Latest hanger building Tenders | Government hanger building Tenders

CTN :41090522

24 Jul, 2025 6.98 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for rennovation of public drinking water open well near govt dhoni nala at telsang villege of athani taluk - providing and fixing m.s. gate as per chief architect drawing, using 50mm x 50mm 14 guage m.s.hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm squarerods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm m.s. flats for horizontal member andat the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc., complete. all thesteel surface should be thoroughly cleaned free of rust etc, providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangularpoles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottomas required including cost of all materials, labour, lead and lifts and as per the directions of the engineer-in-charge ofwork including two coats of approved quality paint over one coat of shop paint, supplying and fixing m.s. rectangular poles made out of 2 equal angles of 65x65x6 mm weldedtogether and fixed in cc with 2 nos 16mm dia m.s. hold fast rods each of length 25 cms. including cost ofall materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts andas per the directions of the engineer-in - charge of the work and including providing 2 coats of approved quality paintover one coat of shop painting etc, fabricating, supplying and erecting m.s. tubulartruss of all span with prefabricated steel applicationsusing quality material and are durable reliable and corrosion abbrasion resistant. welding shall conform to lateststructural welding code. quality shall be on various parameters like shape , size, design guage and polish. the entiretruss is achored in rcc cloumn by using four numbers of achor bolts at each support with 10 mm thick base plateand shoe plate. the work includes cutting , etc, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn2 coarse sand (zone iii), atn12 centering, shuttering, strutting, propping etc, atn11 binding wire, atn10 tmt bars fe 500

CTN :41091157

31 Jul, 2025 7.36 Lacs

Ranebennur - Karnataka

Tender For supply of for material for nrlm shed work site at karur gp under mgnrega scheme - tmt bars fe 500_ nrlm work site at karur gp, portland cement_ nrlm work site at karur gp, ceramic tiles 30 x 30 cms_ nrlm work site at karur gp, reeded glass 3 mm thick_ nrlm work site at karur gp, vitrified tiles 600x600 mm_ nrlm work site at karur gp, white cement_ nrlm work site at karur gp, cast iron spike_ nrlm work site at karur gp, anchor bolts 750mm_ nrlm work site at karur gp, solid concrete blocks 40 20 20 cms 5 n sqmm_ nrlm work site at karur gp, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia_ nrlm work site at karur gp, pvc pipes 10kgf / sqcm 90mm outer dia_ nrlm work site at karur gp, teak wood beading 20 x 20 mm_ nrlm work site at karur gp, casurina poles 100 - 150 mm_ nrlm work site at karur gp, tools and plants at 2% on material_ nrlm work site at karur gp, tools & plants and electrical charges at 2%_ nrlm work site at karur gp, add brush at 1% on cost of paint_ nrlm work site at karur gp, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint_ nrlm work site at karur gp, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material_ nrlm work site at karur gp, add cement sand and grit 1% on material_ nrlm work site at karur gp, add 5% for fittings and wastage charges_ nrlm work site at karur gp, handling loading and unloading 3% on material_ nrlm work site at karur gp, labour charges for lifting and placing in position and making connection at 7% on material_ nrlm work site at karur gp, add brush, putty, sand paper, roller at 5% on cost of paint_ nrlm work site at karur gp, add brush, putty, glue at 5% on cost of paint_ nrlm work site at karur gp, add 15% wastage_ nrlm work site at karur gp, add 5% wastage charges_ nrlm work site at karur gp, add cutting and other wastage 5%_ nrlm work site at karur gp, add providing and removing scaffolding at 3% on labour_ nrlm work site at karur gp, add handling , loading and unloading at 1% on material_ nrlm work site at karur gp, add handling , loading and unloading at 2% on material_ nrlm work site at karur gp, add watering charges at 1 % on material_ nrlm work site at karur gp, enamel metal paint_ nrlm work site at karur gp, ready mix primer paint (ready mix red lead paint)_ nrlm work site at karur gp, polyenthylene water storage tank of specified capacity l_ nrlm work site at karur gp, enamel paint_ nrlm work site at karur gp, dry distemper_ nrlm work site at karur gp, binding wire_ nrlm work site at karur gp, plasticizer / super plasticizer_ nrlm work site at karur gp, ms plates 40 x 6 mm _ nrlm work site at karur gp, ms square rod 16 x 16 mm _ nrlm work site at karur gp, ms plate 12 mm x 6 mm _ nrlm work site at karur gp, base plate / base plate_ nrlm work site at karur gp, gusset plates 6 mm thick_ nrlm work site at karur gp, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre_ nrlm work site at karur gp, ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre_ nrlm work site at karur gp, whitening_ nrlm work site at karur gp, hom of cutting and grinding machine - 1_ nrlm work site at karur gp, mixer (concrete small used in culvert)_ nrlm work site at karur gp, add_ nrlm work site at karur gp, unit cost as per the specification_ nrlm work site at karur gp, lead or pvc connection pipe 32mm dia (for wash basin)_ nrlm work site at karur gp, c.i. / m.s. brackets for flushing cistern_ nrlm work site at karur gp, brass stop cock_ nrlm work site at karur gp, cp brass waste 32 mm of standard pattern_ nrlm work site at karur gp, cp brass chain with plug_ nrlm work site at karur gp, copper plated brass piller tap 15mm_ nrlm work site at karur gp, white vitreous china clay flat back wash basin size 550x400mm_ nrlm work site at karur gp, vitreous china orrisa type w.c. pan size 580 mm_ nrlm work site at karur gp, mechanic class ii/mechanic hmp grade i/eme grade_ nrlm work site at karur gp,

CTN :41067144

22 Jul, 2025 8.85 Crore

Patna - Bihar

Tender For mgsy/25-26/siwan-1 /01 - high level bridge across river on const. of rcc hl bridge with approach road over sona river between pakri makriyar to chhotka manjha in block - siwan sadar , rwd division siwan-1 , district - siwan , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the fu

CTN :41037857

22 Jul, 2025 9.18 Crore

Gopalganj - Bihar

Tender For mgsy/25-26/gopalganj-1 /01 - high level bridge across river on barai patti to niranjana janewali path me dhawast screw pipe pul ke asthan par new pul nirman in block - gopalganj , rwd division gopalganj-1 , district - gopalganj , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to th

State Government

CTN :41058396

02 Aug, 2025 NA

Panchmahal - Gujarat

Tender For supplying and stacking various type of building, road &other construction materials, at various places of taluka panchayat, jambughoda under mgnrega (annual unit rate) - cement isi mark 53 grade, etc. opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900 m.m. dia, r.c.c. np3 pipe 600 m.m. dia, r.c.c. np3 pipe 300 m.m. dia, crushed stone aggregate for hard quality 10 to 20 mm, crushed stone aggregate for hard quality 40 mm, crushed stone aggregate for hard quality 40 to 63 mm, hand broken metal 25-90 m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25 m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvanize iron sheet 0.8 tick class 3, iron angle and pipe, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400 m.m., colour distemper primer, marble slab/platform 25m.m. thick double polished, galvanized mild steel tube medium grade 20m.m., galvanized mild steel tube medium grade 32m.m., galvanized mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, hire charge for vibrator surface, hire charge for vibrator needle, asbestos. cement sheet, centering(scaffolding), iron door, iron window, oil paint, uncost material carting trip, p or s trap 100 m.m. dia

CTN :41044712

01 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of scaffolding material : : - vertical pipe , horizontal pipe , m s scaffolding board size 2465mm x 295m , angular transom sockets , staircase 9 steps 2500 m x 2000m , diagonal bracing tube 2500 mm , hop up bracket 2 board , hop up bracket 3 board , hop up bracket 4 board , toe board 2_5 mm , toe board 1_25 mm , fixed base plate , adjustable base plate , pipe securing double coupler swivel

CTN :41024712

25 Jul, 2025 6.41 Lacs

Multi City - Karnataka

Tender For for the procurement of school compound work cuntsruction of various materials gp uppanasi - display board / cib_1upi, lumpsum material_1upi, painter class i_1upi, add brush, putty, sand paper at 2 percentage on cost of paint_1upi, water proofing cement paint_1upi, add providing and removing scaffolding at 3 percentage on labour_1upi, add handling , loading and unloading at 1 percentageon material_1upi, casurina poles 100 to 150 mm_1upi, brick_1upi, add formwork at 4 percentage out of material and labour_1upi, mason class i (with tools)_1upi, broken granite metal 10 mm_1upi, granite metal 20 mm_1upi, granite metal 40 mm_1upi, mixer (concrete small used in culvert)_1upi, bond stone 20 x 20 x 45 cm_1upi, rubble stones_1upi, add watering charges at 1 percentage on material_1upi, mixer (concrete) 1 cum capacity_1upi, portland cement_1upi, coarse sand (zone iii)_1upi, broken stone aggregate 12 mm to 10 mm size_1upi, broken stone aggregate 20 mm size_1upi, broken stone aggregate 40 mm size_1upi

Central Government/Public Sector

CTN :40746664

15 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening

CTN :40955702

12 Jul, 2025 7.22 Lacs

Multi City - Karnataka

Tender For tender inviting for material supply to adhihalli village sanjivini shed - tools and plants 2 %onmaterial adhi060, hom of cutting and grinding machine adhi059, mechanic class ii/mechanic hmp grade i/eme grade adhi058, add adhi057, hom of welding and grinding machine adhi056, corbon electrodes adhi055, rms gusset plate adhi054, ms pipes of 80 mm to 100 mm diaadhi053, polyethylene water storage tank with cover and suitable locking arrangemnet adhi052, add brush, putty, sand paper at 2% on cost of paint adhi051, water proofing cement paint adhi050, add brush, putty, glue at 5% on cost of paint adhi049, whitening adhi048, dry distemper adhi047, unit cost as per the specification adhi046, add hom of welding and grinding machine 2% on material adhi045, fabricator adhi044, a 5.50 mm thick plain glass adhi043, chrominum plated screws adhi042, cleat angles adhi041, alluminium handles - 15 mm adhi040, alluminium tower bolt - 20 cm adhi039, pvc beading adhi038, rubber beading for shutters beading adhi037, nylon rollers adhi036, powder coated 60-70 micron adhi035, enamel metal paint adhi034, painter class i adhi033, ready mix primer paint (ready mix red lead paint) adhi032, add hom of welding and grinding machine 4% on material adhi031, welder grade i adhi030, fitter class i adhi029, ms flat adhi028, m.s rods adhi027, vitrified tiles 600x600 mm adhi026, add providing and removing scaffolding at 3% on labour adhi025, solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm adhi024, add watering charges at 1 % on labour adhi023, add handling , loading and unloading at 1% on material adhi022, casurina poles 100 - 150 mm adhi021, stone chistler class ii adhi020, mason class ii (with tools) adhi019, mason class i (with tools) adhi018, mixer (concrete small used in culvert) adhi017, boulders adhi016, bond stone 20 x 20 x 45 cm adhi015, size stone 20 x 20 x 25 cms adhi014, binding wire adhi013, tmt bars fe 500 adhi012, formwork, centering & scaffolding for beams & lintels of building adhi011, formwork, centering & scaffolding for columns & piers adhi010, hom of vibrator 0.71 days adhi009, plasticizer / super plasticizer adhi008, add watering charges at 1 % on material adhi007, mixer (concrete) - 1 cum capacity adhi006, portland cement adhi005, coarse sand (zone iii) adhi004, broken stone aggregate 12 mm to 10 mm size adhi003, broken stone aggregate 20 mm size adhi002, broken stone aggregate 40 mm size adhi001

CTN :40944434

11 Jul, 2025 5.76 Lacs

Multi City - Karnataka

Tender For construction of a compound to the west of the new government high school in gutaguddi village - primer school compound gp, binding wire school compound, welding charges 10 on material school compound, o20 mm dia hold fast rod school compound, m60 x 60 x 10 guage sq. plate washer school compound, school compound 15 mm bolt, m.s. angles 65 x 65 x 6 mm 34.7 kgs school compound, fitter class i school compound, o12 x 12 gauge g.i. wire 100 mtr at ts. 8.00/ per m school compound, add providing and removing scaffolding at 3% on labour school compound, painter class i school compound, water proofing cement paint school compound, coarse sand zone iii school compound, portland cement school compound, stone chistler class ii school compound, add watering charges at 1 % on material school compound, mason class i (with tools) school compound, mason class ii (with tools) school compound, mixer (concrete) - 1 cum capacity school compound, mixer concrete small used in culvert school compound, size stone 20 x 20 x 25 cms school compound, rubble stones school compound, casurina poles 100 - 150 mm school compound, broken stone aggregate 40 mm size school compound, broken stone aggregate 20 mm size school compound, broken stone aggregate 12 mm to 10 mm size school compound, boulders school compound, bond stone 20 x 20 x 45 cm school compound

Hanger Building Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector