Latest hardness tester scrap Tenders | Government hardness tester scrap Tenders

State Government

CTN :45368252

16 Jun, 2026 NA

Papumpare - Arunachal Pradesh

Tender For purchase of equipment texture analyzer , 3d printer (bambu lab x1 carbon combo) , universal testing machine (utm) , data acquisition system , surface roughness tester surface , kjeldahl digestion and distillation unit , agilent cary eclipse fluorescence spectrophotometer texture analyzer , 3d printer (bambu lab x1 carbon combo) , universal testing machine (utm) , data acquisition system , surface roughness tester surface , kjeldahl digestion and distillation unit , agilent cary eclipse fluorescence spectrophotometer

CTN :45363442

06 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of lab items for civil department - boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit) , los angeles abrasion testing machine with counter standards: en 1097-2, 12697-17, 13450; astm c131,c535; aashto t96 description specification: the machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. the drum is rotated at a speed of 31-33 r.p.m. the internal shelf provided with the machine confirms to astm, aashto and en standards. the machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. the drum is equipped with an interlock device which allows the operator to lock the drum into position. , plastic limit apparatus 1.glass plate 20 cm x 15 cm having ground ends and one side frosted. 2.brass or stainless steel rod 3 mm dia x 150 mm long 3.flexible spatula - 8 cm long, 2 cm wide 4.set of 6 moisture containers 5.porcelaine basin 150 mm dia. 6.plastic wash bottle 500ml, weighing balance -100 kg capacity capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), flow table apparatus for concrete with accessoriesdimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45358061

18 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of various items of lab equipments for govt. p g college guna district guna (m.p.) under p m usha pariyojna 4th call - supply of various lab equipments items for govt. p g college guna district guna (m.p.) 4th call, waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr co

CTN :45206242

08 Jun, 2026 25.00 Lacs

Nagaur - Rajasthan

Tender For corrigendum : supply of lab testing and other hospital use items for dh khinvsar - item discreption, gynee ot table, examination table (two fold), ot light (single dome), ot light (mobile), suction imp machine, fetal doppler, laryngoscope (pedia), sims speculum (set of 3), vulsellum 10", sponge holder 10", uterine dilator (all sizes), needle holder 6", ambu bag (infant), o2 cylinder (small), o2 cylinder (big), o2 cylinder (a/b type e), full s.s. cart, forceps delivery set, lscs set, d&c set, hysterectomy set, mayo scissors 6", artery curved 6", towel clip 5", doyen retractor, deaver retractor large, tray instrument 8x10, kidney tray lg, bowl surgical, formaline chamber 20cm, fogger machine, instrument trolley 18x24, drum skf 11x9, drum skf 12x15, cidex tray 22", laryngoscope adult, fowler bed, autoclave top, fumigator machine 5l volume, stretcher trolley, ot table double dome light, b.c unit, boiler, cautery machine, foot step, ambu bag adult, iv stand, fowler bed (additional), right angle retractor (all sizes), myoma screw, defibrillator, multipara monitor, makintosh sheet, boyles apparatus, implant removal set, osteotome curved (large), osteotome curved (medium), osteotome curved (small), periosteum elevator (medium curved), bone drill machine (big), bone drill machine (small), k-wire cutter, hammer (large), hammer (medium), bone nibbler curved (large), bone nibbler curved (medium), plier, jumbo cutter, screw driver 4.5 (medium), screw driver (large), screw driver 3.5 (medium), screw driver 2.5 (small), periosteum stat, t-handle, plaster cutter (electric), plaster cutter (manual), x-ray view box, bone holding forceps (small), bone holding forceps (large), ot gown dr plain, plastic apron, ot hole sheet (3x3), ot plain sheet (3x3), tbw, k-wire cutter, reamer set, cannulated drill/screw, ot linen, electric tourniquet machine, nerve stimulator, general instrument set, s. mask bandage 6", s. mask bandage 4", 90 retractor extra, vac (vacuum) machine, dvt pump, self retaining retractor, bone curette (curved), bone chisel, screw driver 4.5, screw driver 3.5, autoclave triple valve

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45340411

04 Jun, 2026 NA

Theni - Tamil Nadu

Tender For purchase of non consumable item in material testing lab for civil department - torsion testing machine (code e006)function: conducts torsion and twist tests on materials. such as metal wires, tubes, and sheetstorque measurement : pendulum dynamometer systemtorque application : geared motor through a gearboxtorque range : adjustablematerial tested :metal wires, tubes, sheet materialsfloor-mounted electromechanical type,230 v ac, 50 hz power supply,digital display, sand replacement test apparatus (or) core cutter devices(code e014)metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300 mm with 100 mm hole).another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits seamless steel cylinder with no sharp edges.common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products), total station with all accessories(code e022)leica flexline ts10 reflectorless total station angle accuracy: 1 5 (smaller values = higher precision). magnification: ~28x 30x optical zoom. distance range:with prism: 2,000 m 6,000 m+reflectorless: 600 m 2,000 m typical. battery backup: ~12 36 hrs field operation., rockwell cum brinell hardness testing machine with intentor set box(code e031)min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories:steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine

CTN :45351363

01 Jun, 2026 NA

Nilgiris - Tamil Nadu

Tender For civil lab equipments - impact testing machine for izod /charpy test - 1 no, sieve test for coarse aggregate made of brass 200mm dia complete set - 2 set, rockwell cum brinell harness testing machine with intentor set box - 1 no

Central Government/Public Sector

CTN :45348098

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For providing of calibration services - calibration of steel wire rope testing machine; calibration of steel wire rope testing machine; nabl labs; lab

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

CTN :44856128

28 May, 2026 19.93 Lacs

Chandigarh - Chandigarh

Tender For bid to ras supply of qcc lab items d d - pensky martens apparatus , compressive testing machine , needle concrete vibrator , sieve shaker machine , tamping rod

Hardness Tester Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector