Latest hand trowel Tenders | Government hand trowel Tenders

Central Government/Public Sector

CTN :45361492

03 Jul, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology e - inspection fixture , inspection fixture , flow checking fixture , inspection fixture , inspection fixture , inspection fixture , axial play centring , locating fixture , caliberation tool , adaptation for removal , inspection tool , handling tool , adaptation for removal , assembly fixture , inspection fixture , inspection fixture , inspection fixture , inspection fixture , assembly fixture , assembly tool , crimping tool , assembly tool , assembly tool , inspection fixture , inspection fixture , checking fixture , checking fixture , inspection fixture , inspection fixture , engine trolley , set up rod , flow direction check fixture , inspection fixture , sludge remover , adaptor , draw tool , riveting fixture , riveting fixture , immobilizer , immobilizer , special wrench , extractor , extractor , bearing extractor , bearing extractor , bearing extractor , bearing extractor , bearing extractor , bearing extractor , bearing extractor

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Central Government/Public Sector

CTN :45197749

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

Central Government/Public Sector

CTN :45178202

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

CTN :45642706

13 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of plant cutter or trimmer , hand trowel or khurpi , tree branch cutter , plant watering can , spade with handle , gainti with handle , iron crowbar , shovel or belcha , fork or panja with handle , heavyduty cleaning shovel , cement flower pots , plastic flower pots

Central Government/Public Sector

CTN :45617094

10 Jul, 2026 NA

Koraput - Odisha

Tender For tender for supply of tools as per drawings provided by hal - errection support , balancing assembly , plate cutting tool , impeller centering tool , handling tool , maintenance tool , tightening tool , support assy

CTN :45388695

15 Jun, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of cups saucers tea set , non carbonated beverage dispenser , glass coaster , toilet cleaner , mosquito repellent spray , air freshener solid , air freshener , air freshener automatic , induction heater , damask cloth , glass cleaner , toilet brush , water jug , cotton towels , naphthalene balls , writing pens 0.7mm , writing pens , decoretive flg , heated display case , electric kettles , envelope yellow 12 x 10 inch , envelope yellow 16 x 12 inch , envelope yellow 16 x 06 inch , bond paper , glass tumbler , curtain , all out machine with refil , phenyel white , nylon grass cuter trimmer line 3.5mmx 50 mtr , file binder , mopper , poker wooden handle , serving tray , adhesive tape transparent 1 inch , adhesive tape transparent 2 inch , adhesive tape brown 2 inch , adhesive tape green 0.5 inch , soft bristle , calculator bis size , fevicol , hand wash , glue stick , coconut broom , duster cloth , floor duster , binder clip 19mm , sponge dumper , hand knotted silk carpet , tag white , tags for files , binder clip 41mm , cd dvd writer , punching machine single hole , self adhesive flags , correction fluid pen , wheeled dustbin , register cover , white board , first aid box , prong hoe 12 inch with handle , trowel scope , snake bite kit , attendance register , complaint slip , file cover , occupation vacation return form , car diary , mileage card , cash book , log book for vehicle , log sheet for pump motor , electric shock treatment chart , home aplliances dos donts poster , sock treatment poster , electric safety poster , fire prevention chart , no admission except on duty chart , portable fire extinguishers (v3) isi marked to is 15683 (q2)

CTN :45466136

15 Jun, 2026 10.00 Lacs

Pali - Rajasthan

Tender For supply of iron and other material-pickaxe handle (standard size, as per sample); mattock handle (standard size, as per sample); iron *panjitiya* (rake/claw tool); bent *pavdi* (spade/shovel) (4" x 6"); plastic *tagari* (pan/tub) (as per sample); iron *khurpi* (hand trowel) with wooden handle; large garden shears with wooden handle; odonil; jute rope (25 mm); plastic rope (22 mm); bamboo supply (1.5-inch diameter, 15-foot length); large bamboo broom (8-foot length, including wooden handle); iron sign board (2.5' x 3' frame, 8' height, municipal corporation property); radium jacket (as per sample); raincoat (as per sample); acid (1-liter bottle); flexible garden rubber hose (0.75 inch); dustbin stand/frame with fixing arrangement; glass water bottle (1 liter); phenyl (1-liter bottle); hand wash (200 ml). toilet cleaning brush; camphor balls (100g pack); full-size broom; flexible folding agricultural pipe (3-inch, 4-inch, and 6-inch); flexible garden rubber pipe (1-inch); hose pipe (6-inch and 4-inch); iron hose collar (6-inch); foot valve (4/6-inch, iron and plastic); hose clip (6-inch); sheetla saptami fair flag with pole; memento/souvenir (wooden frame with lighting); memento/souvenir (premium metal frame with wooden/glass box); customized printed acrylic shield.

Hand Trowel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector