Latest hand pump spares Tenders | Government hand pump spares Tenders

CTN :45372848

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of spare parts of kirloskar make hscf pump, model dsm-100/36. one set consisting of (i) impeller driving end (cast iron)-01 no. (ii)impeller non driving end (cast iron)-01 no. (iii) shaft (c 40) stainless steel with 02 nos. suitable size of shaft key -01 no. (iv) wear ring (cast iron)-02 nos. (v) inter stage ring (cast iron)-01 no. (vi) bearing cartridge driving end (cast iron)-01 no. (vii) bearing cartridge non driving end (cast iron)-01 no. (viii) bearing cover driving end (cast iron)-01 no. (ix) bearing cover non driving end (cast iron)-01 no. (x) sleeve (cast iron)-02 nos. (xi) sleeve check nut (lt bronze)-04 nos. (xii) bearing check nut (cast iron)-01 no. make- kirloskar & model dsm-100/36. [ warranty period: 30 months after the date of delivery ]]

CTN :45338341

17 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply. installation, testing and commissioning of 75 hp hscf pump motor set having capacity of 50000 gph/ 227 rn3/hr with 50 mtrs. head as per attached annexure -a, with control panel consist of suitable so ft starter including spares and accessories following all the clauses as mentioned in pcee/ser's specification no.- cee/s/185/hscf pump/ 9/98/revised july 2022 (copy attached) cost includes all the allied ancillary civil and electrical works for foundation and successful completion of electrical installation, commissioning & testing. [ warranty period: 30 months after the date of delivery ] ]

CTN :45337768

11 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of pump shaft of material carbon steel (part no-180) for 100000 gph hscf pump(kirloskar) , model no-dsm 150/46 [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

CTN :45117885

28 May, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of squirrel cage induction motor,power rating: 30 hp (22 kw), poles: 4 pole, speed: -1440?1500 rpm at 50 hz, voltage: 415 v ?10%, frequency: 50 hz, phase: 3 phase, duty: continuous (s1 duty), efficiency class: minimum ie3 or above as per 60034-30-1:2014, & is-12615:2018, enclosure: tefc (totally enclosed fan cooled), mounting: foot mounted (b3) / as required, insulation class/thermal calss: f/b, protection: ip65 or better, frame: km180l, product code:km2.22t0.bmc.b03.tss with tyre coupling pulley set & base frame for pump horizontal split case bare pump model- 5wlr12a of capacity 60,000 gph (227,000 lph),delivery head: 22 mtr, suction size is 150mm i.e. 6 inch & delivery size is 125 mm i.e. 5 inch, eff-83%, bkw- 16.55 kw of make kirloskar or equivalent as per cege spec : cee/s/185/hscf pump/9/98/rev july 2022. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45221809

30 May, 2026 52.26 Lacs

Kutch - Gujarat

Tender For supply, installation, testing & commissioning of hscf pump-sets along with all electro-mechanicalaccessories including construction of positive suction pump house at ravapar shw site, taluka :lakhpat for lakhpat rwss in kutch district

CTN :45195340

08 Jun, 2026 NA

Jamshedpur - Jharkhand

Tender For supply, erection, testing and commissioning of 227 m3/ hr. 50000 gph (uk) capacity hscf pump set, total head 50 mtr, with 75hp motor 4p/tefc/ie3 horizontal foot mounted type with rating 415v, 50hz, 3 phase along with soft starter panel (with copper bus bar), pump set specifications shall conform to pcee/grc's latest specification and as per annexure a (item 1 to 8). the cost is inclusive of dismantling, making concrete foundation work, supply of suitable size foundation bolts and all requisite materials. spares &accessories of pump set to be supplied with each set as per clause no. 3 & 4 of pcee/grc%u2019s specification no. cee/s/185/hscf pump/9/98/revised july 2022. [ warranty period: 30 months after the date of delivery ] ]

CTN :45194784

21 May, 2026 NA

Adra - West Bengal

Tender For supply of en-8 sleeve with o -ring for 250 hp hscf pump [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45193360

21 May, 2026 86.47 Lacs

Panchmahal - Gujarat

Tender For repairing of india mark-ii hand pump installed at various villages with providing of manpower, light / medium four-wheeler commercial vehicle with diver, pol, insurance, fitness certificate, puc etc. including supply of hand pump spares as per is 15500 with latest amendment and 32 mm nb isi marked medium duty gi pipe in ta. morava (h) and shahera of panchmahal district for one year

State Government

CTN :45163812

28 May, 2026 16.76 Crore

Raipur - Chhattisgarh

Tender For design, drawing, construction, testing, commissioning of floating pontoon of size 5x3 mtr at jhumka dam, raw water electric sub station100 kva/11/0.415 kv with all required work,raw water hscf pump sets 2 no of 10hphaving discharge - 97656 lph and against 20.0m head at floating pontoon station site, 2.0 mld conventional type water treatment plant, clear water centrifugal pump set 03 nos of 30hp having discharge 93750 lph against 101m head, clear water electric sub station 100 kva/11/0.415kv with all required work at wtp site, 120 kl capacity 30m staging mbr-1 no at village salka,100 kl capacity 16m staging mbr-2 no at village salka, providing, laying, jointing and testing & commissioning of raw water pumping main di k-9 pipe 250 mm dia- 200m and clear water pumping main 150 mm dia di k-9 pipe-3820 m,di k-9 pipe200mm dia-1210 m ,total length-5030 m& clear water gravity mains di k-7 pipe 300 mm dia l= 6128m.& o-pvc pipe pn-16, 160mm dia – 5423m. 250 mm dia –7487m, 110mm dia – 31711 m. total length- 50749 m with all required valves &specials,as per attached key plan map, providing and fixing bulk flow meters, nala crossing and work include taking permission to pwd, wrd deptt. etc. allied all civil works including boundary wall around wtp campus. work completion is 12 months including rainy season integrationof all component, comprises of three month testing & 09 month trial run of entire scheme (with defect liability period of one year). (on risk and cost basis)group water supply scheme narkeliblock- baikunthpurdistrict –korea

Hand Pump Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government