Latest guide rail Tenders | Government guide rail Tenders

Central Government/Public Sector

CTN :45731992

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For body side sliding door to drg.no. icf/mrvc/c/bt-5-8-001,alt 'e' col.i. special condition : 1.leaves with top guide rails shall be supplied to furnishing depot (for fitment after painting of shell). 2.installation required annexure - 'a', dtd 13-09-2023 to be followed. 3. supply rate and installation rate to be quoted seperately. 4. packing drawingicf/j&t/sk-1866, alt 'nil', similar packing drg. to be used for sliding door packing. rust prevention precautions to be followed for during storage. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45708490

09 Jul, 2026 NA

Jagadhri - Haryana

Tender For supply of guide rail profile 3x19x60 length-2000 mm (for linen room sliding door arrangement) conforming to is:733-83, 63400 wp and to rcf drawing no. cc56271, alt-a/nil. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45727584

17 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of mounting bracket item no.02 & adjustable bracket item no.01(1a,1b,1c) for guide rails as perrwf drg no. 703073410040 [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45727586

17 Jul, 2026 NA

Bangalore - Karnataka

Tender For linear motion (lm) guideways for x axis of new scrap wheel cutting machine to model no.shs45 of thk or exactly equivalent in hiwin , ina (schaeffler),rotolinear or nsk. specifications: rail length :2050mm; mounting hole pitch (p) : 105 mm ; g dimension : 35 mm. note: (a) the above rails are used in combination. hence, the butting ends shall be properly ground and finished, perpendicularity to be maintained for all the rails; (b) the lm guide rail shall be fully compatible with the lm block model shs45c of thk make. (c)only oems or their authorized dealers shall quote. a valid authorized dealership certificate (adc) must be submitted along with the offer. (d) a sample of one number of lm guide to be supplied for approval prior to dispatch of the entire po qty. (e) warranty certificate to be furnished along with the supply for a period of 18 months from the date of supply or 12 months from the date of fitment. (f)non-compliance with any of the above conditions will lead to rejection of the offer. [ warranty period: 18 months after the dateof delivery ] ]

CTN :45602566

06 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : set of lm guide rails with runner blocks of x-axis for hmt smc-14, smc-15 & smc-16 machines. one set

CTN :45704128

17 Jul, 2026 2.83 Lacs

Lucknow - Uttar Pradesh

Tender For supply of steel raw material for mold work b b - cavity and core plate 750x450x67 , cavity and core plate 250x200x32 , slider1 450x300x75 , slider2 250x100x75 , slider3 150x150x75 , locking heal1 450x100x75 , locking heal2 250x75x75 , locking heal3 150x100x100 , guide strip 150x30x30 , ejector plates 750x300x20 , ejector plates 250x100x16 , spacer 750x110x75 , spacer 250x45x85 , top and bottom mounting plate 750x550x40 , top and bottom mounting plate 250x250x25 , core back plate 750x450x36 , core back plate 250x200x25 , cylinder holding plate 200x150x25 , guide rail1 450x50x50 , guide rail 2 and 3 250x50x50 , round bar dia 180x32

Central Government / Public Sector

CTN :45702506

06 Jul, 2026 NA

Multi City - Telangana

Tender For auction sale of rolling stock - coaches -scrap cond. under aged/over aged bg 8 wheeler icf/rcf coaches 15 nos without wheel sets cum trolley and r.c items .coach nos. 1] 021014 accn rcf sc scr, 2] 997328 gs scr, 3] 047404 gs sc scr, 4] 047409 wgs sc scr, 5] 037230 wgscn sc scr, 6] 997241 wgscn scr, 7] 031108 wgaccn sc scr, 8] 997636 wgscz scr, 9] 994133 wgscn scr, 10] 997431 gs scr, 11] 047028 wgfcwc sc scr, 12] 97494 gs rcf, 13] 96271 cn rcf, 14] 047609 wgscz sc scr, 15] 007217 gs scr. ds-8 nos 013328-26-00291, 00302, 00297, 00296, 00294, 00293, 00292, 00298, 00290, 00299, 00295, 00289, 00288, 00300, 00301 dt.16.04.2026. total weight of 15 coaches. 365.13998 mt approx. [fe-312.29458 mt approx, aluminium-6.7312 mt approx., stainless steel -20.5732 mt approx, copper- 0.041 mt approx, decolumns, compreg sheet, wool and limpet, berths seats and rexene -25.5 mt approx]. loc. lying on the ground 13 coaches at kzj yard and 02 coaches on track at sick line kzj. note- [1] free delivery period of 80 days is approved by cmm/t vide note no.6 dt.2/06/2026 in e-file no.559446. 2] the purchaser is instructed to remove all debris arising from cutting of the lot purchased, from the cutting/loading spot and keep the delivery spot neat and clean before the final lorry delivery, failing which, the final lorry will be stopped. 3] the purchaser is strictly instructed to stack all the rc items at one location well away from the cut-up parts of the coaches and the custodian is advised to lift the same on the day of delivery affected. [before affecting/commencing/starting of the delivery itself]. 4] the purchaser is responsible for providing adequate safety firefighting equipment on the spot at the time of cutting and delivery. the purchaser shall be liable to make good any damage/loss caused to railway property during cutting or delivery. 5] railways are not responsible for any shortage. 6] any reclaimable items found in excess to the below, at the time of cutting and delivery of coaches should be returned to railways. 7] berths available in coaches are also part of the lot. 8] it is a advised that all witnessing officials has to sign the noc at the time of closing delivery order. 9] any concealed cables and items found at the time of gas cutting the same should be returned to railways.10] while loading the material cut up parts has to shift crossing two dead line tracks.11] bronze wearing pieces of all the 13 coaches which are grounded were removed and kept in the custody of custodian. in two coaches 047609 wgsz sc and 007217 gs scr they are in intact which can be seen after coach cutting.12] 13 nos coaches rc items are removed as per l no. cb and uf/stores/18ma dt.22.12.2025 and 24.12.2025. 13] sse cnw kzj to take care the rc items while cutting the coaches by the firm not to damage. 14] while loading material cutup parts has to shift crossing two dead line tracks.15] cutting is permitted. delivery by number basis pl no. 98111061. hsn code 72042910. available under sse cnw kzj, state tg.

Central Government/Public Sector

CTN :45587484

03 Jul, 2026 NA

Bardhaman - West Bengal

Tender For corrigendum : mat code 263193102: guide rail

CTN :45678883

04 Jul, 2026 2.10 Lacs

Kalpakkam - Tamil Nadu

Tender For supply of toroidal transformer for high voltage card of sodium aerosol electronics , toroidal transformer for power supply sodium aerosol electronics , toroidal transformer for power supply of mutual inductance type level probe electronics , toroidal transformer for power supply of mutual inductance type leak detector electronics , guide rail for inserting pcb plug-in modules guide rail , pran electronics key switch with 7mm dia black knob

CTN :45327260

07 Jul, 2026 4.36 Crore

Thiruvananthapuram - Kerala

Tender For corrigendum : dismantling, supply, installation, testing, and commissioning of 5 nos. passenger lifts and 5 nos. goods lifts in it buildings at technopark phase i campus, trivandrum - dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lifts for nila building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1360 kg, rated speed 2.0 m/s, serving g+7 floors with 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, dcs control, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 680 kg, rated speed 1.5 m/s, serving g+3 floors with 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, fireman operation, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lift, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for gayatri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1500 kg, rated speed 1.0 m/s, serving 4 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for bhavani building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 2500 kg, rated speed 1.0 m/s, serving 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1000 kg, rated speed 1.0 m/s, serving 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, s

Guide Rail Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector