Latest haccp Tenders | Government haccp Tenders

Central Government/Public Sector

CTN :45372887

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of flash back arrestor(dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/iso 5175-1/is 11006 standards with flame arrestor(fa) and non return valve(nrv) and thermal cut off valve(tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8 lh to en 560/iso 3253 standards. make: messer(dgn fuel) or esab(protex ra) or gce(fr-34 r fuel) only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006 . [ warranty period: 30 months after the date of delivery ] ]

CTN :45363385

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for civil department - purchase of equipment s, sand replacement test apparatus metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300mm with 100 mm hole). another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kitsseamless steel cylinder with no sharp edges. common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products) common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1 wall thickness ~3 mm (industrial products), core cutter aim 161 model core cutter: seamless steel tube (typically 100mm id, 130mm height, 3mm wall thickness). steel dolly: 25mm high, 100mm id, to prevent damage while driving. steel rammer: for driving the cutter. tools: spade, straight edge (knife), moisture containers. , slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate andtamping rod material make : mild steel, jar test apparatus uniform stirring of up to 6 samples simultaneously. stirring rods should be adjusted individually during mixing digital display which should clearly indicate the speed of rotational variable speed 1-200rpm. heavy duty 1/20hp motor with gear train mounted on a mild steel housing. stainless steel stirring paddlers with adjustable height. paddles to be driven by electronically controller variable speed. locking collars or stirring rods permit adjustment height of paddle height. spacing of 6 (150mm) between stirring rods so as to permit use up to 1000ml beaker. the digital timer to be set to count down from 1 to 99 minutes. housing material: crc / ms sheet duly powder coated. power consumption : 220/230v ac supply 50hz single phase motor : 1/ 20hp motor good quality illumination : built in illuminator beaker : 6 nos 1000 ml beaker 1, compression testing machine 1000kn capacity capacity: 1000 kn type: hydraulic,floor-mounted accuracy: 1% of indicated load load application:smooth, uniform, controlled platens:hardened steel platens, suitable for concrete cubes/cylinders safety:overload protection, pressure relief valve, emergency stop, safety guard standards: is 516 / astm / iso compliant power supply: 415 v, 3-phase, 50 hz accessories: platens,spacers, pressure gauge, operating manual calibration: factory calibrated with certificate installation & training: included

CTN :45222157

03 Jun, 2026 25.29 Lacs

Kamrup - Assam

Tender For corrigendum : procurement of flood fighting materials (e.c bag) for water resources department for the year 2026-27 (zone-a). - supply of ec bag of size (0.49 0.83 n) inner to inner dimension, made of 87 gsm manufactured from woven polyester of white colour with minimum properties i. strip tensile strength (warp/weft) as per astmd 5035 7kn/m ii. tensile elongation as per astmd 5035 20 % iii. cbr puncture resistance as per astmd 6241 850 n iv. mullen burst astmd 3786 700 kpa v. aos as per astmd 4751 425 micron vi. water flow/permeability 60 lt/m2/min stitching of bags should be mouth open and bottom sfds. including 3 mm dia. polyester rope of length 75 cm, punched 10 cm from the top & 3 cm from edge, rope strength 300 lbs.(bags are to be supplied a bundle of 100 numbers, properly packed with name of manufacturer and batch number and each bag to be marked with wrd govt. of assam to be printed with minimum font size height of 50 mm on each bag and mentioning properly the gsm and type of geo bag polymer. test certificate from approved nabl accredited and iso certified laboratory should invariably be submitted against each batch of material).

CTN :45354531

08 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of iso certificate

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

State Government

CTN :45317723

01 Jun, 2026 11.45 Lacs

Delhi - Delhi

Tender For supply of flood fighting material in the jurisdiction of civil division-xx - supply of wooden ballis of size 12 and thickness 3.5" including transportation, loading and unloading etc. complete at site., providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50x25 mm, fixed with nails and g.i wire on existing support complete as per direction of engineer-in-charge., providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012,morth clause 2500, of required size, mesh type 10x12 (d=100 mm with tolerance of 2%) zinc+ pvc coated, mesh wire diameter 2.7/ 3.7mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(id/od), supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineer-in- charge., supply of geo textile bags manufactured using high-quality pet & pp material, ensuring superior strength, durability, and safe bulk handling. designed with a storage capacity of 100 120 kg sand and dimensions of 1.03 m 0.7 m. with a gsm range of 300 400, including transportation, loading and unloading etc. complete at site.as per direction of engineer in charge.(bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of manufacturer, batch number, the gsm and type of polymer encrypted and stitched on top corne .test certificate from approved nabl accredited iso certified laboratory should invariably submitted against each batch of material), providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with: sal wood.

Central Government/Public Sector

CTN :45335630

02 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of bulk water meter 100 mm for cold water woltman/vane wheel type, class b, caste iron casing , brass/plastic impeller, gauge dial : vitreous enamel , having flange type confirming to iso 4064 or is 2373 and with calibration certificate. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335631

02 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of 150 mm bulk water meter woltman type, calss b, caste iron casing, having flange type , brass/plastic impeller, gauge dial : vitreous enamel for cold water with calibration certificate and confirming to iso 4064 or is 2373. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45077643

03 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of materials required for 80ah/10 amp tfbc generally conforming to rdso spec. - irs:s:89/2013 ver 1.0. as per annexure- i and spec. i & iii enclosed herewith. material for assembled control pcb should be as per drg. no. s&t/by/f-358 alt-1.material should be supplied from only valid iso-9001 (qms) certified firms to quote. party to submit warranty certificate with 30 months . [ warranty period: 30 months after the date of delivery ]- ms foundation plate for sensor base , ms foundation plate for rsiv base , ms foundation plate for cfl sb base , ms foundation plate for pipe support , ms foundation plate for bus bar support , ms foundation plate for sensor base , ms foundation plate for ammeter shunt

Central Government And Public Sector

CTN :45335757

29 May, 2026 NA

Bangalore - Karnataka

Tender For supply of directional control valve of m/s.vickers. make model no :dg4v-3s-2n-muh5-60/ orexactly equ1valent make to m/s rexroth, m/syuken. m/s parker special condition ;-a) mounting should be subplate (iso/cetop 3), b)only authorised dealers / distributors of the oem shall quote. c)test certificate and warranty certificate shall be submitted along with the supplied item [ warranty period: 12 months after the date of delivery ] ]

Haccp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector