Latest hardware material Tenders | Government hardware material Tenders

Central Government And Public Sector

CTN :45303917

08 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply,installation,commissioning, of hardware materials router,switch,media converter, lan extender with 3 years maintenance at various locations in tamil nadu,pondicherry from the bsnl empaneled system integrator for bsnl eb customer

corporations/Associations/Others

CTN :45377326

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply and services of i&c hardware material

CTN :45363413

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels

CTN :45343672

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of electronics and communication engineering practices (equipment) - equipments for electronics and communication engineering practices:, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) cpu -lpc2148, core -16/32 bit arm7tdmi-s speed -max 60 mhz, flash -512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converterwith 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, ask modulation and demodulation kit message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter):input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency: tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection with doordarshanfree channels. free-to-air channel demonstration.

CTN :45321631

08 Jun, 2026 NA

Patiala - Punjab

Tender For supply of wood, hardware, material and glass panes of quarter no. c-02

CTN :45291856

12 Jun, 2026 19.00 Lacs

Bathinda - Punjab

Tender For supply of supply of chdh structural items and all other specification as per rfp , supply of chdh building material and hardware material and all other specification as per rfp , supply of chdh electrical and earthing items and all other specification as per rfp , supply of chdh plumbing and sanitary items and all other specification as per rfp , supply of chdh lighting protection and furniture items and all other specification as per rfp , supply of chdh water storage tank and soakage wall items and all other specification as per rfp

State Government

CTN :45303641

15 Jun, 2026 49.83 Lacs

Ramgarh - Jharkhand

Tender For procurement of hardware materials for maintenance and spare for 400kv transmission line.

CTN :45285879

03 Jun, 2026 NA

Patiala - Punjab

Tender For supply of painting and hardware material for research scholar flat no. 10 at pup commercial plywood app. 5-6mm thick 6' * 3, glass panes 4mm thick 4' * 2', wire netting app. 22 * 12 gauge, black nails 3/4 ^ prime prime, m.s. screw 1 1/2 ^ prime prime (100 pc pkt), iron door spring, oil bound distemper (10 kg), lime (10 kg bag), s/e light grey paint (4 ltr), t.t. oil (1 litre), painting brush 4", painting brush 3", s/e oxford blue paint (1 ltr)

CTN :45203470

06 Jun, 2026 5.00 Lacs

Gwalior - Madhya Pradesh

Tender For supply of furniture and hardware materials tender at jiwaji university, gwalior

CTN :45282006

10 Jun, 2026 23.00 Lacs

Bathinda - Punjab

Tender For supply of ojls structural items and all other specification as per rfp , supply of ojls building material and hardware material and all other specification as per rfp , supply of ojls electrical and earthing items and all other specification as per rfp , supply of ojls plumbing and sanitary items and all other specification as per rfp , supply of ojls lighting protection and furniture and solar system items and all other specification as per rfp , supply of ojls water storage tank and soakage wall and septic tank items and all other specification as per rfp , supply of tools and plant and all other specification as per rfp

Hardware Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

State Government