Latest hand lock Tenders | Government hand lock Tenders

Central Government/Public Sector

CTN :45728172

06 Jul, 2026 NA

Kalka - Haryana

Tender For supply of handle locking bar a.b.c. coupler (n.g.) to drawing no. ep/dg-118/m, nw/bd-8102/m, alt ( 3 ) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45704059

11 Jul, 2026 32.43 Lacs

Bangalore - Karnataka

Tender For tender for supply of c422alh 1224 1228 machining and supply of metallic detail parts 201c 621h 2000 201 - shim (trim chamber) , bracket-top , bracket-top , bracket-bottom , bracket-bottom , channel lh top , channel rh top , bracket , channel lh bottom , channel rh bottom , u plate , angle spring holder , tension spring , spigot fitting , taper shim , bracket , bracket , pin , shaft , bush , roller support , roller support , bearing pin , roller support plate , bracket (middle roller assy.) , pin (middle roller assy.) , hor. roller bracket -lh(middle roll , horizontal roller bracket rh , roller support -lh , roller support rh , bearing pin , counter sunk pin , bracket , bracket -lh(roller bracket) , handle lever , locking pin , guide bracket , bell crank lever-single leg , bell crank lever-double leg , lever support (plain) , lever support (stepped) , spacer , spacer , angle , handle , handle -locking mechanism , bracket , shaft , locking pin extra length , link tube , link tube , link tube , link tube , link tube , link tube , link tube , link tube , bracket (latch)-lh , bracket (latch)-rh , angle-latch bracket , back plate , back plate , wedge , plate , shim , shim , t-section , bracket latch-lh , plate , spring clip latch , tube , strip , connecting plate , plate , plate , hinge fitting(upper)-lh , hinge fitting(upper)-rh , hinge fitting-lh (lower) , hinge fitting-rh (lower) , fitting , washer , lever locking top & bot , lever-locking mech-pilot door , pin (locking mechanism - pilot door , sleeve at handle , sleeve , sleeve bottom , pin (locking mechanism - pilot door , sleeve , lever-locking mech-pilot door , washer , bush , lever-locking mech-pilot door , pin (locking mechanism - pilot door , rod small , fork-end , taper pin (locking mechanism - pilo , guide teflon ps 25640 , rod-lh (locking mechanism-pilot door) , rod - rh (locking mechanism - pilot , handle-lh-locking mech-pilot door , handleinside , lever , lever (locking mechanism) , pin (locking mechanism - sliding do , sleeve , sleeve bottom , pin (locking mechanism - sliding do , bush , lever-locking mech-sliding door , handle-lh-locking mech-sliding door , handle-rh-locking mech-sliding door , rod , rod (locking mechanism) , cover plate , cover plate , fork-end , end fitting , countersunk bolt , bracket ( teflon) , bracket ( teflon) , hs pin , hs pin , taper pin , clip (clam shell door ) , strip cover , strip cover

CTN :45704065

06 Jul, 2026 NA

Faridkot - Punjab

Tender For supply of wind shield glass , front wind shield glass , fuse 20 amps , w lamp bulb , bulb 12 v , fog light assy , spark plug , head light relay , tail light assy , neumatic high assy , direction indicator , isolater switch , ignition switch , air filter assy , commando light , wiper blade , side reflector lamp 24 v , bolt , handle lock lh , stop light switch , relay , relay switch , sleeve cyl r kit

CTN :45583488

01 Jul, 2026 2.00 Lacs

Lohit - Arunachal Pradesh

Tender For bid to ras supply of cgi plane sheet , chainsaw stihl medium , mobil oil , ply wood , saw small , door lock handle lock , door hinge , hammer , plane sheet , pickaxe , spade , toilet sheet plastic , wash basin ss , bucket ss , bucket plastic , toilet pipe , tripal , syntex , hdpe kiti pipe , paint green , paint red oxide , 2t engine oil , chain saw chain chironey , cement opc , nails , rubber water pipe , labour charge per day , transport charge

CTN :45583514

01 Jul, 2026 2.00 Lacs

Lohit - Arunachal Pradesh

Tender For bid to ras supply of cgi plane sheet , chainsaw stihl medium , mobil oil , ply wood , saw small , door lock handle lock , door hinge , hammer , plane sheet , pickaxe , spade , toilet sheet plastic , wash basin ss , bucket ss , bucket plastic , toilet pipe , tripal , syntex , hdpe kiti pipe , paint green , paint red oxide , 2t engine oil , chain saw chain chironey , cement opc , nails , rubber water pipe , labour charge per day , transport charge

State Government

CTN :45676048

02 Jul, 2026 36.57 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

Central Government / Public Sector

CTN :45664781

20 Jul, 2026 NA

Parbhani - Maharashtra

Tender For supply of 1600 a single pole isolator along with earthing heel assembly complete with insulators(25 kv post insulator, 25 kv operating rod insulator) padlock, annual rate contract horns, earthing copper strip, integral lock & terminal connector with complete set including all sps and accessories. as per rdso spc. no-ti-spc-psi-isoltr-0210 with a and c slip no. 1 and 2. [ warranty period: 30 months after the date of delivery ] ]

CTN :45650770

02 Jul, 2026 1.00 Lacs

Pulwama - Jammu And Kashmir

Tender For supply of clip oil separator hose , clutch switch , poly v belt , wabco clutch booster alternate , oil seal assy flange , washer thrust , s a of pipe inj no 03 , s a of pipe inj no 06 , o ring , bush , belt timing , clamp hose , clamp , fuse assy main , lens , handle lock , lock side window rh

CTN :45657805

04 Jul, 2026 6.29 Lacs

Jaisalmer - Rajasthan

Tender For supply of air filter cartridge v 13 , tank water reserve , head lamp f-8043900 6220-004178 , horn assy high , arm assy wiper lh , adjustable spanner 200 205 mm , rear view mirror , lens back up lh , handle lock , oil seal , bush sprg shackle , relay turn signal , minor rep kit for clutch m cyl consisting , minor rep kit for clutch m cyl consisting of , knob , gasket

Hand Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government / Public Sector