl no.98057054, sc. melting gr.d consisting of coach cutting of m.s.items, axle guide, a.l.bkt, l.s.box, t/floor, solebar, panel, body patch, endwall, sidewall, outer headstock, composite headstock, miscellaneous bogie fittings item, cross bar, cut pcs of pannel and channel,misc. ferrous nuts and bolts, foot step, pipe fittings, moulding, short cross member, inner wave, door collar,diagonal top plate, protection tube, handle, step hanger, cut pcs of l.s.beam and plates, ms tressle, bk. beam and dash pot spring, oxy cutting of ms seat-berth frame and miscellaneousllaneous m.s items of sorts and sizes. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

CTN :45488104

17 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - pl no.98057054, sc. melting gr.d consisting of coach cutting of m.s.items, axle guide, a.l.bkt, l.s.box, t/floor, solebar, panel, body patch, endwall, sidewall, outer headstock, composite headstock, miscellaneous bogie fittings item, cross bar, cut pcs of pannel and channel,misc. ferrous nuts and bolts, foot step, pipe fittings, moulding, short cross member, inner wave, door collar,diagonal top plate, protection tube, handle, step hanger, cut pcs of l.s.beam and plates, ms tressle, bk. beam and dash pot spring, oxy cutting of ms seat-berth frame and miscellaneousllaneous m.s items of sorts and sizes. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

Guide Pad Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others