Tender For labour charge for removal/transportation of silt, mud and water algae from cooling tower, cw pump house, clarifier & miscellaneous sump unit # 6 at utps. (civil ph)
Tender For corrigendum : repair/maint of external water supply ci/di , gi pipe line cleaning of oht , ug sump, maint of vt/submersible pump and repair/maint of irp , sewage installation and allied works of power house no 1 area at pms
Tender For corrigendum : repair/maint of external water supply ci/di , gi pipe line cleaning of oht , ug sump, maint of vt/submersible pump and repair/maint of irp , sewage installation and allied works of power house no 2 area at pms
Tender For providing of custom bid for services - work/consultancy services required for soil investigation for provision of sump and pump room alongwith
Tender For tn-25151 supply of miscellaneous rubber items at kstps, kota. - "white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubber free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area", 3.0 mm , 5.0 mm, love-joy spider set in following sizes:, l-50, l-70, l-75, l-90, l- 95, l- 100, l - 110, l - 150, l-190, l-99/100, l-225, l-226, l-276, soft seal for 600 nb b/f valve make-m/s i/l ltd. od-577, id-522 mm.pcd-548 mm. hole dia 9 mm. no. of hole-20 th-10.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , nitrile rubber gasket for 300 nbci/ ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5 mm. , nitrile rubber gasket for 150 nb wet slurry line single side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm. , rubber coupling bush for sump drain pump id=22 mm, od=38, l=40 mm, rubber pad for love joy coupling c-280 , victaulic coupling rubber gasket -18l, victaulic coupling rubber gasket -18h, "victaulic coupling rubber gasket -20l", victaulic coupling rubber gasket -20h, seal kit set 3/8" 3way solenoid valves as per sample one set contains 6 pieces, vibration damping rubber pads/block for stacker reclaimer#1 size od=210 to 200(tapper).length=125 mm centre hole dia.=85 mm (sample piece available at site), neoprene rubber coupling pad size 40x40x20 mm, neoprene rubber brush size (idxodxlength ), 20x38x40, 32x50x55, 35x55x60, rubber cushion pad c-280, tyre coupling tc-011, tyre coupling tc-019, tyre coupling tc-013, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x2.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x4.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x6.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x8.00 mm, dresser coupling rubber gasket for16'' for feed pipe, dresser coupling rubber gasket for36'' for coal valve gate raw coal feeder, gun metal rubber bush for feeder drive nitrile rubber gun metal bush id 22.5mm ,od 32mm,length 40 mm rubber bush od 44.5 mm ,length 40 mm, rock well coupling gasket 20l, enddoor gasket for stg-i (1 set consisting 2 nos. rare and 2 nos.front ), enddoor gasket for stg.-ii,iii,iv,v consisting (2 nos. rare and 2 nos.front ), rubber spider set :, sw-rrs 190/140, sw-190, rubber coupling bush for fd/pa fans of stage-i as per drawing , rubber coupling bush for fd/pa fans of stg-ii as drawing, rubber coupling bush for fd/pa fans of stg- iv/v as drawing, rubber gromet gasket for id/pa fans as per drawing u#3 to 7, victaulic coupling rubber gasket size 22l made of silicon rubber for pf pipe of u#5, 6&7. tech. specs: max. temp. 160-180 degree. a industrial grade scale, soft seal for 400 nb b/f valve make-m/s i/l ltd. od-357, id-307 mm. pcd-323 mm. hole dia 8 mm. no. of hole-16 th-9.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , rubber pad for love joy coupling swq-280/140
Tender For corrigendum : construction of pump house and control room, construction of sump well, lining of sirhind canal and neelon drain, construction of protection works at outfall of riser main, and joining of np3 700 mm dia pipe with sump well for construction of surface - construction of pump house and control room, construction of sump well, lining of sirhind canal and neelon drain, construction of protection works at outfall of riser main, and joining of np3 700 mm dia pipe with sump well for construction of surface pumps for lifting water from sirhind canal at rd 145700/r into neelon drain ( civil work )
Tender For purchase of lab equipments for ice dept - purchase of lab equipments for ice dept, i/p and p/i converter (iemcode:g002) i/p converter:(4 20) ma to (3 15) psi conversion. p/i converter:(3 15) psi to (4 20) ma conversion. air filter regulator (afr):20 psi regulated air supply. built-in current source. 3 digit led display for process indication. power supply: 230 v ac, 50 hz. mounting:bench-top / panel-mounted trainer configuration., level measurement using float and sight glass indicator- itemcode: g005specifications: sight glass level indicator. float type level indicator. power supply:230 v ac, 50 hz. monoblock pump:0.5 hp / 1 hp. sump tank., 8051develop ment board with usb/rs 232 cable to connect with computer (item code: g008)specifications: communication interface:usb / rs-232. on-board facilities:8 output leds,8 input switches,ldr,reed switch,8-bit adc,8-bit dac. display interfaces:seven-segment display,16 2 lcd interface. motor interfacing:stepper motor with driver,dc motor with h-bridge driver, 8 bit adc/dac interface board (item code: g009)specifications: thermistor / lm35 input in one channel. variable input (0 5) v in another channel. 8 leds for digital output indication.. necessary control signals provided for adc0809. 8-bit dac using dac0808. 8-bit digital input from controller. single-channel dac output:(0 10) v. power supply: 12 v or 15 v for analog circuitry, water level measurement trainer kit using capacitive type transducer (item code: g020) tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20) ma and/or (0 5) v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement., flow measurement using electromagn etic flow meter(item code: g021)specifications: medium: water (salt water / bore well water). electromagnetic flow measurement: instantaneous flow rate and totalized flow indication. electromagnetic flow meter: integral mounted type. power supply: 90 260 v ac, 50 hz. minimum media conductivity: 15 s/cm. flow rate unit: m /hr. operating pressure: up to 10 kg/cm . electrode material: ss-304 / ss-316 / ss 316l. lining material: ptfe / neoprene / hard rubber / pfa. line size: 15 nb 25 nb. flow range: 0.1 10 m /hr. connection type: flanged. display: digital indication for flow rate and totalized flow. water pump: submersible type, 230 v ac, 50 hz. water tank: approximately 20 25 liters capacity. flow control valve provided. drain valve and overflow arrangement provided. mounted on powder-coated ms frame suitable for laboratory use.