Latest guy grip Tenders | Government guy grip Tenders

Central Government/Public Sector

CTN :40538284

23 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of hex head screw-m16x200x44 thd (rolled thread)(zinc plated) is 1364, propertycla ss 10.9, is 1367 part-iii, is 1367 part -ii grade a, is 1367 part-17. clw specn no. clw/ms/3/201 alt- 2 & clw specn no. clw/ms/3/49 alt 4 clause no. 11 makes are (a) unbrako (precision fasteners), (b) g. k.w. , (c) laxmi precision, (d) sundram fastners (tvs) & item no. 45 of clw drg. no.1209.01.111.004 alt-4. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538150

16 Jun, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of circuit breaker battery charger input. drg. no /spec.- (a) power circuit breaker-qx3-ah 8569-20a, abb id no.-hbtb585552 r3043. (b) aux. contact- qhk ss, abb id no. hbtb585557 r1200. rating-20a- 690v ac-3 poling. clw spec. no. clw/es/3/0037/h with latest alteration & clw/es/3/009 6/l with latest alteration. (schneider electric item type ref. a) ng125h3p2oac-18725 (b) 19071) [ w arranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40229391

09 Jun, 2025 7.25 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For corrigendum : supply of spares of primary cooling pumps for power house - pump shaft, ss 316, item no. 049 , bearing housing, cl, item no. 008 , key for coupling, item no. 054 , water deflector, item no. 729 , coupling set with spacer and rubber glands (including pins, bushes and washers) , shaft sleeve, ss410 , circlip for bearing , logging ring, gfn item no.044 , lip seal rubber item no.584

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40540256

20 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of cs ss fittings - item no.1 material code_12015227 , item no.2 material code_12015231 , item no.3 material code_12015233 , item no.4 material code_12015250 , item no.5 material code_18635787 , item no.6 material code_18635791 , item no.7 material code_18635794 , item no.8 material code_18635788 , item no.9 material code_18637145 , item no.10 material code_18637146 , item no.11 material code_18637147 , item no.12 material code_18637131 , item no.13 material code_18648278 , item no.14 material code_18648279 , item no.15 material code_18648280 , item no.16 material code_18637552 , item no.17 material code_12015169 , item no.18 material code_12015157 , item no.19 material code_12015158 , item no.20 material code_12015159 , item no.21 material code_12015160 , item no.22 material code_12015161 , item no.23 material code_12015162 , item no.24 material code_12015164 , item no.25 material code_18648270 , item no.26 material code_18648225 , item no.27 material code_18648277 , item no.28 material code_18637148 , item no.29 material code_18637149 , item no.30 material code_18637603 , item no.31 material code_12015193 , item no.32 material code_12015194 , item no.33 material code_12015182

Central Government/Public Sector

CTN :40538080

23 Jun, 2025 NA

Erode - Tamil Nadu

Tender For s.s. hinges for 3 phase loco main door as per drg no. 1209-09-433-069 alt- 02. note: 1. one sample to be got approved before effecting bulk supply. 2.note: supply by sources as per clw item id: 2100830 in ireps vendor directory. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529951

28 Jun, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of ss hex head screw size 12x60 mm with nyloc nut & plain washer. drawing : drg no lp 63138 _alt c , item no. 4, 5 & 6 or drg no cc63136 _alt f , item no. 4, 5 & 6. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40539594

16 Jun, 2025 NA

Delhi - Delhi

Tender For supply of utensil set ( induction base tawa-01 dia-27.5 cm, induction base sauce pan-01 cap.-02 ltr., induction b ase fry pan-1 dia-24 cm, induction base karahi-01 cap-05 ltr., induction base degchi (patila) ss with cover-04 cap-3lt r,4ltr.,5ltr,6ltr.).make-all-clad, milton, hawkins, cello, vinod or similar reputed make.tenderer's are required to indica te the make, model, design, and color for the subject item. an item catalogue must be attached to your offer, failing which the offer may be ignored. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529731

09 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of crf trough floor part to drg.no. icf/mrvc/c/bt-1-3-003 alt ' a 'item-1= 3 nos and item-2= 1 no. icf/mrvc/c/ss-1-3-003 alt ' c 'item-1= 6 nos and item-2= 2 n os. the packing frames / structures are to be taken back by the supplier from icf after t he components are taken for production. special condition : packing as per icf/j&t/sk/1729, alt "b". [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40530005

05 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of ss pipe size: 33.40 od x 2.77t x 85 mm thereaded both sides to drg no lscn/eog-6-3-005, item-10, alt-d and specn. astm a312/a312m,gr.tp304. [ warranty period: 30 months after the date of delivery ]

Guy Grip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors