Latest hard chrome plating Tenders | Government hard chrome plating Tenders

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

CTN :45321977

01 Jun, 2026 8.30 Lacs

Palwal - Haryana

Tender For supply and testing of equipments for testing of samples in developements work in mc palwal. - supply of digital compression testing machine (capacity 2000kn), supply of slump cone testing apparatus frustum-shaped metallic cone with specific dimensions, a tamping rod, and a base plate with powder coating, core cutting machine electrical heavy-duty tool that uses an electric motor and a diamond-tipped drill bit to create clean, precise holes in materials like concrete, asphalt, and brick, auto level sokkia b-40a with accessories, its durable, high-precision optical instrument for surveying and construction, featuring an automatic compensator for accurate leveling despite vibrations and a robust, water-resistant body, rebound hammer manual make- gsi, sieve gsb frame 30cm dia x 45mm, sieve gsb frame 30cm dia x 40mm, sieve gsb frame 30cm dia x 37.5mm, sieve gsb frame 30cm dia x 31.5mm, sieve gsb frame 30cm dia x 26.5mm, sieve gsb frame 30cm dia x 25mm, sieve gsb frame 30cm dia x 20mm, sieve gsb frame 30cm dia x 19mm, sieve gsb frame 30cm dia x 16mm, sieve gsb frame 30cm dia x 14mm, sieve gsb frame 30cm dia x 10mm, sieve gsb frame 30cm dia x 9.5mm, sieve gsb frame 30cm dia x 8mm, sieve gsb frame 30cm dia x 5.0mm, sieve gsb frame 30cm dia x 4.00mm, sieve gsb frame 30cm dia x 3.35mm, sieve gsbframe 30cm dia x 2.0mm, wbm, trowel with a short handle and a flat metal part used in building for spreading cement, plump bob - brass it`s a weight, typically made of solid, durable brass, with a pointed tip at the end of a string, head pan, line level / torpedo level tapered level with vials for horizontal, vertical, and 45 measurements, hammer 2 kg, hammer 5 kg, hammer 10 kg, hoe with a long wooden handle, drill machine bosch, measuring box, screw diver set-taparia, wrench set, elco meter used for inspection equipment, primarily for measuring the thickness and profile of coatings on various substrates like metal and concrete, digital vernier calipers digital display to show measurements of internal and external dimensions, right angle ( both), pick axe, digital thermometer, sample bag (3 pack of 25 pcs), is code, testing manuals, mug, buckets, roadometer metric measuring wheel, bosch digital measuring tape, 30 meter tape measuring tape, 50 meter tape measuring tape

CTN :45330058

02 Jun, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For procurement of furniture for new phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extra cushioning for a truly lavish sl

Central Government And Public Sector

CTN :45336928

02 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head screw m16x45 high tensile materials and specification as per is:1364(part-2)-2002,ce-with property class- 10.9 to is:1367(part-3)-2002, coating as per mdts-057, packing instruction - pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45336929

02 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45143998

01 Jun, 2026 NA

Nadia - West Bengal

Tender For corrigendum : supply of electrical materials day to day maintenance in different places under bckv, mohanpur, nadia - 20 watts led battenmodel no. 31423pin : 20 w, lin : 0.10 a, 240 v - 50 hzp.f. : 0.9, ip : 20, cct: 6500 k, ta : 35 degree cmake philipsormodel number : d532065power consumption: 20 wshape: straight linearlength: 115 cmmodel name : 20w 4 feet batten 6500k (cool day)color : whitematerial : polycarbonatemake - wipro or model number : led20wbt-grs65kpro_pk-2model name : grace procolor : whitetype : ledmaterial : polycarbonateshape : straight linearholder : t5 1/2base : b15dmake - orient, 1200 mm sweep a.c. ceiling fan, cupper winding including double ball bearing (brand approved by eic) model - striker, colour - brownmake - ushaormodel - sure breezesea, colour - brownmake - crompton gravesorblade - three blade, volt - 230 v. a.c., frequency - 50 hz, corrosion resistance powder coated blades, colour brown, bee star rated energy efficient ceiling fan, rust free coating for long lifemake bajaj, model - frore, 9 mtrs. insulating tape (pvc), tape width - 18 mm, backing material - pvc- polyvnyl chloride (brand approved by eic)make - anchoreormake - steel gripormake - deon, 400 watts metal halide ballast (brand approved by eic)ballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50 hz +/-5% (make - philips)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 60 hz +/-5%, power factor >0.9 (make - crompton)orballast wattage 400 w, operating voltage 220 volt -240 volt, supply frequency 50hz +/-5%, circuit type - cwa (make - bajaj), 400 watts 2 pole ingitor (brand approved by eic)model - hpi (-t), 250-400 w s/51/02 ignitor (make - philips)ormodel - ign112s/mh 400 w, power rating 301-400 w (make - crompton)orpower - 400 watts, voltage- 240 v, frequency - 50/60 hz, product name - sn 58/02 (make - bajaj), 400 watts metal halide lamp (brand approved by eic)model - hpit400du - ph; lighting colour - cool white, length - 286 mm; bulb type - t46; diameter - 47 mm, life - 20000 hours (make - philips)orvoltage - 109, power factor >0.85 v, operating current - 438 ma (make - crompton graves)orvoltage - 220-240 v, wattages - 400 watts, colour temperature (kelvin) - 4000 k, cool white, initial lumen - 36000 lm, mean lumen - 24000 lm, cat no. mh 400, lighting technology - metal halide (make - bajaj), 12 watts led bulb (brand approved by eic)light output - 900 lumens; power factor - >0.9 (make - philips)orlight output - 1260 lumens; power factor - >0.9, life 25000 hr. (make - crompton)orbulb colour - white, wattage - 12 watt, lumen - 1400 lm. (make - bajaj), 2.5 mfd. capacitor (brand approved by eic)voltage - 230 volt, frequency - 50 hz, model - tip2.50 mfd, 1200 mm - sweep ac ceiling fan, non pcb oil filled (make - tibcon)orvoltage - 220-230 v, frequency - 50 hz (make - crompton greeves)orvoltage - 220-230 v, frequency - 50-60 hz (make - keltron), fan bearing (brand approved by eic)bearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), fan bearing (brand approved by eic)bearing no. 6202, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - skf)orbearing no. 6201-2rs, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - fag)orbearing no. 6201, weight - 300 g, dimension - 15 mm, uses / appliation - fan, material - chrome steel (make - tata), 0.75 sq.mm. cu. wire (brand approved by eic)type unsheathed industrial wire; volt 1100 vmake finolexortype unsheathed industrial wire; volt 1100 v, brand - polycab etira, length - 90 mtrs., weight - 1.2 kg., conductor materials - cupper, current capacity - 14 watt, energy - 3.25 kw at

CTN :45301145

30 May, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For providing and installing furniture in staff quarters of new naroli phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extr

CTN :45186153

25 May, 2026 NA

Belpahar - Odisha

Tender For supply and installation of different items - supplying, placing and fixing of godrej make metal rectangular office table with 5 drawers storage, particle board table top material suitable for office of dimensions w x h x d (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of engineer-in-charge., supplying, placing and fixing of godrej or durian make l shaped help desk with a flat linear table top in maple with dark grey sides, with computer tray, computer trolley and 3 drawers of varying proportion with a central locking mechanism of size: table top: 1500'(l)x600'(w)x750(h), side unit: 900'(l)x450(w)x750(h), and as per direction of engineer-in-charge., supplying, placing and fixing of godrej make brawn 6- seater dining table set with tempered glass top of size 1349mm(l)x749mm(h)x800mm(w) of rectangular shaped with 6 m.s chairs of size 450mmx988mmx518mm with leather upholstery and cushion including cost of all materials and as per direction of engineer-in-charge., supplying, placing and fixing of godrej mingle conference table with av integration (10-seater) of frame material made of prelaminated twin particle board and table top material made of mdf board with dimensions of 3000mm x 740mm x 1150mm with termite and weather proof including cost of all materials and direction of engineer-in-charge., supplying, placing and fixing of 10 numbers godrej make sally mid back chair with wide back rest and arm rest, adjustable lumbar support, ergonomic seat cushion of dimension of 756mm(w) x 885mm to 985mm(h) x 756mm(d) with wheels and upholstery knitted fabric and glass filled polypropylene and as per direction of engineer-in-charge., supplying, placing and fixing of 43" 4k led smart tv of make lg/sony/samsung with gen5 ai processor 4k with ai brightness and 4k upscaling, magic remote, film maker mode, ai sound system, smart web os platform, with ott apps supported, allm, hgig mode and as per direction of engineer-in-charge., supplying, placing and installing and all other ancillary works for sitc of isi marked (is:2878) fire extinguisher, abc type capacity 6 kg. with all accessories. (ever safe/fire shield)., supplying and placing of nilkamal magic iron black plastic chair with arm rest stackable texture finish 1 seater of dimensions 570 (w) 607(d) 900 (h)and as per direction of engineer-in-charge., supplying, placing and installing nilkamal magna 15 personal locker of dimensions width (mm) 905, depth (mm) 400, height (mm) 1850, door made of 0.8 mm thick (22 gauge) powder coated crca sheet, body, back & shelves made of 0.6 mm thick (24 gauge) powder coated crca sheet, locking facility available with a duplicate key total 15 numbers of individual lockers, as per direction of engineer-in-charge., supplying, placing and installing regular steel (magnetic) whiteboard for office, home & school, lightweight aluminum frame, resin coated steel writing surface, alloy aluminum (6063-t6 frame), paper honeycomb core & virgin abs corners 3x4 feet, with alloy steel folding easel stand 5 feet for white board (can hold up to 3x4 feet whiteboards) with dimension 600d x 900w x 1500h mm as direction of engineer-in-charge., supplying, placing and installing kent r/o+uv standalone water purifier system (kent, model cristal plus), 11 l storage capacity, multiple purification by ro+uf+tds controller, uv led protection in storage tank and all other ancillary works., supplying, placing and installing white and gray godrej glass double door storwel almirah/ bookshelf of iron and glass material with brass levers lock, handles , standard grade enamel paint coating is oven dried under controlled temperature to avert damaging effects of scratch, accessible with 10 types of separate lockers, of dimensions 914 mm (w), 320 mm (d), 947 mm (h), and as per the direction of engineer-in-charge., supplying, placing and installing high quality engineered wood godrej make verve queen size bed of dimensions w x h x d (mm) 1584 x 88

CTN :45257939

03 Jun, 2026 25.00 Lacs

Hoshangabad - Madhya Pradesh

Tender For regarding purchase of repair materials required from time to time for tractors and tata magic vehicles in the vehicle branch of the body for the financial year 2026-27 (as per the attached list) - purchase of repair materials required from time to time for tata magic vehicles: diesel filter, oil filter, air filter, gear lever cover, accelerator cable, clutch cable, heater plug, gas kit, clutch plate, pressure plate set, timing belt, fan belt, headlight bulb, silencer coating, silencer rubber, engine tensioner, engine kit, engine oil kit, release bearing, front wheel bearing, water pump, gasket kit, radiator, anabond tube (100g), labor charge (engine), labor charge (clutch and pressure plate), labor charge (wiring—as per work), labor charge (other tasks—as per work). purchase of repair materials required from time to time for tractor vehicles.

Hard Chrome Plating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector

State Government