Latest hand press Tenders | Government hand press Tenders

CTN :45374531

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

State Government

CTN :45095884

15 Jun, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell

State Government

CTN :45313570

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :45291483

13 Jun, 2026 NA

Faridabad - Haryana

Tender For supply of drilling machine , lathe machine , pedastal grinder , fly hand press , cabinet oven

Central Government/Public Sector

CTN :45302355

05 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot miscellaneous scrap - cond used wooden and steel/ms furniture of sorts and sizes consisting of racks, cupboards, chairs, tee pot, tables and foam sofa, and any other similar woodenfurniture items, in broken and damaged condition with or without sunmica, foam, m.s. and nf attachmentnote. 1. hand pressing allowed for easy loading. 2 . dismantling is not allowed.note. the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot.location - a by 2 two stacks

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

CTN :45233277

08 Jun, 2026 NA

Doiwala - Uttarakhand

Tender For supply of spares and annual maintenance contract of bag stitching machine - spares for bag stitching machine model 80000 dx, needle g.b.250 (long size), needle bar guard, looper, looper thread cast of hook assembly, needle bar with nut, looper ball joint assembly, needle bar connecting link, feed bar, feed drive eccentric assembly, stitch regulating stud assembly, feed bar shaft, throat plate, bush set, threat tension assembly complete, feed dog, feed rocker assembly, screw set, feed lift eccentric fork, feed lift eccentric fork assembly, looper avoid eccentric assembly, needle bar connection, crank connecting rod, needle bar connecting assembly, needle bar clamp nut, looper shaft, looper rocker assembly, collar for feed rocker, pressure bar(left), pressure bar(right), pressure foot, guide fork, looper drive lever, shell for crank shaft, needle lever ball link, needle lever, looper drive connecting assembly, main crank shaft assembly, ball bearing for main crank shaft, needle thread guide, pressure bar spring, pressure bar link, pressure foot lifting lever with stud,hanger & spring, rocker for looper drive lever shaft, frame thread guide, needle lever shaft, looper drive lever shaft, pressure bar collar, driving pully for stitching head, bearing housing, bolt for driving pully, feed rocker shaft, pressure bar regulator, thread eylet, cover set(aluminium), looper stud complete holder, shaft for looper rocker stud, take up complete assembly, looper shaft fork, needle lever bolt, crank connecting rod with shell and needle lever ball link, ball looper carrier rod joint assembly, looper rocker holder, shaft for looper holder, shell assembly for rocker, feed lift came, feed lift u fork, connecting bearing, connecting assembly for chain outer drive, needle connecting rod, wood ruff key, connection assembly, needle holder, union elbow, stopper assembly, lubricator/oiler, thread cut off assembly, lever handle, pressure bar column, pressure bar holder complete with column, sleeve assembly complete, repairing/overhauling & amc for bag stitching machines during crushing season 2023-24, spares for bag stitching coveyor, chain slates, idler shaft with collar, teflone roller for chain slates, m.s rivit with split pin for nylone roller, split pin for conveyor chain, conveyor chain complete fitted with slates, driving chain for stitching conveyor, c.i. sprocket 7 teeth, m.s sprocket 16 teeth, m.s sprocket 20 teeth, m.s sprocket 28 teeth, end bracket shaft (front side), end bracket shaft (rear side), end bracket complete with sprocket,shaft & bearings, ball bearing for end bracket, idler, oil seal for gear box, adjusting spendle for end bracket, reduction gear box for stitching conveyor, slate screw with nylock nut, v belt a-35 for gear box, double action foot switch, foot switch element, conveyor chain (nacked) without slates

corporations/Associations/Others

CTN :45204446

03 Jun, 2026 4.80 Lacs

Churu - Rajasthan

Tender For supply of spare part for rsrtc vehicle sds depot - battery terminal [p] , battery terminal [n] , black paint , red oxide primer , synthetic thinner , po red paint , ase white paint , ms welding rod d400-1 ,350 , ms welding rod d315-l350 , drill bit 3.1mm 7/32,5/16 , rear view mirror big , bolt with nut bsf , 1*1*1/4" , bolt with nut bsf , 1.5*5/16" , bolt with nut bsf 1.5*1/2" , bolt with nut 3*1/4 , bolt with nut 4*3/8" , p.v.c. insulation tap roll , door lock [universal , type] , door handle [zink casted] , door lock [usha type] , pop rivet %*3/16 , steel screw 6*13mm , steel screw 8*19mm , small round tube patch , small ovel tube patch , medium oval tube patch , m.s.sheet 16 swg , m.s.sheet 18 swg , m.s.sheet 20 swg , m.s. angle iron 30*30*3 , electric welding holder , valve die len key type , tube valve core , hex-saw blade 12*1/2" , emery cloth , painting brush , battery lug , sulphuric acid 1840 , pvc pipe 1½" , omni tube , m-seal/aro-dit , old saree cotton , fan belt [air , comp.&car washer] , spring washer ½" , spring washer 3/8" , hose clip 14mm , spandle catter pin , ms flate iron asst. size , grinder stone rough , flate washer [asst.type] , tower bolt 6" , ox-ford blue paint , golden yallow , silicon tube , pottine , pottine pattine , ms steel scrow , 12no.x1" , ms steel scrow , 8no.x1/4" , brake oil , omni tube patch 3 no , omni tube patch 4 no , omni tube patch 5no , welding glass black , welding glass white , nozzle , hand pressure guase , solution rubber black , bostic compound , thinner deco , phiroza blue paint , l. t. wire 4mm , l.t.wire 6mm , l.t.wire 8mm , welding cabal , grinder iron cutting blade , hammer broken glass , emg. windo glass w. rubber , stepler pin big , hand opd. grease gun pipe

Central Government/Public Sector

CTN :45197749

04 Jun, 2026 NA

Koraput - Odisha

Tender For tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

Hand Press Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector