Latest hack saw blade Tenders | Government hack saw blade Tenders

Central Government/Public Sector

CTN :45359330

19 Jun, 2026 NA

Kutch - Gujarat

Tender For supply of m seal , thread seal , feviquick , araldite , anabond , crc , wd 40 , fine emery paper , emery paper rough , cutting disk , sanding disk , hinge , hack saw blade , cobbler nails , nails , ss screw , self-screw , ply wood , ss nut bolt , silicone , insulation , thread , battery , butane gas , t-shirt cotton , s.s clamp , flexible hose pipe , fevicol white , fevicol

Central Government/Public Sector

CTN :45366634

19 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cutting holes in

State Government

CTN :45367498

19 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

CTN :45370651

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 11 point 7 hp engine and high head water pump as per ts,puf tank 500 ltrs as per ts,spares tools oblique kit for each engine as per ts,high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585,tank connector,ball valves brass min 15mm,non return valve,pressure relief valve,by pass valve,suction stainer,25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank,suction pipe 25 mm dia of length 3 and 4 mtr,hand operated rotary pump,hack saw blade of size 300 x 13 x 0 point 65 mm,closed grip heavy duty hand hack saw frame suitable for 300mm blades

CTN :45357247

11 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of 11 point 7 hp engine and high head water pump as per ts , spares tools oblique kit for each engine as per ts , puf tank 500 ltrs as per relevant is , high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585 , tank connector , ball valves brass min 15mm , non return valve , pressure relief valve , by pass valve , suction stainer , 25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank , suction pipe 25 mm dia of length 3 and 4 mtr , hack saw blade of size 300 x 13 x 0 point 65 mm , closed grip heavy duty hand hack saw frame suitable for 300mm blades

CTN :44971431

01 Jun, 2026 5.10 Lacs

Bangalore - Karnataka

Tender For bid to ras supply of plumbig items c c - 20mm cpvc coupler , 25mm cpvc coupler , 40mm cpvc coupler , 50 mm cpvc coupler , 50mm to 40mm cpvc reducer coupler , 20mm cpvc elbow 90 degree , 25mm cpvc elbow 90 degree , 40 mm cpvc elbow , 50mm cpvc elbow , 20mm cpvc tee , 25mm cpvc tee , 40 mm cpvc tee , 50mm cpvc tee , 50mm to 25mm cpvc reducing tee , 20mm cpvc end cap , 25mm cpvc end cap , 40mm cpvc end cap , 63mm cpvc end cap , 20mm cpvc ball cock float valve with ball , 20mm cpvc female adapter plastic threaded , 20mm cpvc male adapter plastic threaded , 25mm cpvc female adapter plastic threaded , 25mm cpvc male adapter plastic threaded , 40mm cpvc male adapter plastic threaded , 40mm cpvc female adapter plastic threaded , 50mm cpvc male adapter plastic threaded , 50mm cpvc female adapter plastic threaded , 40 mm cpvc union , 50mm cpvc union , 20mm cpvc tank nipple , 25mm cpvc tank nipple , 63mm pvc pipe , 90mm pvc pipe , 110 mm 6 meter pipe , 25mm pvc coupler , 40 mm pvc coupler , 63mm pvc coupler , 50mm to 40mm pvc reducer coupler , 63 mm to 50mm pvc reducer coupler , 110mm to 63mm pvc reducer coupler , 63mm pvc elbow , 110 mm pvc elbow , 20mm pvc tee 90 degree , 40 mm pvc tee 90 degree , 40mm to 20 mm pvc reducing tee 90 degree , 63mm pvc tee 90 degree , 90mm pvc tee 90 degree , 32mm pvc gate valve , 40 mm pvc ball valve , 63mm pvc union ball valve , 63mm pvc ball valve , 20 mm inch brass mini valve , half inch pvc gate valve , 25mm hack saw blade , 25mm gi hose nipple , 25mm pvc male adapter plastic threaded , 25mm pvc female adapter plastic threaded , 40 mm pvc male adapter plastic threaded , 40 mm pvc female adapter plastic threaded , 40mm pvc end cap , 40mm pvc elbow , 20mm pvc female adapter plastic threaded , 50mm g i elbow , 50mm hex nipple gi , 50mm gi tee , 50mm gi collar , 50mm nrv , 63mm pvc male adapter plastic threaded , 63mm pvc female adapter plastic threaded , 90mm pvc male adapter plastic threaded , 90mm pvc female adapter plastic threaded , 90mm gi tee , 90mm pvc end cap , 90mm to 63mm gi reducer , 3 by 4 inch gi hose nipple , pvc gum 250 ml , adjustable tubular hacksaw frame wooden handle , metal paste white , 180mm mild steel casing pipe , 184mm mild steel casing pipe coupler //bid details 2 / 65

Central Government/Public Sector

CTN :45358690

19 Jun, 2026 NA

West Godavari - Andhra Pradesh

Tender For supply of drip materials for annual maintenance - 90mm pvc pipes - 6m, 110mm pvc pipes - 6m, 50mm pvc pipes - 6m, 40mm pvc pipes - 6m, 16 mm x 400m lateral tube, 12 mm x 500m lateral tube, 6mm x 250m micro tube, mini spray jet 270⁰ 68lph, j-turbo keyplus dripper 8 lph, j-turbo keyplus dripper 4 lph, screen filter 25m³ - 2", screen filter 30-40m / hr 90mm³, hcf 25m3/hr63mm, hcf 50m3/hr90mmp, barbed poly joiner 16mm, barbed poly joiner 12mm, poly joiner 6mm (short), barbed goof plug 2.9mm, black dummey 6mm, screw end 20mm (1/2") th bv, screw end 25mm (3/4") th bv, screw end 32mm th bv, 1/2 brass ball valve, 3/4 brass ball valve, brass ball valve (hy), control valve 40mm moulded seal, control valve 50mm moulded seal, flush valve 40mm, flush valve 50x63 (2"), flush valve 63mm, perma fix 1l-t1, hack saw blade (dt), blades single edge, m seal 100 gm, pvc coupler 6kg/cm2 40mm lw, pvc coupler 50mm lw, pvc coupler 4kg/cm2 63mm lw, pvc coupler 4kg/cm2 75mm lw, pvc coupler 4kg/cm2 90mm lw, pvc coupler 4kg/cm2 110mm lw, pvc elbow (equal) 90mm-lw, pvc elbow (equal) 75mm-lw, elbow 63mm pn6, pvc elbow (equal) 50mm-lw, pvc elbow (equal) 40mm-lw, j-pvc tee (equal) 90mm-lw, j-pvc tee (equal) 75mm-lw, j-pvc tee (equal) 63mm-lw, j-pvc tee (equal) 50mm-lw, j-pvc tee (equal) 40mm-lw, j-pvc m.thr.adpt. 3" 90mm-lw, j-pvc m.thr.adpt. 4" 110mm-lw, j-pvc m.thr.adpt. 2.5" 75mm-lw, j-pvc m.thr.adpt. 2" 63mm-lw, p.m.t.a 50mm, p.m.t.a 40mm, j-pvc f.thr.adpt. 4" 110mm-lw, j-pvc f.thr.adpt. 3" 90mm-lw, j-pvc f.thr.adpt. 2.5" 75mm-lw, j-pvc f.thr.adpt. 2" 63mm-lw, j-pvc f.thr.adpt. 1.5" 50mm-lw, dis fta 40mm hd, bend 90mm x 04kg 90⁰, bend 75mm x 04kg 90⁰, bend 63mm x 04kg 90⁰, bend 50mm x 06kg 90⁰, bend (h) 40mm, end cap (plain)-hd 110mm, j-pvc end cap (palin) 90mm-lw, j-pvc end cap (palin) 75mm-lw, j-pvc end cap (palin) 63mm-lw, end cap (plain)-hd 50mm-lw, end cap (plain)-hd 40mm-lw, 3" gate valve, 2 1/2" gate valve, 2" gate valve, 1 1/2" gate valve, 3" delivery flange, 90mm threaded coller falnge, ss bolt nut 2washer size 1/2" x 1 1/2", ss bolt nut 2washer size 1/2" x 2", 3" flange washer, reducing flange 3" x 2 1/2", flange rubber 75mm, nipple 3" x 4", nipple 3" x 6", nipple 2 1/2" x 4", nipple 2 1/2" x 6", j-pvc reducer m/s 110 x 90mm-lw, j-pvc reducer m/s 90 x 75mm-lw, reducer 50 x 40mm, j-pvc reducer m/s 110 x 75mm-lw, j-pvc reducer m/s 75 x 63mm-lw, pvc low friction n.r. valve 90mm (3"), jet stake, sprinkler micro stake 16mm, foot valve (flap) 1", foot valve (s) 25mm, 2" section hose pipe, 2" hose coller, 2" hose clamp, 3/4" water pipe, sprinkler 110lph, inline lateral r 16mm 4 lph 40 cm, elbow 12 mm, hamali charges

Central Government/Public Sector

CTN :45347699

15 Jun, 2026 9.99 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of ms sheet , aluminum sheet , aluminum checker plate , araldite and hardener , buffing wheel , cutting wheel , drill bits set ss 1 to 5mm , emery paper , emery wheel , metal primer , m seal , steel handle , teflon tape , wd 40 , beading wooden flat , bolt nut ss full threaded with washer , bolt nut ss full thread with washer , brazing rod aluminum , clamp for pipe gi , curtain rod aluminum , curtain rod centre clip bracket , curtain rod ss , electrode aluminum , electrode ms , electrode ss , fevicol sr , filler rod brass , filler rod lead , handle aldrops ss , handle aluminum , hinges brass , hinges ms , hook aluminum , hook curtain knob , nails , nylon belt velcro , pipe curtain , rivet flat ms , rivet aluminum , screw , screw brass , sheet gi , split pin , varnish , washer ss , battery for multimeter , double side stick tape , cotton tape , hardener , loctite rtv silicon , loctite , antirust spray , anabond 666 , emery sheet , hack saw blade , distilled water , drill bit 1mm to 10mm , fevi quick or quick fix , insullation tape pvc , soldering iron , soldering flux , devocon putty alluminium , wooden beading half roud , hinges ss , wood primer 01 ltr , wax , l clamp ss , circular saw cutting blade , acrylic pasting glue , window or door latches hook , clamp for board , curtain bracket ss , alluminium sheet , gi sheet , pop rivet , self drilling screw , pin nails , chopsaw cutting wheel , acrylic sheet ) /bid number : gem/2026/b/7544599 * /dated: 27-05-2026 & & / bid document 1 / 75

Central Government / Public Sector

CTN :45343107

08 Jun, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - ms scrap ¿ 39.420 mts- delivery on actual weightment basis only. lot no 5454 26 05 20 gtl gtl ms ap. available with sse br n gtl. scrap condemned and un-serviceable released ms scrap consisting of -- (1) galvanised channel sleepers of sizes ¿ 132 nos ¿ 18.789 mt; (2) galvanised channel sleepers of sizes ¿ 22 nos ¿ 3.179 mt; (3) ms stools ¿ 40 nos ¿ 6.822 mt; (4) ms angles, plates, rcc rods, beams, channels ¿ 5.300 mt; (5) ms pad plates ¿ 100 nos ¿ 4.537 mt; (6) ms bed plates ¿ 13 nos ¿ 0.793 mt. total qty . : 39.420 mt (approx.) available at guntakal, inside sse bridges north gtl office compound. s s no g/w/gtl/gsleepers/brin/26-27/19, sl no. 1,2,3 and stack no.¿ g/w/gtl/ms scrap/brin/25-26/243, sl no. 1,2,3 and stack no.¿ hsn code: 730210 - gst 18%. note to the bidders 1) successful bidder is advised to pay bsv at the earliest and approach all the concerned witnessing officials immediately along with delivery point fixation letter for taking loading to avoid last minute rush and unforeseen circumstances 2) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.3) post auction no representation shall be entertained.4) for photos of this lot, kindly click on view lot image on bottom left side. 5) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description. 6) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 7) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 8) clubbing of the lots, what so ever, is not permitted for loading 9) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 10 railways does not guarantee for quality, quantity description etc. 11. katcha road available

Central Government/Public Sector

CTN :45343208

04 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap ms, ci & gi released from maintenance and unserviceable such as released gi pipes of different sizes, released tie bar make fencing and other articles, released ms sheet section make different articles released gi sheet, released off size n g rail of different sizes, released iron grill, released angle of various sizes, released flat & steel plate of various sizes, released ismb & ismc, released ms rod, plates, channel & angles, release xpm jali, released hand pump accessories, released ms hollow pipes, released rail off size from abandoned structures, released gi/ci fitting & pipe of different dia, released reinforcement, released ms doors & windows, released ci make articles, released reinforcement steel from rcc and rcc dismantling material etc with or without negligible attachments, if any (cutting allowed at the time of delivery).qty 85.00 mt. delivery by actual weight only and on as is where is basis. custodian: sse works bh, fdp 50 days. the lot details are as per survey sheet only.

Hack Saw Blade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector