Latest guy rod Tenders | Government guy rod Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Trust

CTN :45679919

29 Jun, 2026 NA

Katra - Jammu And Kashmir

Tender For supply of miscellaneous electric items - steel tubular 9 mtr. long pole (st-410 sp33) , acsr weasel conductor 6/1/2.59 mm , 11 kv go, ab switch 3-phase, 3-pole, 200 amp vertical type with rod heavy duty , back clamp for 9 mtr. pole with fitting , 11 kv horn gap fuse set (hg set) 3-phase 400 amp polymer type heavy duty , la set station type (gapless surge arrestor, 9kv, 10 ka, la with polymer housing station type heavy duty) , xlpe pvc cable single core 300 mm sqr. (300 sq mm cable 1.1 kv grade, pvc insulated standard conductor frls type) , 11 kv polymeric pin insulator 12 kv, 5 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm , insulator disk 11 kv (11kv polymeric composite discs insulator with pin and gl fittings, 12 kv, mainfalling load 45 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm) , channel 100.00 mm x 50.00 mm x 5.00 mm (10 feet long) , nut bolt full thread with washer 4"/6" heavy duty , wedge connection / pg clamps , danger plate and clamps , g.i. bracket wire for anti climbing , 3 phase 4 wire trivector meter with ct/pt unit , aluminium thimble 185 mm , lv distribution box for 400 kva dtr with mccb for incomer & sfu's for outgoing circuits , stay set (gi rod with clamp) - galvanised stay set with 50x8mm stay clamp, gav. insulator (02 nos.) anchor plate (200x200x6mm) nut-bolt 2 nos. turn-buckles, 1.8 m long 16 mm diameter solid g5 stay rod & 7/3. 15 mm dia gi standard wire complete , g.i. guy rod complete with clamp and insulator , anti climbing device with clamp , guy / stay wire 7/14, galvanized steel, typically hot-dip zinc-coated for corrosion resistance , giv cross-arm with top bracket and gi channel-arm including clamp (gi v cross arm with top bracket including clamp and gl channel x-arm including clamps and braces) , channel 75 x 75 x 6mm (10 feet long) , g.i. earthing wire 8/10 mm

Trust

CTN :45645403

26 Jun, 2026 NA

Katra - Jammu And Kashmir

Tender For quotation for supply of miscellaneous electric items - 11 kv polymeric composite pin insulator , kv, 5kn, lighting impulse 75 kv positive and 80 kv negative creepage distance 320 mm ,11 kv polymeric composite disc insulator with gi fittings, 12 kv, main falling load 45 kn, lighting impulse 75 kv positive and 80 kv negative creepage distance 320 mm , gi guy rod complete with clamp and insulator 01 no , iron channel 75 x 75 x 6 mm (5 ft long) 80 kgs , nut bolt full thread with washer 4 /6 heavy duty , motor 7.5 hp 3 phase (inlet 65mm & outlet , motor 1 hp 01 no. , mccb 100 amp 25 ka 4 pole, rated voltage: 415v ac, 50 hz 08 nos l&t / schneider / abb , tpn 100amp (c-curve) 05 nos , digital clamp meter 02 nos isi 11 standing (pedestal) fans, higher airflow, powerful motor, energy-efficient, oscillation feature for wide coverage 02 nos crompton / bajaj /usha / orient ,air cooler plastic body, capacity 60 ltrs or above

State Government

CTN :45464848

30 Jun, 2026 1.11 Lacs

Mandya - Karnataka

Tender For corrigendum : supply of various types of guy wire, guy rods, insulators etc required for shiva power house, kpcl, malavalli-571 437, mandya district, karnataka.

Central Government/Public Sector

CTN :45593790

19 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126scrap ferrous material consisting of various type of g.i and stainless-steel items like nut, bolt, booms, da sps, mcc channel, top, bottom, fittings, double step rebit, double step, channels, contact, ending cone, anti falling rod, gi rod, maximum quantity guy rod, u type clamps stud etc. and all type of g i and s.s items of trd department of shorts and sizes with or without attachment if any. and minor nf attachment.

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45175483

11 Jun, 2026 NA

Billimora - Gujarat

Tender For bid to ras bid to ras corrigendum : supply of 14 v , transformer 240 6v , transformer 6 0 6 v 1amp 230v , transformer 9 0 9 v 1amp 230v , transformer oil , teak wood batten 300 x 25 x12mm , estrogen lotion 200ml , cake eyeliner different color 5gm , maskra- 4ml , kajal eye kajal pencil for eye makeup , bindi difrent colour and medium size , makeup primer pre make up 35ml , whitetone powder face powder 80 gm container , body lotion , alovera gel 500gm , nail polish red maroon yellow pink purple light blue black white etc , nail accessories nail art kit , foil papar aluminium foil paper 15 mtr , perming lostion 100ml , hairspa cream 500 gm , nilgiri oil for mehdi design 100ml , safetypin for saree small medium and big size each 2 dzn , 2 channel relay , 4 digit led module for clock , 7 segment display unit socket 10 pin , 8 digit led module , breadboard connector male to male , cmos battery 3 volt , common cathode type 7 segment display unit fnd 507 , cro probe bnc to crocodile , dc led lamp 15w 230v , dc solar cable black colour 6 sqmm , dc solar cable red colour 6 sqmm , de solder wick , lcd display module hd 44780 , lcd display module 16by2 , ldr , optocoupler mct 2e , photo diode bpw 34 , photo transistor pt 1504 6b , photo voltaic cell 1point5v , photo voltaic cell 3point3v , push button switch , relay 12v dc , relay 5v dc , acceletore wire splendor , brake wire splendor , carburretor packing set splendor , clutch wire splendor , oil paper sheet automobile , power connector , signal connector , valve grinding stick , valve lapping pest rough and smooth 400grm pack , copper flux , brazing flux , alluminium filler rod dia 1 point 6 mm er308 or 316 , copper filler rod dia 1point6 mm , ss rod dia 1 point 6 mm er308 or 316 , tungsten electrode white 1 percent zerconium dia 2point4 mm , tungsten electrode green pure tungsten 2point4 mm , mig welding wire spool dia 1.2 mm , super enamelled copper wire 36 swg , super enamelled copper wire 23 swg , super enamelled copper wire 29 swg , super enamelled copper wire 20 swg , super enamelled copper wire 42 swg , battery cell aa size, 1.5 v , battery cell aaa size, 1.5 v alkaline , battery 9 v hf with cap , cast iron electrode dia 3 point 15 mm , wireless keyboard , wireless mouse , contact block nc for red push button , contact block no for red push button , banana socket and terminal 4mm black , banana socket and terminal 4mm red , banana socket and terminal 4mm blue , banana socket and terminal 4mm green , ug cable joint kit 50 sqmm , microcontroller educational kit , workshop first air kit ppr joint dia 1 inch elbow, coupling, tee, 45degree, cross, union, ppr joint dia 1by2 inch elbow, coupling, tee, 45degree, cross, union, ppr dia 1 inch to 1by2 inch reducer, bib cock, angle cock double, 2 in 1 angle cock, wall flush cock, upvc dia 1 inch to 1by2 inch reducer, upvc dia 3by4 inch to 1by2 inch reducer, upvc dia 1 inch mta, upvc dia 1inch fta, upvc dia 1 inch to 1by2 inch mt bushing, upvc dia 1 inch to 1by2 inch ft bushing, pvc 50mm coupling, elbow, pvc 63mm coupling, elbow, brazing rod, battery cell r20 size d, external turning insert 150404, m12 by 6 inch hexagonal full thread nut and bolt with washer, olp, open type realy 1by6 hp, carbide tipped boring tool 3by8 inch p30, carbide tipped boring tool 3by4 inch p30, alluminum oxide grinding wheel rough and smooth 300 by 35mm id 20mm, v belt a 50, v belt a 72, v belt a 86, upvc pipe dia 1by2 inch, upvc pipe dia 1 inch, upvc pipe dia 1point5 inch, upvc pipe dia 2 inch, cpvc pipe dia 1by2 inch, ppr pipe dia 1by2 inch, ppr pipe dia 1 //bid details 2 / 103

Central Government/Public Sector

CTN :45454254

12 Jun, 2026 NA

Begusarai - Bihar

Tender For supply of guy rod 9.70 mtrs. long galvanized, ri no.5005, specification no. ti/spc/ohe/fittings 0130 with a&c slip no. -1, eti/ohe/13(4-84) may 2018, ti/spc/ohe/fittings/0130-10/13 rev.-1 and drawing no. ti/drg/ohe/guyrod/rdso/00004/07/0 guy rod dia 25 mm. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45431577

12 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - ohe pole& ferrous sleeper 98050114 scrap m.s. released u/s consisting of mast bfb cut into pieces, mast rsj cut into pieces, mast k-125 cut into pieces, mast k-200 cut into pieces, rsj, k-series ohe poles, bfb, b-200, portals, ferrous sleeper, gi rod, super mast, multi cantilever channel,xarm , adapter fitting, booms, ttc, ttb, drop assemblies, knee-bracing, various types of cantilever tubes, released bridge girder, bridge plate,released bond patti, ohe bolts of various sizes, top fittings, bottom fittings, small cantilever assembly fittings of masts and portals, contact ending cones, adjusters, earth wire, guy rod, guy tube, bearings, ferrous parts of 3-pulley, counterweights, galvanized channel sleepers and gi flats, all material unserviceable and u/s for railway use, sold on %u201cas is where is%u201d basis, loading by purchaser, cutting allowed for easy loading, custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :45431598

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s signaling items i.e. complete signal units, electronic lifting barrier, signaling pole latice with ci attached, cable termination rack, location box full &half, armed wire, sliding boom complete, operating panel, padestal, ristrictor wearing plate, gi boom for elb, nbt block instrument, point machine chasis with accesaries with minor nf attached, lock lever, stop disc for lb, winch m/c, ground connection, rail attached ms board, ms board with angle, ms rusted bars, rods, fire bucket, electric lifting barrier and other signaling items with minor nf attached, c&w items i.e. various types and sizes broken springs, inner springs, released bogie beams offsized outer springs, broken cbc body, striker casting wear plate, man hole cover, pull rod, push rods, plates, knucle pin, brake beams, cp top, knuckle, draft gear box, adeptor, push rod,yoke, yoke pin, knucle pin, safety bracket, brake shoe, pin, nut bolts, top side liners, stricker, primary verticlal damper, yaw damper, vertical shock absorber, vertical sec damper, lateral damper, axel end cover, centric disc, fastners, fire extingyishers offsize & type, beater, pick axe, shovel heat, mechanical jack, hydraulic jack, pad lock, hammer, gi wire, basket, tin case, offsize rack ballast, bucket gi, pan iron, ohe items i.e. offsize and type insulators, ohe high mast cut pieces and other ohe items, ms bond patti, blow lamp, structural clamp, isolator assembly, various boards, retro reflactive number plates, junction box, small chain, anti climbing device, hot rolled steel flat, fuse switch assly, padestal, cantilever assly, da-2, caution board, guy rod with mast & guy attached bolt items of electric and power department i.e. pawrah, el box, switches, etc items of works department i.e. ms angle, plates, ms patra, ms i sections, gi gater, parline, tmt bars, gate post, gate flap and other ms items with some rail pieces attached, items of tele department i.e. cgdb pole, ms boxes, items of p way department i.e. rail dolly, push trolly, hand cart, gi case, broken tiebars, ms engineering boards, rail cum road trolly, ms clamp for joggle fishplate, rail tongue, rusted st slipper, all types of lc boards, ms pipe, ms fishplate, hs lamp, rail toung, whistel thunder, hand operated cutting m/c, hydraulic jack, office clock, dubber for gate lamp, gi bend, broken bdds rsp tool kit, broken bomb blank vehicle search mirror, lock pad, skv welding set, ms sheets, chequered plate, cc cribs, bathing appartus oxygen cylinder , axle box housing, frame of battery etc., above items may have some ss items (the above items may be with minor nf attached or may not be) (the above items may have rusty and dusty or may not be) ( cuting allow for easy loading before delivery) mode of delivery- by weight location ¿ b/h godown 5 & 6

Guy Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Trust

Trust

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector