Latest gusset Tenders | Government gusset Tenders

Central Government/Public Sector

CTN :45731254

09 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of lifting tackle for bg locomotive wheel set assembly with bull gear, as per rdso drg. no. skdl- 4511 alt-1 or latest. set consisting of (1) base plate, qty- 01 no. (2) gusset plate, qty- 04 nos. (3) ms flat (30 x 10 mm thick), qty- 02 nos. (4) strengthening plate, qty- 02 nos. each set consists of 04 items 09 nos only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45710554

08 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For x/6620/2026/0341b/1 cutting of plates - gusset plate1, gusset plate2, gusset plate3, gusset plate4, gusset plate5, gusset plate6, gusset plate7, gusset plate8, gusset plate9, gusset plate10, gusset plate11, gusset plate12, short support plate1, short support plate2, long support plate1, long support plate2, short support plate3, short support plate4, long support plate3, long support plate4, support1, support2, plate, end plate1, end plate2

CTN :45743720

09 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bolster bottom gusset. drawing no : wd - 90030 - s - 55, alt. 6, item no. 6. [ warranty period: 30 months after the date of delivery ] note: supplier should drill 4 holes for 22mm dia rivets onbolster bottom gusset (location of holes as mentioned in drawing) and supply accordingly. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733165

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.

CTN :45399907

06 Jul, 2026 27.98 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of hydraulic spares of side arm chargers and wagon tipplers at chp, sstps, suratgarh - d.c.valve:4we6d6x/eg24n9k4 with solenoid &connecter or equivalent, d.c.valve:4we6y6x/eg24n9z4 with solenoid &connecter or, equivalent, hose pipe dko12s l=1200mm one side 90 bend, fittingstraight, connector : 12sr x ½" port connection size : g 3/8", hose pipe dko 38 sx 1000 mm, r13 with end fittings, hose pipe dko 12s x500mm,, one side 90 deg. with end, fittings, hose pipe dko 12sx 900mm,, one side 90 deg. with end, fittings, hose pipe dko 12s l=900mm, one side 90 deg. bend with,, fitting- straight connector : 25, sr x 1" port connection size, :19 dia, hose for sac :, hose pipe dko 12s l=500mm, one side 90 deg. bend with end, fittings, hyd. hose din 20022/en 853-2sn dn 40 i.d. 1.1/2'' w.p. 90, bar/1300 psi exceeds sae 100, r2 at l-6 mtr., hyd. hose sae 100 r1 at-10- i.d. - 5/8" l-6 mtr. working, pressure 350 bar/5100 psi, hyd. hose din 20022/en 853-2sn dn 20 i.d. 3/4'' w.p. 215, bar/3100 psi exceeds sae 100 r2 at l-1.6 mtr., hyd. hose din 20022/en 853-2sn dn 8 i.d. 5/16'' w.p. 350, bar/5100 psi exceeds sae 100 r2 at l-1.6 mtr., sae 100 r13-20 or eq. id 1-1/4'' with std end assy. on one, end m52x2 fs'o' ring type straight and other end with, m52x2 fs'o' ring type 90 degree swept elbow suitable, for 345 bar working pressue l-1.5 mtr., sae 100 r1a-10 or eq. id 16 mm with std end assy. on, both ends having stand pipe of 18mm od x 30 mm long, suitable for working pressure 130 bar l-1.5 mtr., sae 100 r13-12 or eq. id 19 mm with std end assy. on, one end m36x2 fs'o' ring type straight and other end, with m36x2 fs'o' ring type 90 degree swept elbow, suitable for 345 bar w.p. l-1.5 mtr, sae 100 r1a-06 or eq. id 10 mm with std end assy. on, both ends having stand pipe of 12 mm od x 30 mm long, suitable for w.p. 180 bar l-1.5 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 3100 psi/215 bar (21.5 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 420 bar (42 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn id-5/16'' (7.9 mm) w.p. 5100, psi/350 bar (35 mpa) sae 100 r2 at length = 1 mtr, d.c. valve :4we6j 6x/e g24 n9z4 with solenoid & connector, or equivalent, check valve :z2s6-1-6x or equivalent, dbl. throttle/check vlv:z2fs 6-2-4x/2qv or equivalent, d.c. valve :4we6d 6x/e g24 n9z4 with solenoid & connector, or equivalent, filter element: 0030d010bn4hc, filter element: 0160d010bn4hc, filter element: 0330r010p, cylinder for charger uncouple 40x20x220 mm, cylinder for arm delatching 40x20x60 mm, complete seal kit consisting of piston seal, rod seal, wiper seal,, o-ring, back-up ring 140 mm dia bore x 80 mm dia piston rod x, 1400 mm stroke hydraulic cylinder(type 0627658), return line filter element type- cfr-250-12-10, manifold block: c-sk-2639-a1 or equivalent, return line filter element type- cfr-630-20-25-g, throttle cum check valve drv7-16-532-00 or equivalent, relief valve : r4v06-001-10a1 or equivalent, pilot operated check valve: c4v06-0g3-4b1 or equivalent, throttle valve dv7-16-532-00 or equivalent, dc valve part no. 4we6d or equivalent, shut off valve part no. khbg-1/4''-1-1-1-2 or equivalent, d.c. valve 4we6j with solenoid coil (double)and connector or, equivalent, pressure control pilot: mcv116g4201 or equivalent, pressure switch ips-14-100 or equivalent, shuttle valve sl06-s10 or equivalent, double throttle cum check valve zrd-05-ab-0 or equivalent, relief valve part no.r4v06-561-10a1 or equivalent, relief valve part no. r4v03-591-10a1 or equivalent, check valve part no.c4v06-560-4b1 or equivalent, shuttle valve part no. sl-06-t02-10 or equivalent, inline throttle check valve part no.drv-6 or equivalent, throttle/check valve part no.-z-2f-s6-30 or equivalent, dc valve :3d02-34-207-03-02-00a1-07-07327 or equivalent, dc valve: 3d06-35-b01-03-03-24b1-07538 or equivalent, relief valve : ng6-50 bar or equivalent, suction strainer: sc2-100 or eq

Central Government/Public Sector

CTN :45710527

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy-sheet of foot plate, gangway bridge, fall plates, gusset plate and heavy sheet (mixed material)of sorts and sizes with or w/o attachments us and ur. loc- lying at bin no. c-46 in scrap yard judw. remarks-(1)loading by purchaser. (2)private road crane allowed for loading purpose only. note- ferritic steel will be taken back if found in lot at the time of delivery.

State Government

CTN :45705895

30 Jun, 2026 NA

Pinjore - Haryana

Tender For cement plaster (in fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) ,steel door/ window frames and shutters providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. using m.s. angels 40x40x6 mm for diagonal braces, sigle/built-up steel/tubular sections steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level a,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand)

State Government

CTN :45694285

06 Jul, 2026 80.98 Lacs

Umaria - Madhya Pradesh

Tender For procurement of critical spares of tg set for aoh of unit no. 3 and 4, at sgtps, mppgcl, birsinghpur. - hp shaft sealing front as per tender schedule, sealing ring, sealing ring, sealing ring, hp shaft sealing rear as per tender schedule, sealing ring, sealing ring, sealing ring, ip shaft sealing rear as per tender schedule, sealing ring, ip shaft sealing front as per tender schedule, sealing ring, lpc front shaft sealing as per tender schedule, sealing ring, sealing ring, lpc rear shaft sealing as per tender schedule, sealing ring, sealing ring, bearing yoke keys, fitted key for brg. no. 1 yoke bottom, fitted key for brg. no. 1 yoke side, fitted key for brg. no. 2 yoke bottom, fitted key for brg. no. 3 yoke bottom, fitted key for brg. no. 3 yoke side, fitted key for brg. no. 4/5 yoke bottom, fitted key for brg. no. 4/5 yoke side, radial and axial keys as per tender schedule, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key ( hp rear brg pedestals), fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key l -196 (radial gusset block in condenser), key l-78, fitted key ip inlet insert as per tender schedule, fitted key ip inlet insert as per tender schedule, fitted key ip extraction connection, fitted key ip casing assembly, key ip casing assembly, fitted key (hp seal), fitted key for hp casing (radial), fitted key for hp casing (axial), brass sealing strip 8x2x845, brass sealing strip roll 8x2, stud m24 x 250 for ms/hrh strainer with hex nut & washer, coupling bolts m56 x270 for hp/ip, coupling bolt m64x335 for ip-lp, clamping piece for lp turbine, locking plate 7th stage for lp turbine, locking plate 8th stage for lp turbine, helical compression spring, fasteners, stud m52 x 220- 20 x185 modified, stud am64 x 305- 20x248, stud am 72x06x320 25x257, stud am 72x06x520 25x308, stud am 72x06x380 25x252, cap nut m52 for hp inner casing, cap nut pm 64, cap nut pm72 x 6, screw hex m 36x180, screw hex m 30x110, mop spares, bearing bush, bush, mop impeller ring dia 185, governor impeller ring dia 106, o ring, shaft check nut 30x1.5, sealing ring, .

Central Government/Public Sector

CTN :45702729

10 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of others - condemned, released & un-serviceable x frame angles gusset plate and rivets.-33.496mts.[ total-33.496mts] location-available at in front of sse/bri/mdu office. not for sale:-nil. note-[1] delivery to be made on ¿as is where is and actual weighment basis only.[2] in all cases, i.e. poclain/jcb//crane loading/ manual loading, the purchaser (by engaging his own labourers). cuttings are permitted to loadable sizes and hand over the non-ferrous (if any) and excess quantity to the custodian,[3]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian as nfs. s1539. udm lot no.089217-26-00053 dt.09.05.26 hsn code no. 72044900.

Central Government/Public Sector

CTN :45679123

15 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of osaero job work for manufacturing of 199 parts as a package reference semfg 1069 - gusset, gusset, gusset, gusset, gusset, gusset, gasket, groove, gasket, gusset, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, gasket, gasket, gasket, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, frame, frame, frame, frame, frame, frame, frame, frame, frame, frame, frame, gasket, gasket, gasket, gasket, gasket, gasket, frame, frame, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, fillet, fillet, fillet, fairing, fairing, fillet, fillet, fillet, fillet, fillet, elbow, elbow, elbow, elbow, gasket, gasket, frame, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, elbow, knee, elbow, elbow, bracket, external web, frame 24, elbow, elbow, gusset, gusset, gusset, gusset, gusset, gusset, gusset, gusset, gusset, gusset, gusset, gusset, flange, flange, flange, flange, gusset, fairing, fairing, gusset, gusset, gusset, gusset, elbow, elbow, grid, grid, flange, semi-branch pipe, bracket, elbow, elbow, elbow, flange, flange, gasket, diaphragm of frame no.21, diaphragm of frame no.21, diaphragm of frame no.22, diaphragm of frame 22, bottom flange of frame no.24, floor

Gusset Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector