Latest handling Tenders | Government handling Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

State Government

CTN :44897475

06 May, 2026 NA

Thanesar - Haryana

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; tractor,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; jcb,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; mobile crane

Central Government/Public Sector

CTN :44887349

05 May, 2026 NA

Multi City - Multi State

Tender For augmentation of fire fighting facility at ntb jetty on turnkey basis for handling pol

Central Government / Public Sector

CTN :44707468

21 Apr, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of mitsubishi make gt spares - list of item(s) / work(s) as per tender documents, fuel nozzle,p/n gfnoz-1, heli coil,p/n-310qc67-724-4, 12 point bolt,p/n-5,dwg-310qc67-724, support,p/n-310qc67-724-8, seal,p/n:9,dwg-310qc67-724, hex.head bolt,p/n:10, dwg-310qc67-724, hex.head bolt,p/n:11,dwg-310qc67-724, hex.head bolt,p/n-310qc67-724-12, u-nut,p/n-13,dwg-310qc67-724, cover spacer,p/n:14,dwg-310qc67-724, bolt,p/n-36,dwg310qc64-292, washer,p/n:37,dwg:310qc64-292, pin,p/n:45,dwg:310qc64-292, combustion liner,p/n 4, drg 310qc54-600, adapter,p/n 5, drg 310qc54-600, gland,p/n 6, drg 310qc54-600, cross fire tube,p/n 8, drg 310qc54-600, cross fire tube,p/n 9, drg 310qc54-600, vortex gasket,p/n 16, drg 310qc54-600, vortex gasket,p/n 17, drg 310qc54-600, metal jackt gasket,p/n20,drg 310qc54-600, metal jackt gasket,p/n21,drg 310qc54-600, ring packing,dwg:310qc56-101,p/n:22, hex. head bolt,p/n 23, drg 310qc54-600, transition piece p/n-1,dwg. 310qc32-464, clamp p/n-2,dwg. no. 310qc32-464, shim(1.0t),p/n:3,dwg:310qc32-464, shim(1.5t),p/n:3,dwg:310qc32-464, side seal,p/n:4,dwg:310qc32-464, stopper,p/n:5,dwg:310qc32-464, stopper,p/n:6,dwg:310qc32-464, guide pin,p/n:8,dwg:310qc32-464, hex. head bolt,p/n:13,dwg:310qc32-464, hex. head bolt,p/n:14,dwg:310qc32-464, hex. head bolt,p/n:15,dwg:310qc32-464, lock plate,p/n:16,dwg:310qc32-464, lock plate,p/n:17,dwg:310qc32-464, lock plate,p/n:18,dwg:310qc32-464, lock plate,p/n:19,dwg:310qc32-464, heli coil,p/n:20,dwg:310qc32-464, heli coil,p/n:21,dwg:310qc32-464, heli coil,p/n:22,dwg:310qc32-464, 1st stage shroud p/n-7,dwg. 310pb44-454, 2nd stage shroud,p/n:8,dwg:310pb44-454, 3rd stage shroud,p/n-310pb44-454-9, lock pin,p/n:45,dwg:310pb44-454, lock pin,p/n:63,dwg:310pb44-454, heli coil,p/n:2,dwg:310pb44-454, guide dwg-310pb44-454 p/n:3, hex. head bolt dwg-310pb44-454 p/n:4, lock washer dwg-310pb44-454 p/n:5, lock washer dwg-310pb44-454 p/n:6, plug,p/n:38,dwg:310pb44-454, plug dwg-310pb44-454 p/n:39, plug,p/n:40,dwg:310pb44-454, plug rod,p/n:42,dwg:310pb44-454, plug plug dwg-310pb44-454 p/n:43, plug rod,p/n:44,dwg:310pb44-454, 12 point bolt,p/n:50,dwg:310pb44-454, 12 point nut,p/n:51,dwg:310pb44-454, reamer bolt,p/n:52,dwg:310pb44-454, reamer bolt,p/n:53,dwg:310pb44-454, stud bolt,p/n:54,dwg:310pb44-454, stud bolt,p/n:55,dwg:310pb44-454, plug,p/n:56,dwg:310pb44-454, coil spring,p/n:57,dwg:310pb44-454, plug,p/n:58,dwg:310pb44-454, plug rod,p/n:59,dwg:310pb44-454, plug rod,p/n-60,dwg-310pb44-454, hex. head bolt,p/n:64,dwg:310pb44-454, 12 point bolt,p/n:65,dwg:310pb44-454, 12 point nut,p/n:66,dwg:310pb44-454, 12 point bolt,p/n:67,dwg:310pb44-454, heli coil,p/n:68,dwg:310pb44-454, heli coil p/n-72,dwg. no. 310pb44-454, heli coil,p/n:73,dwg:310pb44-454, reamer bolt,p/n:8,dwg:310pb44-455, 12 point bolt,p/n:10,dwg:310pb44-455, self lock nut,p/n:16,dwg:310pb44-455, washer,p/n:23,dwg:310pb44-455, 12 point bolt,p/n:24,dwg:310pb44-455, packing,p/n:26,dwg:310pb44-455, packing,p/n:27,dwg:310pb44-455, lock washer,p/n:32,dwg:310pb44-455, lock washer,p/n 33,dwg 310pb44-455, lock washer,p/n:34,dwg:310pb44-455, hex. head bolt,p/n:36,dwg:310pb44-455, heli coil,p/n:38,dwg:310pb44-455, heli coil,p/n:40,dwg:310pb44-455, nut,p/n-a,310rb77-727, cap nut,p/n-b,310rb77-727, baffle,p/n-310pb44-455-6, baffle,p/n-310pb44-455-7, no.2 brng liner,p/n:2,dwg:310pb44-453, oil seal,p/n:3,dwg:310pb44-453, oil seal,p/n:4,dwg:310pb44-453, oil deflector,p/n:5,dwg:310pb44-453, shim,p/n:34,dwg:310pb44-453, shim,p/n:35,dwg:310pb44-453, reamer bolt,p/n:7,dwg:310pb44-453, 12 point nut,p/n:8,dwg:310pb44-453, 12 point bolt,p/n:9,dwg:310pb44-453, reamer bolt,p/n:10,dwg:310pb44-453, 12 point nut,p/n:11,dwg:310pb44-453, 12 point bolt,p/n:12,dwg:310pb44-453, 12 point bolt,p/n:13,dwg:310pb44-453, 12 point bolt,p/n:14,dwg:310pb44-453, 12 point bolt,p/n:15,dwg:310pb44-453, 12 point bolt,p/n:16,dwg:310pb44-453, pin,p/n:17,dwg:310pb44-453, pin,p/n:18,dwg:310pb44-453, pin,p/n:19,dwg:310pb44-453, plug,p/n-310pb44-453-24, plug,p/n-310pb44

Central Government/Public Sector

CTN :44889020

30 May, 2026 NA

Delhi - Delhi

Tender For comprehensive maintenance, routine support, bug resolutions, issue handling, enhancements, and handholding of microsoft dynamics 365 business central at indian red cross society (ircs), nhq

Central Government/Public Sector

CTN :44892706

20 Apr, 2026 NA

Raigad - Maharashtra

Tender For pmc services from ipa empaneled consultants for handling prebid queriers,submission of bid evaluation report and finalization of successful bidder and pmc for infrastructure development work of cfs (repairs,resurfacing and electrical works) at jnpa

corporations/Associations/Others

CTN :44896458

30 Apr, 2026 NA

Shahdol - Madhya Pradesh

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; jcb

Central Government/Public Sector

CTN :44899989

16 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of set of aluminium items for lhb ac ra coach., as per drawing: mplalacra version 0, packing instruction: all types of aluminium/stainless steel mouldings/extrusion: biodegradable self adhesive plastic lamination sheet to be provided on each piece , then to be packed in gunny bags,followed by packing in wooden crates made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm .on the wooden crate base 3 wooden pegs of size100x100mm(along the length) to be provided for ease in handling with fork lifter. net weight of the material & gross weight with the packing to be indicated on each packing. gross weight must not exceed 200 kg. of each box. a list should be pasted on each crate showing order no,pl no, description of item,drg no/spec no/set list no with version,qty,firm's name & address,date of despatch etc. [warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44902039

30 Apr, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of multi bay 2 tire casnub bogie wheel sets store and handling system for handling about 150 wheelsets [ warranty period: 12 months after the date of delivery ]

State Government

CTN :44883591

05 May, 2026 NA

Kheda - Gujarat

Tender For providing of operation and maintenance power house / power plant - annual rate contractor for comprehensive cleaning and housekeeping services for coal handling plant (chp) unit 8 at 1x800 mw of wanakbori thermal power station

Handling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors