Latest half round file Tenders | Government half round file Tenders

CTN :41777208

20 Sep, 2025 NA

Hisar - Haryana

Tender For supply of procurement of a veh spares d d - nk apr kit , nk electro pneumatic valve repair kit , lv1 wzr3 teipl ca5 pk 01 engine compartment cable , nk reducer repair kit , nk sediment drain valve repair kit

Central Government And Public Sector

CTN :41502280

17 Sep, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of electro pneumatic converter , service kit electro pneumatic converter

CTN :41742351

29 Sep, 2025 4.75 Lacs

Bardhaman - West Bengal

Tender For supply of cotton canvas hand gloves for iron and steel handeling , flexible pvc wire 1 sqmm , flexible pvc wire 1.5 sqmm , self adhesive pvc tape 1.8cm x 9m x 0.125mm , welding cable70sqmm copper , cutting nozzle anm 3 by 64in , cutting nozzle anm 1 by 32in , cutting nozzle anm 1 by 16in , welding goggles , led tube light 20 watt , led flood light 100watt , pipe wrench 450 mm , chaser dia complete assly 3 by4 in , hand gloves leather pu coated for welding , half round file 2nd cut 300 mm , flat file 12 inch 2nd cut grade , m seal adhesive 25g packet , adhesive araldite , wheel abrsv cut off 16mm x 100mm x 1.2mm , grinding wheel abrsv6mmx200mmx16mm , clamp 0.5in ms frgd , tap thread cutting, 1 by 4in bsw , tap thread cutting, 5 by 16in bsw , tap thread cutting, 3 by 8in bsw , tap thread cutting, 5 by 8in bsw , tap thread cutting, 3 by 4in bsw , tap thread cutting, 1 by 2in bsw , straight shank twist drill bit hss 6.4mm 1 by 4in , straight shanktwist drill bit hss 4.8mm 3 by 16in , wheelabrsvcutoff 25.4mm x355 mmx2.8mm , cotton waste jute , stud ms 3by4 in x 5 by 8in x 3.5 in without nut , stud ms 3 by 4 in x 5 by 8in x 4in without nut , chaser plane hss die thd , aluminium paint anti rust , red oxide paint synthtc enaml , electrical insulating mat 3ft x 6ft x0.5 in rbr upto 11kv , electrician tool kit set , mechanical tool kit set , hex head bolt 5by 8 x 1.5 inch , ball bearing 6213 , ball bearing 6215 , ball bearing 6217 , ball bearing 6315 ) /bid number : gem/2025/b/6656540 * /dated: 08-09-2025 & & / bid document 1 / 35

CTN :41405337

10 Sep, 2025 NA

Saharsa - Bihar

Tender For bid to ras supply of electrical - solar cell characterization apparatus , b h curve magnetic hysteresis curve experiment with pc with i7 and 16gb ram , hall effect apparatus , electro pneumatic workbench , inductance box capacitance box resistance box , resistivity of semiconductor by four probe method , ldr photodiode phototransistor , digital multimeter , milliammeter analog , microampere meter analog , voltmeter analog , soldering de soldering station , transistor application trainer , pam ppm pwm modulation and demodulation trainer kit , ic 7806 7906 , pll oscillator kit , linear ic trainer , op amp ic trainer , digital ic trainer kit , analog to digital converter and digital to analog converter trainer kit , universal ic tester , analog and digital ic trainer , nano ampere meter analog , nano ampere meter digital , transformer trainer 300va , dc motor coupled 3ph ac motor trainer , ac phase wound slip ring motor with starter switch , electrical voltage current energy watt measurement and calibration trainer

Central Government/Public Sector

CTN :41706240

15 Sep, 2025 NA

Ganganagar - Rajasthan

Tender For supply of combination plier d d - combination plier , nose plier , philips and flat head combination screwdriver 350 mm , philips and flat head combination screwdriver 200 mm , half round file fine 250 mm , round file fine 250 mm , multi meter , square drive metric socket set , ring spanner , combination rachet spanner 16 mm , torque wrench drive 5 to 35 kg , pipe wrench 18 inch , ring compressor

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

CTN :41619944

18 Sep, 2025 2.00 Lacs

Aurangabad-Mh - Maharashtra

Tender For supply of boq for various hand tools : - flat file 150mm cut1 , flat file 150mm cut3 , half round file 200mm cut1 , half round file 200mm cut3 , square file 200m cut3 , round file 200mm cut1 , steel hammer 250 gm , rubber mallet dia 40mm , nylon hammer dia 40mm , hacksaw frame al br 270 1002 , oil can 250 ml , broom brush for work bench cleaning , steeel rule 300 mm , scriber 4.5 x 250 mm , centre punch 90 deg.dia10x100mm , spring divider 150 mm , tringular file 200mm cut1 , tringular file 200mm cut3

Central Government/Public Sector

CTN :41674234

22 Sep, 2025 NA

Abu Road - Rajasthan

Tender For supply of carpenter tool kit, containing of -wooden hand saws, firmer chisels, mortise chiesels, hammers with handle, pincer, iron jack planner, half round file, carpenter tri square, carpenter marking gauge, carpenter vice, vermi and basuala with handle. quantity and sizes of above items are as per detailed technical specification of gem product id (enclosed).

CTN :41464727

08 Sep, 2025 7.51 Lacs

Tinsukia - Assam

Tender For corrigendum : supply of fastners gaskets and tools - m.s. bolts and nuts 0.5 inch x 3 inch full thread , m.s. bolts and nuts 0.5 inchx4 inch full thread , m.s. bolts and nuts 0.5 inchx6 inch full thread , m.s. bolts and nuts 0.5 inchx5 inch full thread , m.s. bolts and nuts 3 by 4 inchx5 inch full thread , m.s. bolts and nuts 5 by 8 inch x 6 inch full thread , m.s. bolts and nuts 5 by 8 inch x 5 inch full thread , m.s. bolts and nuts 5 by 8 inchx4 inch full thread , m.s. bolts and nuts 5 by 8 inchx3 inch full thread , m.s. flat washer 1 by 2 inch , m.s. flat washer 5 by 8 inch , m.s. flat washer 3 by 4 inch , g.i. bolts and nuts 5 by 16 inch x 2 inch full thread , 3mm rubber joint sheet min. width 1 m , 4mm rubber joint sheet min. width 1 m , 5mm rubber joint sheet min. width 1 m , hallite sheet 3 mm thick , hallite sheet 1 by 16 inch , cresent packing 7 by 8 inch or 22mm , cresent packing 5 by 8 inch or 16mm , cresent packing 3 by 4 inch or 19mm , cresent packing 1 by 2 inch or 13mm , cresent packing 1 inch or 25mm , ms bolts and nuts 3 by 4 inch x 2.5 inch full thread , ms bolts and nuts 3 by 4 inch x 3 inch full thread , ms bolts and nuts 3 by 4 inch x 4 inch full thread , ring spanner set,6-32 mm , d.e.spanner set, 6-32 mm , adjustable wrench 200 mm , adjustable wrench 300 mm , drill bit set 1 by 2 inch , drill bit set 3 by 4 inch , drill bit set 5 by 8 inch , drill bit set 1 inch , drill bit set 1 1 by 2 inch , drill bit set 1 3 by 4 inch , drill bit set 2 inch , grinding stone coarse 300mm x 25mm x 50 mm , grinding stone fine 300mm x 25 mmx50 mm , emery cloth 150 grit no.100 , insulated pliers 8 inch , nose plier 8 inch needle , line tester 1000 v , triangular file 8 inch , flat file 12 inch , half round file 12 inch , round file 12 inch , insulated screw driver 12 inch , socket wrench set complete with ratchet , allen key wrench set complete , thread cutting die set 1 inch , thread cutting die set 3 by 4 inch , thread cutting die set 1 by 2 inch , pipe wrench 250 mm , pipe wrench 300 mm , chain tong 300 mm , hacksaw metal frame 12 inch , double edged carbon steel hacksaw blade 12 inch , hand operated insulation tester,0- 500v,1000m ohm , hand operated insulation tester,0- 5000v,1000m ohm , digital multimeter 0-1000v ac,0-1000 v dc , digital ac clamp meter,0-1000a ac , digital tacho meter,0-20000 rpm , 3 legged mechanical bearing puller with jaw reach 15 inch and jaw spread 12 inch.

Central Government/Public Sector

CTN :41586527

16 Sep, 2025 NA

Bharuch - Gujarat

Tender For supply of bihexagonal ring spanner , double open end spanners with rib set* , combination spanner 8mm to 32mm , bihexagonal 21sockets setv8 to 32mm chrome vanadium st in metal box 22soc & 5accs. is-7 , tubular spanner , heavy duty pipe wrench 12" , pipe wrench 18" , pipe wrench heavy duty 24" , pipe wrench l-1200mm , sledge hammer 20 lb , sledge hammer with handle 15 lb , sledge hammer with handle 10 lb , hammer with handle 6 lb , ball pin hammer 1 lb , adjustable wrench 8" , adjustable wrench 12" , double open end spanner 36x41 , double open end spanner 41x46 , chain pipe wrench 920mm x585mm , chain pipe wrench 1100mmx834mm , chain pipe wrench 1200mmx1100mm , chain pipe wrench 1610mmx1360mm , file 1/2 round 2 cut (2cut) 10 in , file flat 2 cut (2ble cut) 12in , flat file smooth 12" , needle file set , triangular file 12" , screwdriver, 300 x 10 mm , screwdriver flat blade 10x450 , long nose plier 6 in insulated , 7" external circlip plier , ratcheted torque wrench 7 to 35 kg- m , torque wrench cap100-400lb. ft 3/4" sq. dr , air ratchet wrench 1/2" sq dr , pneumatic impact wrench 1/2" sq. dr. , angle grinder 4" , grinder hand small (straight) , cutting pliers insulated handle , tool box with lock , allen key set 2 mm to 20 mm , allen key set 1/16 to 1/2 in , flat cold chisel 1x10 in , spirit level 18" , measuring tape 5 mts , insulated plier 8" with side cutter , screw driver , 10" engineers screw driver blade 8mm , polend type heavy duty hack saw fram 12" , screw driver set with tester , manual crimping tool upto 25 sq mm , cable stripper upto 5 sq mm , vice grip plier 230/250 mm , knife 6" , flat file rough 8" , round file rough 8" , half round file rough 8"

Half Round File Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector