Get complete information related to latest Hardware Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hardware Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hardware Item Tenders.
Tender For set of hardwareitems required for primary suspension consisting of 08 items as follows. (1) necked down bolt m24 x 100 as per property class 8.8 and clw drg. no.1209.01.315.006 alt.-1. qty/set. = 03 nos., (2) hex. head bolt m16 x 70, as per property class 8.8, iso 4014 and clw/ms/3/084 alt.-6. qty/set. = 02 nos., (3) hex. head bolt m24 x 300, as per property class 8.8, iso 4014 and clw/ms/3/084 alt.-6. qty/set. = 03 nos., (4) hex head bolt m16 x 50, as per property class 8.8, iso 4017 and clw/ms/3/084 alt.-6. qty/set. = 04 nos., (5) helical spring washer a16 fst-zn8cx, iso 4017. qty/set. = 04 nos., (6) washer 25 200hv-din 125. qty/set. = 04 nos., (7) hex head bolt m20 x 250 as per property class 8.8, iso 4014 and clw/ms/3/084 alt.-6. qty/set. = 03 nos., (8) hex head bolt m20 x 40 as per property class 8.8, iso 4017 and clw/ms/3/084 alt.-6. qty/set. = 03 nos.note: 1) all dimensions are in mm.2) one sample set should be got approved before effecting bulk supply.
Tender For supply of plant and machinary items d d -hrs meter , air cleaner element , universal joint assay , magnet filter , head light assy , end bit l r side , ignition switch , indicator light , gear lever key , hyd jack cyl seal kit , fuel filter , oil filter , fuel filter cottan , hyd filter , engine stopper switch , fan belt , light switch , screen filter , steering filter , water temp gauge , cleaner active wiper , cap side shoft stablizer , bulb , door handle left side , tail lamp left side , tail lamp right side , door jack , rear window jack , spider bearing , fuel filter , oil filter , transmission filter , hyd strainer , bucket tooth , tooth side cutter l r , accelerator cable , front wheel stard , seal pivot pin , pin pivot , shim 1. 4mm , filter fule assy , fuse 15 10 05 20 , wiper motor , pin lock nut bolt 17 4 inch , changeover relay , stay door left side , screw m6 x 25 , reflector , scal door , scal door left side rear window , scal door r s rear window , gash sturd 700n , fan , lock , buch , ring clamping , water seprator , lever bottom gear shift , lever gear shift , belt , fuel cap , air filter , munting cab upper , munting cab lower , working light , nut lock 3 4 , catch window lock back , tube front type 12. 5 x 80 18 , tube rear type 16. 9 x 28 , fuel pump solonid , lock grille , fan face , bar window stay , nut standard m8 , inner latch assy , adoptor scavenge , hose scavenge , cap screw m5 , handle left hand right hand , handle assy rl , air filter inner , filter element , fuel filter w seperator 12 , engine oil filter , filt er hyd wo rings , bolt wheel , nut wheel , left hand side sliding glass
Tender For supply of hardwareitems for capstone project of mechanical department of dr. b. r. ambedkar institute of technology (dbrait), sri vijaya puram - supply of hardwareitems, ss square tube (50 x 50 mm, ss 304 grade, 6m length, 16 gauge), ss rectangle tube (50 x 40 mm, ss 304 grade, 6m length, 16 gauge), ss square tube(25 x 25 mm, ss 304 grade, 6m length, 16 gauge), ss square tube(20 x 20 mm, ss 304 grade, 6m length, 16 gauge), ss sheet (size: 8 x 4 feet, 18 gauge, ss 304 grade), ss bush hinges(120x40 mm, with shaft, ss 304 grade, cylindrical type), s.s 360 degree swivel gate v-groove wheel(wheel dia: 3 inches, groove width: 20-22 mm, bearing type,ss 304 grade), ms c channel 4 inches, 6 m length, heavy duty, (100 x 50x 5 mm) thickness,, ss round bar(20 mm, 6 m length, ss 304 grade), ss square tube100x100mm, 12 gauge, 6 m length, heavy duty, ss 304 grade), teflon bush roller with ss bracket(100 x 50 mm), ss welding rod (size: 2.5 mm, e308l-16), ms welding rod( size: 2.5 mm, e6013), metal cutting wheel (14 inches), metal cutting wheel (4 inch, internal diameter: 16mm, good quality), metal grinding wheel (grain size: 60, dia: 4 inch), ss flap grinding wheel(100x6.5x16 mm, 60 grade), ss grinding wheel ag7 (100x6.5x16 mm, 80 grade), ss paper grinding wheel (100x6.5x16 mm, 120 grade), ss buffing wheel( cotton stitched polishing wheel, 04 inches), ss polish bar (soap)( green bar), zinc rich cold galvanizing spray (90% zinc and foam and durable self healing grade 3060, 493ml), primer (red oxide metal primer), g.i pipe( diameter: 2 inches, grade: medium), g.i pipe (diameter: 1.5 inches, grade: medium), g.i plain tee( diameter: 2 inches, without thread, heavy duty), g.i plain flange (diameter: 2 inches, without thread, heavy duty), rubber gasket (4 mm), m.s heavy duty socket (0.5 inches), universal heavy duty foam fountain jetnozzle (1 inch ), s.s flat head hexagonal nut bolt withwasher(diameter: 0.5 inch, length: 1.5 inch, 304 grade, with doublewasher, heavy duty), s.s nut bolt with double washer( diameter:1/4 inch, length: 1 inch, 304 grade, with doublewasher, heavy duty), hexagonal brass rod (32 mm diameter, 1 meter length), s.s nipple (1.5 inch x 3 inch long), s.s nipple(2 inch x 3 inch long), s.s nipple(1 inch x 3 inch long), s.s ball valve(1 inch, 304 grade), gm/brass ball valve(1.5 inch, heavy duty), gm/brass ball valve(2 inch, heavy duty ), teflon tape(width: 0.5 inch), epoxy paint with hardener(colour: smoke grey, made of two components base andhardener), g.i union socket(1.5 inch, grade: heavy), s.s strip(20 x 3 mm), s.s ball valve(3/4 inch, heavy duty), metal grinding wheel(4 inch, internal diameter:16mm, good quality), s.s grinding wheel(grade 60, 4 inch diameter, internal diameter:16mm), s.s paper grinding wheel(grade 100, 4 inch diameter, internal diameter: hole 16 mm), water emery paper(150 no.), cable tie(200 mm (100 nos. pkt)), zinc primer with hardener(standard), flexible drain pipe(diameter : 3 inches, pvc), epoxy paint with hardener(colour: white, made of two components base and hardener), epoxy paint with hardener(colour: red, made of two components base and hardener), epoxy paint with hardener(colour: dark blue, made of two components base andhardener), epoxy paint with hardener(colour: black, made of two components base and hardener), epoxy zinc phosphate primer(air drying, high performance, anti-corrosion, zinc phosphatesuspended in an epoxy matrix), nc thinner(1 litre bottle), paint brush(2 inch), paint brush(4 inch), sand paper(0.5mm (230 280 mm), p800 ), stainless steel sheet(flat sheet, thickness: 12 guage or 2mm, size: 8 x 4 feet,grade: 304), dendrite (adhesive) (50 ml.)
Tender For procurement of hardwareitems for day to day maintenance of various tube wells installed in ambedkar nagar constituency ac-48. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe: - tata / jindal50mm dia., 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:50mm dia., 40mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:50mm dia., 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt.
Tender For supply, installation ,testing and commissioning of cctv system medical college kottayam - supply, installation ,testing and commissioning of cctv system medical college kottayam, sitc of 4 mp ip outdoor bullet camera with 30 mtr ir distance,1/2.9 inch progressive image scan sensor, 3.6 mm focal length of lens, signal system ntsc/pal, input power poe and 12v dc, video output hd1080p, true day/night (ir-cut filter). wide dynamic range 120db or better, video compression h.265+/h.265/h.264+/h.264, ip 67 rating etc. required certifications and markings such as ul,fcc,ce, rohs, etc., sitc of network video recorder support 32 channel or above, should support resolution 4 mp ip camera, 2 sata hdd ports each supports upto 10tb, 25 fps record rate. bandwidth 160mbps, should support 1080/720 ip camera. h.264/h.265 video compression or better, network 2x rj-45 10/1000mbps self-adaptive ethernet interfaces: vga, hdmi, usb etc. required certifications and markings such as ul, fcc, ce, rohs etc., sitc of 8tb, surveillance hard disk having 7200 rpm, sitc of 28-port giga bit easy smart unmanaged switch with 24- port poe+24 10/100/1000 mbps rj45 poe+ ports switch with 2 sfp slots, 250 w or above power budget, sitc of 16-port gigabit easy smart poe+ unmanaged switch with 2 sfp slots 16 10/100/1000 mbps, 250w or above power budget, sitc of 28-port gigabit smart managed layer 2 switch with 24- port poe with 4 sfp port having 250w or above power budget, sitc of 12 port fully loaded liu 19 inch rack mountable cabinet cold rolled steel . 24f, 1u, lcsmos2, loaded with pigtails, splice tray, adapter and splice protectors, sitc of liu box including splicing and termination as required., supply, installation, testing and commissioning of duplex optical transceiver/ sfp module, transmission range 5 km or above, e sfp, ge, single-mode module suitable for the above switch with necessary lc/upc pigtails, and including splicing and termination as required., supply and installation of sc-lc/lc-lc3mtrsmfiber duplex patch cord, sitc of 24awg cat6 frls, 0.5 meter standard factory crimped patch cord conforming to tia/eia-568-b.1-1, iex 60603-7-4., supply and fixing 19 inch 6u wall mount rack for switches with cable manager, hardware mounting kit,power distribution unit and glass door and lock., supply and fixing 19 inch 9u wall mount rack forswitches with cable manager, hardware mounting kit,power distribution unit and glass door and lock., supply installation testing and commissioning of full hdprofessional display panel, 55 inch suitable for 16x7operation with 3hdmi inputs, necessary hdmi cable, allmounting accessories and making good the damages oninstallation if any., supplying and laying 10meter hdmi cable conforming torelevant standards and giving connection from nvr tomonitor with all required accessories., supplying and fixing of following sizes of medium class isicertified pvc conduit along with accessories in surface/recess including cutting the wall and making good thesame in case of 18recessed conduit as required.20 mm., supplying and fixing of following sizes of medium class isicertified pvc conduit along with accessories in surface/recess including cutting the wall and making good thesame in case of recessed conduit as required 25 mm, supplying and drawn of utp 4pair cat 6 frls lan cable inthe existing surface /recessed steel/pvc conduit as required1 run of cable, supply and laying of 6core unarmoured single modeoptical fiber cable including fiber testing, splicingcharges and labeling., supply and laying of industrial grade taut/stay wire as asupport for ofc/ armoured cable., supply and configuration of 1kva line interactive ups withminimum168vah inbuilt battery.