Get complete information related to latest Hard Stone Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hard Stone Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hard Stone Tenders.
Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit
Tender For supply and stacking of 21400 cum 50 mm gauge hardstone machine crushed hardstone track ballast at gundabihar depot including loading into railway wagon/hoppers and unloading the same in ranchi division.
Tender For supply and stacking of 83000 cum 50 mm gauge hardstone machine crushed hardstone track ballast at ramgarh depot including loading into railway wagon/hoppers and unloading the same in ranchi division.
Tender For supply and stacking of 63000 cum 50 mm gauge hardstone machine crushed hardstone track ballast at ramgarh depot including loading into railway wagon/hoppers and unloading the same in ranchi division.
Tender For supply and stacking of 41400 cum 50 mm gauge hardstone machine crushed hardstone track ballast at gundabihar depot including loading into railway wagon/hoppers and unloading the same in ranchi division.
Tender For supplying and stacking, loading and unloading of 46451 cum, 65 mm gauge machine crushed hardstone ballast confirming to railway specification is/rdso-ge/0001:2023 february 2023 and latest correction slip from identified source at ramkumarpura mining area, located at village ramkumarpura, tehsil khetri, district jhunjhunu, rajasthan or khanak mining area (under control by hsiidc), tehsil tosham, district bhiwani, haryana at sub depot no. 2 in tughlakabad (tkd) ballast depot under den/track/dli.
Tender For unit rate of composite items for recharge scheme for new and defunct tube wells/wells for groundwater recharge in bhavnagar dist. for the year 2026-27 - half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional(r&b sor 2024-25 , it.code-06008a2a, p.no.70)(1 represents labour cess added), brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:5. (1- cement : 5 -fine sand) (b) conventional(r&b sor 2024-25, it.code-06001ba, p.no.67)(1 represents labour cess added), providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(r&b sor 2024-25 it.no.23067, pg.no.164)(1 represents labour cess added), providing & fixing 200 mm dia "u" pvc casing pipe "cm" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), providing & fixing 175 mm dia "u" pvc casing pipe "cs" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), drilling of bore well by dth rig in rocky formation in all talukas of all districts of zone - iii. up to 350 mtr. for dia 200mm(gwssb 2022-23 sor, it.no.3.2, p.no.2), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(b) dense or hard soil(r&b sor 2024-25 , it.code-04b001b, p.no.47)(1 represents labour cess added), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(d) soft rock not requiring blasting(r&b sor 2024-25 , it.code-04b001d, p.no.47) (1 represents labour cess added), jungle cutting and site clearing(r&b sor 2024-25 , it.code-26117a, p.no.246) (1represents labour cess added), pebbles of size 5 to 10 millimeter (river pebbles)(gwssb mech 2022-23 sor,anne-a sr 18 ), gravel of size 2 to 5 millimeter(gwssb mech 2022-23 sor,anne-a sr 18 ), coarse sand(gwssb 2022-23 sor, section 1d it.no.5.1, p.no.61), backfilling of excavated tranch for pipeline with soil(gwssb 2022-23 sor, section 1&2b it.no.14(1), p.no.40), suppliying o graded stone aggregate of following sizes (forw.b.m. road)(2) hand broken stoneaggregate 40 mm to 63 mm size.(r&b sor 2024-25 , it.code-26011b, p.no.176), supplying of crushed stone aggregates, chippings etc.of hardstone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(iv) 20mm(r&b sor 2024-25 , it.code-26012d, p.no.176) (1 represents labour cess added), supplying of crushed stone aggregates, chippings etc.of hardstone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(vi) 10mm(r&b sor 2024-25 , it.code-26012f, p.no.176) (1represents labour cess added), spreading and laying stone agreegate of different size in to proper layer specified as per design and drawing inncl. hand packing etc complete with all lead and lift (as per ra), providing and fixing in position white marble plate of size 45x45x1.8 cm incl ingraving the tettera as per drawing/as direct etc complete. (irr. sor 2024-25 ch.5 it.17 pg.22)