Latest handling contactor Tenders | Government handling contactor Tenders

Central Government/Public Sector

CTN :45374534

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler- ac coach with all available ferrous-non ferrous-wooden fittings thereon but excluding the following reclaimable items-mechanical rc items:1)buffer plunger with buffer pads and buffer causins,2)bio-toilet complete set.3)distributor valve complete. electrical items: 1)all type of batteries,2)rmpu unit if,3)regulator,4)ac control panel if. coach number- 1) special repair ce 79890,2) special repair re 94152= 2 coaches, pl.no. 98111061, ds8 no: 232841 (101021 &101017 ) dt.20.04.2024. location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,2) all rc items should be handed over to custodian at respective locations,3) screw couplings to be defaced before delivery. rate per number should be quoted,4)coaches are in grounded condition (bogies and wheel sets removed ). 5) ac coaches converted into inspection car & mobile training car and compartments & berths were removed, 6) coach no.sr re 94152 = ac units removed. . 7)rate per number should be quoted, 8)cutting permitted to loadable sizes only, 9) crane/jcb loading is permitted. (10) purchaser should take safety precaution while cutting/delivery of coaches.

Central Government/Public Sector

CTN :45374536

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non -ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) centre buffer coupler complete set including knuckle, knuckle pin, yoke, yoke pin , draft gear, 2) aluminium water tanks. coach nos- 1) special repair wgscn 066234, 2) special repair wgscn 051116, 3) special repair wgscn 066277, 4) special repair gslrd 066719, 5) special repair wgscn 056270= 5 coaches, ds8 no: 023280-25-21325 dt 24.03.2026 (232888 dt 24.03.2026), pl.no. 98111061, location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government , 2) all rc items should be handed over to custodian at respective locations, 3)rate per number should be quoted.4)coaches are in grounded condition (bogies and wheel sets removed ).5) bio toilets should be defaced before delivery. 6)cutting permitted to loadable sizes only. 7) crane loading may be permitted. 8) purchaser should take safety precaution while cutting/delivery of coaches.

Central Government/Public Sector

CTN :45374537

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) centre buffer coupler complete set including knuckle, knuckle pin, yoke, yoke pin & draft gear, 2) aluminium water tanks . coach nos.- 1) special repair wgscn 056228, 2) special repair wgscn 046310 ,3) special repair gs 046435 = 3coaches, ds8 no: 023280-26-22488 dt 13.04.2026 (232801 dt 13.04.2026), pl.no. 98111061 location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government , 2) all rc items should be handed over to custodian at respective locations, 3)rate per number should be quoted.4)coaches are in grounded condition (bogies and wheel sets removed ).5) bio toilets should be defaced before delivery. 6)cutting permitted to loadable sizes only. 7) crane loading may be permitted. 8) purchaser should take safety precaution while cutting/delivery of coaches.

CTN :45365475

12 Jun, 2026 2.90 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lab equipments for eee dept. - list of items:supply of lab equipments(for specification details refer notice inviting tender), three phase auto transformer (detailed specification enclosed), three phase synchronous motor with electrical workbench and mechanical loading arrangement (detailed specification enclosed), transformer oil bdv test kit (detailed specification enclosed), acidity test kit (detailed specification enclosed), loading rheostat 3 phase (detailed specification enclosed), loading rheostat 1 phase (detailed specification enclosed), synchronizing panel (detailed specification enclosed), three phase capacitor bank (detailed specification enclosed)

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45346460

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of eee lab items dept use - three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory usebench/floor mounted suitable for laboratory operation all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , dc stepper motor driver kit with stepper motorinput supply : 230 v ac, 50 hz stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection. , dc servo motor driver kit with servo motorinput voltage 12 - 24v, dc, 5a, 10-60rpminput supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided , three phase resistive loadrating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , single phase induction motor with load arrangement 5hp ,230v, 1400 rpmsingle phase, 2hp,230v,1440 rpm with dol starter loading arrangement and electrical workbench mechanical rope with aluminum brake drum loading with adjustable wheels - 2 no s 0-50 kg spring balance - 2 no s electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor and starter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeter , three phase synchronous motor with electrical workbench 3-phase synchronous motor with electrical workbench and loading arrangement , rating: 5 hp voltage: 440 v ac, 50 hz speed: 1500 rpm (synchronous speed), induction start using damper winding, suitable starter panel, dc supply (0 220 v dc adjustable (variable dc control) within the panel),and necessary workbench electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor , starter, exciter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeters and voltmeters for motor to be provided on panel board. , synchronizing panelthree phase, 415v, 15a synchronizi

Central Government/Public Sector

CTN :45348018

06 Jun, 2026 NA

Chhindwara - Madhya Pradesh

Tender For providing of custom bid for services - mechanical transportation of mine extraneous material rock stone from palachourai siding to coal stock yard of sharda ug mine including loading transporting and unloading at material for making hard ground over coal stock y..

Central Government/Public Sector

CTN :45343077

05 Jun, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of others - scrap cond. unserviceable icf 13t and 16t trolley complete with coil spring, bolster spring, brake beam, hanger, brake shoes and all trolley fittings items etc. restricted items: 1. wheel set with axle and axle box cover complete =72 sets. 2. alternator of 16t trolley =06 nos. and 13t trolley = nil. 3. bmbc of 13t trolley = 20 nos and 16t trolley = 52 nos. 4. centre pivot=02 nos. remark: 1. all the above trolleys are marked with sr. no. 1 to 36. 2. trolleys are lying at tws 1 and ktc-4,6,8 line at cla cutting yard. 3. cutting to be allowed for easy loading at the same place. 4. purchaser should see the lot personally in regard to location, loading point and content be for bidding, no claim will be entertained after the sale of lot. 5. mechanical r-items - wheel sets after cutting to be pushed at kyn end by manual labours and handed over to sse/c&w/ltt at same place. 6. bmbc and centre pivot are mechanical restricted item to be handed over to sse/c&w/ltt and alternator of electrical restricted item to be handed over to sse/etl/ltt at sick line roh by the purchaser. 7. lot is ok for sale on ¿as is where is basis¿ and number basis. location : tws 1 and ktc-4,6,8 line at cla cutting yard. stock holder : sse/c&w/ltt.

Central Government/Public Sector

CTN :45343194

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler- ac coach with all available ferrous-non ferrous-wooden fittings thereon excluding rc items . mechanical rc items: 1) complete bogie and bolster assembly with all available fittings including brake gear items, 2) wheel set complete with axle,axle box and roller bearing assembly with pulley, 3) buffer plunger with buffer pads and buffer casings, 4)brass wearing piece and plate, 5)bio toilet complete set, 6)aluminium water tanks-if any, 7)distributor valve, 8) brake cylinders. electrical items: 1) alternator, 2) bldc fan, 3) vrla batteries .coach numbers- 1) special repair wgaccn 01914 = 1 coach,pl.no. 98111061 ds8 no: 232833 dt 21.06.2023 , location: tnpm marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2)rate per number should be quoted,3)coach is in grounded condition . 4) screw coupling to be defaced before final delivery. 5)coach is in grounded condition (bogies and wheel sets are in removed condition).6) ac components, batteries, bio toilets are in removed condition. 7) remaining coach in ds8 already sold. 8) purchaser should take safety precaution while cutting/delivery of coache. 9) cutting permitted to loadable sizes only. 10) crane loading may be permitted.

Central Government/Public Sector

CTN :45343195

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) centre buffer coupler complete set including knuckle, knuckle pin, yoke, yoke pin & draft gear, 2) aluminium water tanks . coach nos.- 1) special repair wgscn 066226, 2) special repair gs 056422 ,3) special repair wgscn 056265 = 3coaches, ds8 no: 023280-25-21327 dt 24.03.2026 (232890 dt 24.03.2026),pl.no. 98111061, location: tnpm marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,2) bio toilet to be defaced before delivery. 3)rate per number should be quoted,4)coaches are in grounded condition (bogies and wheel sets removed ).5) all rc items should be handed over to custodian at respective locations. 6)cutting permitted to loadable sizes only, 7) crane/jcb loading is permitted. (8) purchaser should take safety precaution while cutting/delivery of coach.

Handling Contactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector