Latest guide wall Tenders | Government guide wall Tenders

CTN :45443050

16 Jun, 2026 12.99 Lacs

Gurdaspur - Punjab

Tender For corrigendum : special third-party techno-financial audit for the below mentioned ongoing work of mitigation of flood to be occurred in future due to breach which took place on left bank of river ravi during flood of 2025 by constructing retaining wall in a le - special third-party techno-financial audit for the below mentioned ongoing work of mitigation of flood to be occurred in future due to breach which took place on left bank of river ravi during flood of 2025 by constructing retaining wall in a length of 350 mtr. in the breached portion of left bank and bank protection in a length 235 mtr. this work includes 2 no sub works i.e 1) construction of retaining wall/guide wall on left side of river ravi (part-1) 2) construction of retaining wall/guide wall on left side of river ravi near power house no 2 (part 2 including zone -3 bank protection )

Central Government/Public Sector

CTN :45120078

18 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of coke guide wall assembly cosist doors(rh&lh; pd- co-784; material: 2004933

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

State Government

CTN :45497581

20 Jun, 2026 2.17 Lacs

Kharagpur - West Bengal

Tender For :construction of brick masonry guard wall & earth, sand filling in c.c. road portion in front urban health & wellness centre at ward no-04 under kharagpur municipality

State Government

CTN :45476589

15 Jun, 2026 3.96 Lacs

Multi City - Telangana

Tender For repairs and reconstruction of right side and left side guide wall of oora chereuvu balgera(v) ghattu (mandal) jogulamba gadwal (district).

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

State Government

CTN :45381360

10 Jun, 2026 41.31 Lacs

Ananthapur - Andhra Pradesh

Tender For corrigendum : arresting the leakages for abutments and wing walls and rising of guide walls of ut @ km 84.811 of rbllc

State Government

CTN :45459057

15 Jun, 2026 NA

Pithoragarh - Uttarakhand

Tender For construction of rcc checkdam guide walls supply and fixing hdpe pipe wire crates

State Government

CTN :45439425

15 Jun, 2026 NA

Jamnagar - Gujarat

Tender For unit rates of composite items forrecharge scheme for defunct privatetube wells/wells for groundwaterrecharge in jamnagar dist. underpanchayat irrigation division,jamnagar for the year 2025-26. (six attempt) - jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting t

CTN :45428422

10 Jun, 2026 NA

Malihabad - Uttar Pradesh

Tender For supply of horticultural products and horticultural works- mango kernels, guava seeds, aonla (indian gooseberry) seeds, bael (wood apple) seeds, karonda seeds, custard apple seeds, ber (jujube) seeds, drumstick (sahjan) seeds, jackfruit seeds, lemon seeds, jamun (black plum) seeds, polythene sheets (white/black, 200 gauge), neem cake, vermicompost, fertile farm soil, sand, sutli (jute twine), charra (grafting tape/strip), polythene caps, moss grass, ornamental seasonal plants, cocopeat, earthen pots, 08-inch, 10-inch, 12-inch, lime, copper sulphate (tutia), horticultural and other tasks, task of removing grafted plants (kept in polythene bags in nursery beds), labeling them, and transporting them to the sales center, task of loading grafted and seedling-grown plants onto trucks for sale, preparing scions and performing grafting (cleft method) on mango, guava, aonla, bael, etc., hoeing/weeding around plants using a pickaxe/shovel and loosening the soil, preparing a mixture of soil, sand, and cow dung manure and filling polythene bags (size: 12.5 × 17.5 cm), preparing a mixture of soil, sand, and cow dung manure and filling polythene bags (size: 15.0 × 22.5 cm), preparing a mixture of soil, sand, and cow dung manure and filling polythene bags (size: 10.0 × 15.0 cm), digging up seedling plants, potting them in polythene bags, and shifting them to another nursery bed, budding operations on aonla, bael, and guava, whitewashing the trunks of mother plants with a lime and copper sulphate mixture up to a height of one meter, 1. mango, litchi, aonla, etc., 2. guava, lemon, ber, etc. orchard ploughing using a tractor-mounted harrow cultivator, clearing of unpaved roads and removal of bushes/scrub, creating tree basins and performing weeding and soil loosening for mango, litchi, amla, jackfruit, and guava trees in the orchard, transplanting seedlings from seedbeds into polythene bags, maintenance of bagged saplings, including irrigation, weeding, and application of pesticides and nutrients, tractor-based ploughing using a rotavator, land leveling using a tractor, land leveling and excavation work using a jcb machine, constructing ridges (bunds) one foot wide and one foot high in various plots, repairing irrigation channels/drains in various plots, installation of pvc panels/false ceilings (inclusive of materials, labor, and transportation charges), brick masonry work in the government orchard/office, 1- interior plastering work in the government orchard/office, 2- exterior plastering work, painting and whitewashing of buildings and boundary walls in the government orchard, 1- whitewashing with lime (inclusive of materials), 2- painting with distemper (inclusive of materials), 3- painting with enamel paint (inclusive of materials), 4- application of wall putty

Guide Wall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government

State Government