Latest guide vanes Tenders | Government guide vanes Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Corporations And Associations And Others

CTN :45563054

07 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for civil contract jobs - civil contract job:, earth filling under floors with surplus ordinary soil or soil containing gravel or kankar, including ramming, watering and consolidated lead., first class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth, laying 80 mm thick factory made cement conc. inter locking paver bricks after m-40 grade made by block making machine with string vibratory compaction ordinary gray color & pattern over 50 mm thick compacted bed of coarse sand filling the joint with fine sand, complete in all respect ., dismantling brick of flagged stone flooring including concrete base, dismantling concrete plain 1:2:4 mix, cement concrete 1:2:4 with stone ballast or shingle, a. mixing by manual mean, b. mixing by mechanically mean using concrete mixer, laying of dry brick ballast 40mm gauge for flooring, civil work (rate to quoted on csr rates)

Central Government And Public Sector

CTN :45693112

16 Jul, 2026 1.13 Crore

Kullu - Himachal Pradesh

Tender For repair along with hp-hvof coating of 02 set damaged guide vanes of 130 mw francis turbine at parbati-iii power station

State Government

CTN :45655842

26 Jun, 2026 NA

Barasat - West Bengal

Tender For invitation of item rate quotation for mgnrega works under north 24 parganas district for secure soft rate fixation purpose . - invitation of item rate quotation for mgnrega works under north 24 parganas district for secure soft rate fixation purpose ., first class bricks, first class picked jhama bricks, jhama bats, brick bats (1st class), river sand(local)/silver, coarse sand, medium sand, rubbish, supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 10 cm. dia ., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 12.5 cm. dia., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 15 cm dia., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 17.5 cm dia., supplying, dressing and stacking at site bamboo pins above 5.00 cm dia. and up to 7.5cm dia., empty cement polythene bags in good condition, hume pipe np-2(r.c.c. spun pipe) 300 mm dia, hume pipe np-2(r.c.c. spun pipe) 450 mm dia, hume pipe np-2(r.c.c. spun pipe) 600 mm dia, hume pipe np-2(r.c.c. spun pipe) 700 mm dia, hume pipe np-2(r.c.c. spun pipe)900 mm dia, coller of pipe 300m dia, coller of pipe 450 m dia, coller of pipe 600 mm dia, coller of pipe 700 mm dia, coller of pipe 900 mm dia, hume pipe np-3 (spigot) 450 m dia, hume pipe np-3 (spigot) 600 mm dia, hume pipe np-3 (spigot) 900 mm dia, hire charges of roller, cement, tor steel rods/hysd/fe415/fe500/fe 500 d, tor steel rods/hysd/fe415/fe500/fe 500 d, fine sand, salbullah ( avg 10cm dia), sal bullah (avg 12.5cm dia), sal bullah (avg 15 cm dia), sal bullah (avg 17.5 cm dia), nail, stone screening type a (13.2 mm), stone screening type b (11.2mm), 1st class kiln burnt brick (traditional), supply of thermocol 12.5 mm thick, polythene sheet (150 gm per sqm), stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, g i wire, hire charges of mixture machine, hire charges of vibrator (needle type 40mm), display board for community, display board for ibs, jute rope, coconut rope, poly rope, lime dust, spade/shovel, wire, mugs, buckets, 25mm to 30mm shuttering without staging in foundation, loading & unloading & stacking sand/stone aggregates (less than 40mm nominal size), loading & unloading & stacking sand/stone aggregates (above than 40mm nominal size), loading & unloading & stackinglime ,moorum,building rubish and similarmiscellaneous material

State Government

CTN :45641709

29 Jun, 2026 4.99 Lacs

Jaipur - Rajasthan

Tender For supply of various ornammental items at designer kitchen of rajbhawan jaipur - supply of heritage look cast iron vertical column to support the shade structure. the complete column must be in cast iron with internal steel pipe of od76mm in 4mm thickness going through for strength. the pillar consists of bottom base of height 1170mm having base plate diameter 360mm with a spiral part of height 470mm and crown shape model on top of height 250mm. making overall height 2450mm. overall weight not less than 140 kgs. all the parts are grinded, primered and designed as per approved sample by engineer incharge, supply of ornamental cast iron spandrel (l-bracket) having length 460mm & height 400mm suitable to the coloumn pillars. all the parts are grinded, primered. all the designs & sample will be approved by engineer-in-charge, supply of the frieze (top panel) having the dimensions 320mmx210mm is mounted on steel pipe frame of size 40mmx25mm and all welding joints and gaps grinded and filled properly for smooth surface finish. all the parts are grinded, primered and approved by engineer in charge (length 7.50 feet = 1 frieze.., supply of floral design ms sheets in 3mm thickness. the design is cut out on fiber laser cutting machine using laser beam. the sheet is then properly grinded to give smooth surface finish. 6mm holes along with countering must be provided at every 2ft gapin the sheet for installation purpose., 81.5 x 5 , 81.5 x 4.5 , 80 x 5 , 96 x 5 , 95 x 5 , supply of traditional clay oven made of natural clay mixed with sand, hay and cow dung with smooth exterior in barrel or roundedcylinder shape. size 31" height & 25 " dia., supply of fire brick stone of size 600mmx300mm x75mm used for furnace lining, cement & lime kilns etc. it should have heal resistance > 1300 c & weight 25 kg to40 kg., supply of single groove roofing tile of clay material kelu of size 15"x9" thickness 15- 18mm & weight per kelu approx 2100 kg, colour red/brown/orange as per required by raj bhawan authority & approval by engineercharge, supply of land scaping colourfull natureal stone different colout red blue black white. as per requirement of site 5 to 15 mm in roudn oval shape and whitout sythetic coating

Central Government And Public Sector

CTN :45341944

29 Jun, 2026 1.28 Crore

Chamba - Himachal Pradesh

Tender For corrigendum : hp hvof coating of 02 set guide vanes 20 nos in each set of 3x100 mw capacity francis hydro turbines of chamera ii power station

CTN :45596927

08 Jul, 2026 NA

Jhakri - Himachal Pradesh

Tender For providing of custom bid for services - repair of 76 no of eroded guide vanes dismantled during annual maintenance of year 2025-26 of 6 x 250mw njhps at jhakri

CTN :45566274

08 Jul, 2026 13.49 Lacs

Jhakri - Himachal Pradesh

Tender For tender for du bushes for guide vanes of francis turbine as per ts, qap & drawing enclosed at annexure-b

Central Government And Public Sector

CTN :45535371

03 Jul, 2026 56.41 Lacs

Dharchula - Uttarakhand

Tender For repair and hp-hvof coating of 02 sets (40 nos.) of guide vanes (wicket gates) of 70 mw francis turbine of dhauliganga power station for fy 2026-27.

Central Government/Public Sector

CTN :45354315

15 Jun, 2026 10.80 Lacs

Wani - Maharashtra

Tender For corrigendum : supply of rotating assy for rkb,4 stage part no. ra150x34k , diffuser with guide vanes part no. 129 , enclosed impeller part no.151 , shaft sleeve s side part no. rkb15034k310 , shaft sleeve d side part no. rkb15034k311 , wear ring suc side part no. rkb15034k190 , wear ring del side part no. rkb15034k191 , suction casing part no. 113 , delivery casing part no. 111 , cooling chamber part no. 252 , bearing housing nde part no. 2401 , compression spring part no. 483 , thrust bearing adaptor part no. 272ms , bearing cartridge nde part no. bcrkb150x34

Guide Vanes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors