Latest hand lorry scrap Tenders | Government hand lorry scrap Tenders

State Government

CTN :40534117

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ac vfd drive and its spares - boiler control pannel, ac drive completeemotron fdu 2.1, type- fdu 48-500-20de- avnnnnan-ainput- 380v-480v, 432amp. 45-65hzmake- c.g. drive & automation., ac drive completeemotron fdu 2.1type- fdu 48-142-20de- avnnnnan-ainput- 380v-480v, 126amp. 45-65 hzmake- c.g. drive & automation., ac drive completemodel- vsm 48-009 20 cnbpower- 3.7kw/5hpinput- ac 3 phase 380-480v, 11amp. 50/60 hz output ac 3 phase 0-u input v 9.5amp. 0-600h3make- c.g. drive & automation., cooling fan of ac drive-emotron fdu 2.1make- c.g. drive & automation., control card for ac drive-emotron fdu 2.1type- fdu 48-500 20de/de 48-142 20demake- c.g. drive & automation., power card for ac drive-emotron fdu 2.1type fdu 48-500 20deinput 3 phase 380-480v, 432amp.make- c.g. drive & automation., power card of ac drive-emotron fdu 2.1type- fdu 48-142 20de, 126amp.make- c.g. drive & automation., cane carrier no. 1 & 2 acvfd panel, ac drive completemodel- acs 560-01-145a-4input- 3 phase, 380-480v ac current- 145/124, 50h3output- 3 phase 0-u2current- 145/124 amp. 0-50h3make- abb, control card for ac drive model- acs 560-01-145a-4make- abb, power card for ac drivemodel- acs 560-01-145a-4make- abb, cooling fan for ac drive model- acs 560-01-145a-4, 1750kg./ch. control panel, spare for ac drivemodel-acs 880-14-505a-3input- 3 phase- 400v ac, 401amp.output- 3 phase 0-u1, 505amp.make- abb, igbt- bgad-12c, gate drivr board bgdr-01c, i/0 board zbib-03, power supply board bfps-95c, charging control board qvar-5b2, power supply board zpow-7b1c, fan axial main fan, r2, fan axial acs 880 14/34 r11 pcb fan

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40474552

07 Jun, 2025 NA

Surat - Gujarat

Tender For contracts for the various works mentioned below are to be awarded after the completion of sugarcane crushing season of 2025-26. (1) for cane carrier work (2) for boiler house ash removal work (3) for bagasse moving work (4) for bagasse baling work (5) for sugar house work (6) for lime, sulfur & chemicals work (7) for sugar godown work (8) for pressmud/bio-compost manure preparation and prepared manure/pressumd conveying work (9) for spraying work of spent wash in bio-compost yard (10) for tube cleaning work of evaporator, pan and jewish heater.

Co-operative

CTN :40496941

03 Jun, 2025 2.00 Lacs

Bareilly - Uttar Pradesh

Tender For cane carrier pit cleaning work for the season 2025-26

Co-operative

CTN :40497463

02 Jun, 2025 NA

Mau - Uttar Pradesh

Tender For supply of the machinery items - list of machinery items, c.s. worm for crystallizer as per drg. no. ce-860722 for 40 ton capacity, c.s. worm for crystallizer as per drg. no. bh-040503 for 60 ton capacity, c.s. gear & pinion for baggase bailing machine (as per drg. no. b-031130 and b-061123), c.s. pinion for rbc (as per drg.) b-020809, c.s. gear for rbc (as per drg.) b-020809, complete pvc cluster with pipe & nozzle having 5 spray nozzle., c.s. idler pully for cane carrier (as per drg. no. k.s.c. mg-mh 13/87, c.i. adjusting coupling for hopper, rack for block type rack carrier, c.i. rotor for magma pump, c.i. pin bush type flexable coupling 300 mm, c.i. pin bush type flexable coupling 250 mm, c.i. pin bush type flexable coupling 200 mm, m.s. u camp for bucket of dry seed elevator (as per sample), c.s. drum coupling for cane unloader no.1 gear box (as per drg. no. mh-64/90), c.s. drum coupling for cane unloader gear box hoist(as per drg. no. mh-140616), c.s. wheel for bridge of cane unloader no-1 as per drg. no. mh-160625, c.s. gear of main hoist drum for cane unloader no-1 as per drg. no. mh-080731, c.s. pinion of hoist motar gear box cane unloader no-1 as per drg. no. mh 86/93, c.s. pinion for long bridge shaft for cane unloader no.3 of teeth 19 as per drg. no. mh 160719, spring for segment mud scrapper, c.s. pinion for 80 teeth gear of cane unloader as per drg. 86/93 (sample), worm wheel for u 500 r/g bax ratio 40:1 as per sample, worm shaft for u 500 r/g bax ratio 40:1 as per sample, m.s. static coller 32 mm thick(as per drg./ sample, c.i. perforated plate for boiler no. 1 & 2 grate bar as per drg./ sample, a.for new supply, b.on conversion, supply of planatory gear box for 40 t crystalizer, supply of planatory gear box for 60 t crystalizer, c.i. gate bar for 30 ton boiler as per drg. sample, c.s. warm & warm whell for crystalizer 40 ton capicity, c.s. warm & warm whell for crystalizer 60 ton capicity, c.i. side valve gate bar for boiler as per drg. sample, c.i. furnase gate bar for boiler as per drg. sample, a.for new supply, b.on conversion

Central Government And Public Sector

CTN :40351487

06 Jun, 2025 NA

Patna - Bihar

Tender For supply of chain and its spares on door delivery basis at hbl sugauli and lauriya plant - part-a-supply of chain and its spares for cane carrier, rake elevator as per below specification:, en-353 pin for cane carrier chain as per drg. no. kki/ccc/i-1/002-10 r4., en-353 bush for cane carrier chain as per drg. no. kki/ccc/i-1/002-10 r4., en-8 roller for cane carrier chain as per drg. no. kki/ccc/i-1/002-10/r4., slat for cane carrier, moc: steel gr a , is: 2062-2006, as per drg.no.js0004-05101059-183-002 rev.01, en-353 pin with 3 mm thk washer & m27 nylock nut for rake elevator chain as per drg.no.kki/bfc/i-1/003 r4

CTN :40337911

26 May, 2025 2.00 Lacs

Dharmapuri - Tamil Nadu

Tender For tender notice for purchase of cane carrier chain, spares and slat

CTN :40275939

17 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For purchase of cane carrier slat

CTN :40276036

17 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For purchase of cane carrier chain spares

CTN :40276080

17 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For purchase of wear pad for cane carrier slat

Hand Lorry Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Co-operative

Co-operative

Central Government And Public Sector