Latest hack saw Tenders | Government hack saw Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :45718270

09 Jul, 2026 4.60 Lacs

Patna - Bihar

Tender For supply of suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg , sliding bolt brass 300 mm with nut and bolt , gi nipple 15 x 100mm , door handle aluminium 125 mm , gi nipple 15 x 300 mm , pvc waste pipe for urinal 1 mtr long , gi nipple 15 x 150 mm , door handle aluminium 100 mm , helicol door spring 125 mm length , ms sliding door bolt 250mm , butt hinges ms 100 mm , cp grating 100mm with 1 hole of waste pipe , helicol door spring 250 mm length , galvanised steel tubing 20 mm dia with socket , door stopper aluminium double , curtain rod stainless steel with brackets 20mm , gi nipple 15 x 50mm , gi bend 15x100 mm , gi tubing 15 mm med gde , gi bend 20x100 mm , gi nipple 15 x 25mm , white portland cement with plastic packing of 1 kg wt each packet , nails wire 25mm , gi socket 15 mm , gi tee equal 20mm , gi bend 15x150 mm , gi bend 15 mm dia , gi nipple 15 x 75mm , gi reducers socket 20 x 15 mm , door handle ms 100 mm , hasp and staple aluminium 100 mm , gi tee equal 15mm , curtain rod aluminium 20mm , gi reducing elbow 20 x 15 mm , tee 15mm , gi union socket 15 mm , sliding door bolt aluminium 200mm , cp rigid conduit pipe ms 15mm x 12 feet long for curtain , oil putty for fixing of window glass , hasp and staple aluminium 75 mm , bow handle ms 125mm , bow handle aluminium 150 mm , tower bolt aluminium 100mm , door stopper aluminium single , gi elbow 20 mm dia , gi socket 20 mm , gi bend 20x150 mm , gi nipple 20 x 300 mm , gi union 20 mm , gi bend 20 mm dia , m seal small packet , gi elbow 15 mm dia , ms screw wood 50 mm , gi elbow reducing 25x20 mm , tower bolt 100 mm dia , gi elbow reducing 25x15 mm , gi elbow reducing 32x15 mm , ms screw wood 65 mm , helicol door spring 150 mm length , nails wire 50mm , bow handle aluminium 75 mm , gi plug 15 mm dia , gi plug 20 mm dia , ms plug 20 mm , gi nipple 20 mm 6 inch long , gi nipple 20mm x 150mm , ms plug 15 mm , ms screw wood 15 mm , butt hinges ms 125mm , gi plug 25 mm dia , hack saw blade double edge 300 mm , butt hinges ms 75 mm , butt hinges ms 50mm , ms screw wood 25 mm , hasp and staple aluminium 50 mm , gi elbow reducing 40x20 mm , hasp and stapple aluminium125 mm , ms screw wood 75 mm , gi union socket 25 mm , ms screw wood 45 mm , ms screw wood 35 mm , tape teflon size 12 x 0 point 75 mm x 10 long , ms screw wood 20 mm

CTN :45716962

18 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of plywood , mcb , mild steel loop holes size 900x450mm with all fitiing , ms door , ms loop hole with shutter , ms prefabricated steel door , ms single bunk bed with ply cushion , ms steel ladder , nut and bolt for srt , office table big , oil bound distemper , paint brush , pc cable 6 sqm 2 core copper , pbs roll , peg stay 6 hooks , pendent holder , pipe 40 mm 20 ft long , pillar cock , pit cover for lc , plywood 9mm 6ftx3ft , pp gi 10ft long green colour , pp gi sheet 12ft , punch tape , pvc bd 8 x 10 inch , pvc bd 6 x 4 inch , pvc cable 2 core copper , pvc cable 10 sqmm 2 core aluminum , pvc chair with arm , pvc pipe 3inch , pvc door , rectangle pipe 2inch x 1inch , pvc reducer socket 1inch x 3inch , round up , sand , scatling , septic tank cover , shover , sleeping double bunk bed cushion , sliding bolt 10inch , soakage pit cover , soap disc , socket 4inch for pvc pipe , solution for pvc , srt 10ft , stainless steel hand wash basin with frain pipe and waste coupling , stainless steel dispenser , steel but hinges 3inch door hinges , starter 3 phase , steel door size 900 x 1800mm with all fittings , steel ladder , steel locker size 770x600x950mm , steel window , steel sink , stop cock , switch 5 amp , switch 5 amp comb , switch socket 15 amp , syntex stand , tab , tarpin oil , tefflon tape , table rod complete set , thinner , toilet seat cover , towel rod , tower bolt , u clip 25 mm , urinal port with waste pipe , union 1 inch , ventilator size 450x300 , non skid vetrified tiles 2ft x 2ft , wall mounting fan , wash bain piller cock , waste pipe , water camper stand , water proof plastic , water storage tank , welding rod , wc seat , white cement , wire mesh 4x20ft , wire 3 core 10sqmm , window rain protector , wire t c 16 sqmm , wooden board 8x8x2 , wk station table , wooden primer , wooden cabinet , cement opc 43 grade , hdpe film 500 micron , ceramic wash hand basin with all fittings , bib tap , pvc low level cistern 10 ltr capicity , cgi sheet 8ft , srt 8ft , 4mm clear acrylic sheet in lieu of glass for window , glass putty , pvc copper wire , ppgi sheet 6ft , plywood 8ft x4ft 12mm thick , 100 mm thick machine pressed interlocking paver block , pcc bricks , false ceiling tullu pump, 16 amp switch , 4 inch dia pvc plastic pipe, 5 amp s socket , aggregate , air filter , aluminium door , aluminum door closure, angle holder, bib cock brass, binding wire, black fill compound , paint, bow handle, brass rod, camper stand , celling fan , celling light , ceramic non skid tile 1ft x 1ft, cgi sheet 10ft, chair plastic , chair revolving, change over switch 32 amp, cloth hook, cob garden light, colour coated sheet 1ft long , concertina coil, concrete block , coolent , cp hose pipe , cpvc elbow 1inch, cpvc nipple 1inch, cpvc pipe 1inch, cpvc socket 1inch, cpvc tee 1inch, cpvc union 1inch, cutting disc 4inch, door rain protector , door stopper , double bunk bed , earthing set , elbow 4inch for pvc pipe , entrance canopy with cgi sheet fitted , exhaust fan, false ceiling 2ft x 2ft, fan belt, fan capacitor , fasterner , fire extinguisher 2 kg, flexible pipe 2 inch, flexible pipe 20mm, floor tiles of size 11inch x 11inch, flush tank pvc with complete, fly proofing door aluminium, fuel filter element, fuel pipe , gang box, gate valve, geyser 3 ltr, gi elbo , gi elbo , gi pipe 20 ft long, gi union, gi pipe socket, gi pipe union, gi pipe 20 mm socket, gi pipe socket, gi pipe union, gi pipe socket, gi socket, glass pane , hdpe can 35 ltr, hand jet spray, hdpe sand bag, hot and cold pipe 450mm, hexa blade, indian toilet seat, insulation tape, ismb, inverter led bulb, karandi, j hook angle small, ismb , ldpe film 130ft x 18ft, led bulb 15 w, led bulb 9 w, led security light 33 w, led tube light //bid details 2 / 141

CTN :45727070

09 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For supply of bricks , sand , agg 20mm , agg 10mm , agg 63mm , coarse sand , cement , binding wire tata , white cement jk , wire brush , enamel paint gloss r y b g bk wh 6 ltr each , enamel paint matt r y b g bk wh 6 ltr each , turpentine oil , cotton waste , poster colour 12 shade , water tube colour 12 shade , glass marking pencil , distemper white , wall putty , emery paper 200 320 and 400 nos 25 each , stainer wall nut rose wood oak yellow red brown teak , washing thinner , touchwood 4 ltr pack , stain powder r br y bk 1 kg each , writing brush round 0 to 12 no , writing brush flat 0 to 12 no , water painting brush 0 to 12 no , oil painting brush 0 to 12 no , mixing plate tray , distemper brush , roller brush , putty blade , paint brush 1 inch , paint brush 2 inch , paint brush 4 inch , glass glue locitte , glass 2mm , glass 8mm , glass sanding disc , masking tape , acrylic putty , wall primer , canvas board 16 inch x 12 inch fine grain , universal stainer r y b g 1 btl each , diamond glazer , malmal cloth , duco primer , duco paint gloss r y b g bk wh 6 ltr each , duco paint matt r y b g bk wh 6 ltr each , duco thinner , pgi sheet 8 ft x4 ft x 24g , gi wire 2mm , gi wire 4mm , ms flat 1 pt 5 inch x 1 pt 5 inch x 5mm , ms flat 1 inch x 1 inch x 5mm , ms flat 2 inch x 1 inch x 5mm , ms square pipe 1 inch x1 inch x3mm , ms round pipe 1 inch x 3mm , ms rod 25mm , ms round bar 10mm , ms angle iron 25x25x3mm , ms angle iron 35x35x3mm , ms sheet 6 ft x 3 ft x 3mm , aluminium plate 3 ft x 4 ft , ms flat 2 inch x 5mm , gi pipe 3 by 4 inch , gi rivet no 8 500 gm , gi rivet no 10 500 gm , gi rivet no 12 500 gm , distilled water , u clip 6 mm , u clip 7 mm , u clip 9 mm , rawlplug 1 pt 5 , casing capping 25mm , extension board 15 amp modular , 3 pin top 15 amp , capacitor 42 mfd , fire fighting foam chemical 1 by 2 ltr btl , timber teak 10 ft x 2 inch x 2 inch cft 5 , timber sheesham 8 inch x 6 inch x 1 inch , plywood 8 ft x 4 ft x12mm , plywood 8 ft x 4 ft x 19mm , cnc bit flat bottom straight flutes bit 2 3 4 6 mm 5 each , cnc bit ball nose bit round tip 2 3 4 6mm 5 each , welding rod no 10 , cutting disc 14 inch , grinding disc 4 inch , grinding disc 8 inch , cutting disc 4 inch , aluminium filer rod 1 by 8 inch , brass rod 1 by 6 inch , copper rod 1 by 16 inch , brazing flux 1 kg pkt , acetylene gas , oxygen gas , co2 gas , nitrogen gas , soft coal , hack saw blade 12 inch , drill bit all size 2 to 13 mm bosch , power hacksaw blade 18 inch , black screw 3 by 4 inch 500 pc , black screw 1 inch 500 pc , black screw 2 inch 500 pc , sanding disc 4 inch , tile cutter blade 4 inch , tile cutter blade 121 by 141 bosch gdc , marbal grinding disc size 0 1 2 3 60 80 120 2 each size , marble polishing disc , silicon sealant with gun 250ml , pu expanding foam sealant with gun 250ml , spray paint gun , chain saw blade 18 inch , chain saw blade 16 inch , hand gloves , welding holder , hacksaw frame , duracell bty 1 pt 5v ultra

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

CTN :45689806

06 Jul, 2026 NA

Nilgiris - Tamil Nadu

Tender For procurement of misc maint stores - aluminium sliding door bolt 250 mm , aluminium sliding door bolt 300 mm , aluminium tower bolt 300mm , aluminium curtain rod 15 mm , aluminium curtain rod 20 mm , u clamp for 15 mm dia gi pipe , u clamp for 20 mm dia gi pipe , ms kitchen sink clamps , aluminium floor door stopper 75mm single , aluminium floor door stopper 100mm single , aluminium floor door stopper 150mm single , aluminium hydraulic door closer 150 mm right , aluminium hydraulic door closer 150 mm left , aluminium hasp and staple 75mm , aluminium hasp and staple 100mm , ms hinges butt 100 mm , ms hinges butt 50 mm , ms hinges butt 75 mm , mildsteel helical door spring 150mm , ms piano type butt hinges 20 to 30 mm x 6 feet , ss soft close hinges , ss telescopic channel 600 mm , magnetic catcher , window hook 100 mm , float valve brass 20 mm , float valve brass 25 mm , ss curtain bracket 15 mm , ss curtain bracket 20 mm , ss curtain bracket 25 mm , cabinet mirror 450 x 350 mm , cabinet mirror 400 x 500 mm , corner glass shelf , glass shelves for bath room , cp toilet paper holder , cp towel rail 150mm , cp towel rail 600mm , cp towel rail 900mm , cp towel rack 600mm 3 rod type , coat hook , cp towel ring , cp soap dish tray , cp waste coupling for whb 32mm , cp waste coupling 40 mm dia for kitchen sink , cp waste coupling 50 mm , upvc door locking system , upvc window locking system , pvc coupling 40 mm , ewc seat cover with hinges , ewc with p trap isi marked , ewc with s trap isi marked , iwc with p trap isi marked , pvc low level flushing system 10 ltrs cap , pvc syphone kit for flushing cistern 10 ltr , syphon kit for cascode , wash hand basin ceramic type size large 550x400mm , ci floor drain trap 100mm dia , ci floor drain trap 125mm dia , stainless steel kitchen sink with drain board 37 inch x 18 inch x 8 mm thick , stainless steel kitchen sink with out drain board 18 inch x 16 inch x 8 mm thick , stainless steel plate rack of size 24 inch x 30 inch x10 inch , stainless steel plate rack of size 31 inch x 36 inch x10 inch , stainless steel plate rack of size 36 inch x36 inch x10 inch , gi barrel nipple 15mm x 200 mm , gi barrel nipple 15mm x 250mm , gi barrel nipple 20mm x 200mm , gi barrel nipple 20mm x 300mm , gi barrel nipple 20mm x 75mm , gi elbow reducer 15mm x 25mm , gi socket reducing 15mm x 25mm , gi socket reducing 20mm x 40mm , gi tee reducer 15mm x20mm , gi tee reducer 15mm x 25mm , cp extension nipple 15 mm , cp extension nipple 25 mm , cp extension nipple 40 mm , gi tubing 40 mm x 6 feet , gi pipe med grade isi marked 15mm bore , gi pipe med grade isi marked 20mm bore , al wire mesh 24g x 20 mesh x 0.9 mtr wide x 15 mtr , hack saw blade , pvc pipe 40 mm , pvc pipe 50 mm , pvc pipe 75 mm , pvc pipe 100 mm , bleaching powder , nrv vertical 15 mm , putty for window frame , glass plain 4 feet x 3 feet x 4mm , pvc connection 15 x 300mm with brass union at ends , pvc connection 15 mm x 450mm with brass union at both ends , pvc connection 15mm x 600 mm with brass union on both ends , pvc waste pipe 32 mm dia and 750mm for wbh , pvc waste pipe 40mm dia and 750mm long suitable for urinal , pvc waste pipe 50 mm , pvc float valve 15 mm with alum rod , pvc elbow 40 mm , pvc elbow 75mm , pvc elbow 100mm , pvc tee 40mm , pvc tee 75mm , pvc plug 15 mm , bitumen emulsion for road , bitument pothole patching mix readymade , bps roll 10 feet x 3 feet , app membrance 15 x 1.2m , water proof cover 10 feet x 10 feet , tarpaulin roll 4 feet x 10 mtr , tank lid cover , pvc water storage tank triple layer of 500 ltrs , pvc water storage tank triple layer of 1000 ltrs , cement white 1kg pack , paint brush 75mm width , cloth tapestry superior quality width not less than 48 inch , cloth green baize 54 inch wide , cloth gada 54 inch wide , taflon tape , adhesive s h paste , adhesive s r paste , foam cushion of size 22 inch x 21 inch x100mm thick having 40 d , knob for drawer with screw , looking mirror 750x330x5mm table dressing gents ,

CTN :45689856

06 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For procurement of misc maint stores - aluminium aldrop or sliding bolt 200mm , aluminium sliding door bolt 250mm , aluminium aldrop or sliding bolt 300mm , aluminium curtain rod 20 mm , aluminium curtain bracket fancy type 25 mm , cp curtain rod bracket 25 mm , u clamp for 20 mm dia gi pipe , u clamp for 25 mm dia gi pipe , ms triangular corner bracket 25 inch , aluminium hydraulic door closer 6 inch right , aluminium butt hinges 75 mm , mild steel halical door spring 300 mm , mildsteel piano type butt hinges 20 or30 mm x6 feet , cpvc ball valve half turn 25 mm , cpvc ball valve half turn 40 mm , upvc float valve 25 mm , cabinet mirror 450 x 350 mm , corner glass shelf , glass shelves for bath room , cp toilet paper holder , cp towel ring , cp soap dish tray , cp waste coupling 32 mm dia for kitchen sink , mortice lock 100 mm and key , cp over head shower 120 mm , ewc seat cover with hinges , pvc low level flushing system 10 ltrs cap , ss plate rack of size 36 inch x 45 inch x 10 inch , pvc squire shoe , pvc shoe for chair verandah , gi bend 50 mm , gi tee reducer 25 mm x 50 mm , gi pipe med grade isi marked 50 mm bore , ss wire mesh 0.36 mm dia , nylon washer , ms wire mesh 1200 mm wide , hack saw blade , upvc end cap 15 mm , upvc end cap 20 mm , upvc end cap 25 mm , upvc end cap 32 mm , cpvc elbow 15 mm , cpvc elbow 20 mm , cpvc union 25 mm , upvc union 20 mm , upvc union 25 mm , upvc elbow 15 mm , upvc elbow 20 mm , upvc elbow 25 mm , upvc elbow 32 mm , upvc elbow reducer 15mm x 20 mm , upvc elbow reducer 25mm x 20 mm , upvc socket 15 mm , upvc socket 20 mm , upvc socket 25 mm , upvc socket reducer 20mm x 15mm , upvc socket reducer 20mm x 25mm , upvc tee 15 mm , upvc tee 20 mm , upvc tee 25 mm , upvc tee reducer 25mm x 15mm , upvc fta adaptor 20 mm , cpvc mta adaptor 20 mm , upvc coupling 15 mm , upvc coupling 20 mm , upvc coupling 25 mm , upvc coupling 32 mm , cpvc tee 15 mm , cpvc tee 20 mm , cpvc tee reducer 25 mm x 20 mm , upvc bush reducer 15 mm x 20 mm , pvc pipe 20 mm , upvc pipe 15 mm , upvc pipe 25 mm , upvc pipe 20 mm , upvc pipe 40 mm , adhesive for upvc pipes , solvent cement 118 ml , soda ash , sodium hypochlorite , calcium hypochlorite granules , aluminium potassium sulphate , bleaching powder , glass pane 24 inch x 18 inch x 4 mm , looking mirror 600 x 400 mm , ptmt connection pipe 900 mm , pvc waste pipe 32 mm dia and 750 mm for wbh , cutting abrasive wheel for angle grinding , sand paper wheel 4 inch 60 nos , sand paper wheel 4 inch 100 nos , paint brush 75mm width , paint roller 100 mm , paint roller 75 mm , paint roller 25 mm , drill bit 2 mm , drill bit 3 mm , drill bit 4 mm , drill bit 5 mm , drill bit 6 mm , drill bit 8 mm , jumper bit 6 mm , jumper bit 8 mm , packing cloth 150 cm wide , taflon tape , ms panel pin or nails 25mm , ms panel pin or nails 20 mm , pvc gittior rawl plug , adhesive s h paste , adhesive s r paste , pvc seat for chair verandah , pvc moulded seat for chair dining , foam cushion 50 mm wide , foam cushion 40 mm wide for dining chair offr , foam cushion of size 22 inch x 21 inch x100 mm thick having 40 d , knob for drawer with screw , looking mirror 1220 x 380 x 5 mm for table dressing ladies , mirror for table dressing gents 1115 x 510 x 5.5 mm , gi concrete nails 75 mm , nail wire gi 20mm , nail wire gi 25mm , nail wire gi 40mm , nail wire gi 50mm , nail wire gi 60mm , nail wire gi 150mm , prelaminated particle board 8 feet x4 feet x18 mm , plywood bwr 8 feet x 4 feet x 4mm , plywood bwr 8 feet x 4 feet x 6mm , plywood bwr 8 feet x 4 feet x 9mm , plywood bwr 8 feet x 4 feet x 12 mm , plywood commercial 6 feet x 3 feet x12 mm , plywood commercial 8 feet x4 feet x 8 mm , mdf board 8 feet x 4 feet x 12 mm , mdf board 8 feet x 4 feet x 18 mm , ply ost 8 feet x 4 feet x 6 mm , gi elbow 32 mm 3 way , sand paper various grade , steel wood screw 15 mm x 6g , steel wood screw 35 mm x 6g , steel wood screw 35 mm x 7g , steel wood screw 45 mm x 8g , steel wood screw 50 mm x 8g , steel wood scr

Hack Saw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector