Tender For auction sale of others - released condemned and u/s scrap traction motor (type- hs-15250) without pinion earthing brush assembly and connection terminal, qty-15 nos, location- near canteen loco motive care centre ratlam. mode of delivery in number basis and on as is where is basis, custodian sse-dl-rtm, fdp-50 days. note- this lot consisting traction motors numbering sr. no. 1 to 15 by color paint.
Tender For auction sale of others - released, condemned and u/s scrap waste transformer oil released from condemned electric loco, drained burnt blackish, and dga abnormal with 74 nos. iron drum unsuitable for locomotive use, qty- 13.235 mt, location- near old dicanting point loco motive care centre ratlam. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-g-rtm, fdp- 50days. note- (1) original cpcb certificate cum passbook will be required at the time of delivery, (2) delivery will be given along with drum.
Tender For auction sale of others - released, condemned and u/s scrap turning released by tyre turning of loco and coach, qty- 25.00 mt, location- near wheel lath shed at coach care complex dadn. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-c&w-dadn, fdp-50days.
Tender For auction sale of depot ferrous scrap - scrap loco parts consist of gear casing embedded with cardium , inner , outer, and secondary coil spring, conv inner thrust collar, middle lock plate, distance piece, loose lip, space ring, abutment ring, plain racer, lipped racer, thrower, axle box cover, end small plate, carbon plate, with or without nf and ci and other attachments. location- c by 1 three stack
Tender For auction sale of rolling stock - condemned and unserviceable bg alco loco no.wdg3a 13500 with available items [refer enclosure for the material composition].location: diesel loco shed goc. custodian: sse/diesel shed/goc. re-claimable items - [1] wheel set complete [axle, wheel disc, bull gear, rsp tube, axle boxes hnbc with bearings]-6 sets. advice note no.073817-25-14312, dt: 11.02.26. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold loco, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition-[1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery.[2] in order to make the assessment, the purchaser may visit the locos offered for condemnation and the site conditions before quoting the offer.[3]the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment.[4]the weight and quantities were taken into consideration as advised by the custodian [5]the purchaser may note that some of the reclaimable items of locos are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements.[6]the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the locos as directed by the custodian. [7]the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean,free of any left over loco scrap.[10]railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15]if any hsd oil/lube oil available in fuel tank/oil sump of the said locos, the same may be returned to the custodian. [16] in respect of locomotives, the free delivery time for lot removal shall be 80 days from the date of auction
Tender For auction sale of depot non ferrous scrap - p. l. no. 98980725 condemned and unserviceable nickel cadmium loco battery 150/155 ah. (ppcp) make :- saft 155 ah, hbl 150ah ( one number consisting of 5 cells in one stainless steel container with carrying handle). with / without connecting terminal plate, bolts,lugs,wire and nuts, full / broken of sorts and sizes. it is permitted to drain acid / water and to remove vent plugs, if any. average weight- 33 kgs. per number approximately. total weight- 14,880 kgs. approximately. for 451 nos. as is where is basis. rate per number should be quoted. note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery.
Tender For auction sale of depot non ferrous scrap - p.l. no. 98210403 condemned and unserviceable emd / hhp loco radiator assemblies consisting of radiator cores having brass tubes, copper fins and ferrous headers of sorts and sizes. assemblies are of long single core type ( i.e. single segment type) - 2 nos. and double cores type ( i.e. double segment type) -2 nos., assembled with ferrous heads, ferrous flanges, ferrous cover plates etc. as is where is basis. total weight- 2920 kgs. approximately [for 4 nos.]. rate per number should be quoted. delivery should be given in numbers . loading by crane is permitted.
Tender For auction sale of depot non ferrous scrap - p.l.no. 98980750 condemned and unserviceable loco lead acid batteries 8 v, 500 ah of sorts and sizes with / without connecting bolts ( containers: fibre / plastic). it is permitted to drain acid / water and to remove vent plugs, if any. average weight 131.61 kg per number approximately . total weight - 21320 kgs approximately for 162 number . rate per number to be quoted.as is where is basis . note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery. custodian: sse/e/dsl/goc (diesel shed). s.1539 no.073817-25-14361. date:-12/02/26.
Tender For auction sale of depot miscellaneous scrap - p.l. no. 98327150 condemned and unserviceable magnetic frames of traction motor ( mg unit of deisel loco.type:-4603 ) with field coils, interconnecting cables , bus bars , outgoing cables and other orginal attachments . as is where is basis. total weight- 2010 kgs. approximately for 2 nos. rate per number should be quoted. note:-loading by crane is permitted.
Tender For auction sale of depot ferrous scrap - melting 98050114 %u2013 m.s. melting scrap: m.s. melting scrap released from assorted unserviceable rolling stock, track fittings, machinery, coach and locomotive components including pivot pin cover, pick axle, crow bar claw, released p-way key, two way key, dog spike, rail clips, rail tensor, rail trolley, rail tong, fish plates, joggle plates, heavy perforated m.s. plates, m.s. plates, iron plates, steel pattis, rail trolly wheel,channel sleeper fittings, damaged channel sleeper bridge pieces, t-head bolts for channel, bolts, screws, nut bolts of mixed sizes, washers, clamps, securing bolts, cotter pins, loose jaw cotter pin, knuckle pins, supporting device, cbc supporting device, draft gear for cbc, draft gear, draft key, draft yoke, draw hook, enhanced capacity draw hook, draw bar, draw hook beam, bent coupling link, coupling rods, shaku coupler, buffer spindle, spring loaded buffer assemblies, buffer and draw gear, centre pivot foundation box, centre housing, bolster bogie base plate, bogie bolster, bogie bolster hanger, hanger block, bolster spring suspension pins, laminated springs, support springs, broken springs, leaf springs, lb spring, primary and lateral bump stops with or without rubber, emu rubber attached sandwich assemblies, brake rigging links, brake rigging icf, brake rigging levers and levels, brake cylinder assemblies, bmbc brake cylinder, bmbc body, adjusting tube bmbc, brake head, spring brake chamber, brake pads with or without rubber, brake contact assembly, traction links, traction lever, traction motor pinion parts, traction motor bearing cover, bearing shield of traction motor, end shield of traction motor, traction motor gear case assemblies, gears, small gear pieces, gear box, bearing cartridges, dismantled bearing spares with collars, phonic wheels, ctrb, equalising stay, anchor link, diagonal rod, gc bar, point gc, irs point machine slide complete set, point electric detector, junction box for point machine, signal machine parts, tws locking slide with block, e-block, base plate, face plate, face plate for buffer plunger, important elbow, channel, guide t section, parallel guide bar, sej bracket, z-bracket, heavy brackets, stiffener plate brackets, support brackets, reinforcement structure pieces, mechanical linkages, mechanical locking assemblies, supporting device body, cutter chain machine parts, pqrs machine parts, ttm machine parts including hydraulic cylinders, hydraulic jack, mechanical jack 12t/18t/25t, bottle jack, submersible piston rod, torque wrench, spanners, spanner rod, spanner plate, lifting roller, crane chain and hook, loco chain, angle hook, hook bolt, wire rope with or without aluminium crimping, wire rope sling/tow, lp-hp pantograph cylinder, lp-hp cylinder of knorr bremse compressor, lp-hp valve for knorr, westinghouse rdk valve, westinghouse combined brake unit, condenser washer, dirt collector, nrv, dv, diesel generator set parts, metco traverser parts, bcm cotter chain, poh items of bg coaches, motor coach front and rear covers, motor coach collar, icf collar, axle box front cover, centre pivot components, cattle guard, machine base, platform cabin parts, mixed engine material, mixed size bolts, double geared items, hot air gun, released plate screw, cr with common pipe bracket, melting items and other miscellaneous railway m.s. scrap, worn threaded parts, bent or corroded track fittings, damaged traction gear parts and other assorted ferrous scrap; material may contain some attached aluminium and other small non-ferrous parts, grease, oil, dirt and rust.all materials unserviceable and beyond economical repair (ber), not fit for railway use, sold on %u201cas is where is%u201d basis. loading by purchaser. custodian: dms/scrap/pardi.