Latest hbc fuse Tenders | Government hbc fuse Tenders

CTN :45708597

03 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of 200 amp.hbc.fuse.link with central teg (2 hole fixing bolted) confirming to is: 13703 (part2/sec2) of 1993 or latest specn: 13703 (part2/sec2) of 1993 or latest [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45708561

20 Jul, 2026 NA

Multi City - Multi State

Tender For set of items consist of four item 1. fuse carrier (for d type hbc fuse sys.) 500 vac 250 vdc cat no. fc-25 make-viral controlgears or similar qty-02 no/set. 2. fuse carrier (for d type hbc fuse sys.) 500 vac 250 vdc cat no. fc-63 make-viral controlgears or similar qty-01 no/set. 3. dz single pole base (for d type hbc fuse sys.) (panel mounting) 500 vac 250 vdc cat no. sppm-25 make-viral controlgears or similar qty-02 no/set. 4. dz single pole base (for d type hbc fuse sys.) (panel mounting) 500 vac 250 vdc cat no. sppm-63 make-viral controlgears or similar qty-01 no/set. warranty period 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45328530

06 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : procurement of 11kv solid core insulators for hg fuse sets

State Government

CTN :45539112

30 Jun, 2026 2.40 Crore

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of lt three phase hg fuse sets with polymer insulators

State Government

CTN :45539113

30 Jun, 2026 2.54 Crore

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of 11kv three phase hg fuse sets with polymer insulators

Trust

CTN :45679919

29 Jun, 2026 NA

Katra - Jammu And Kashmir

Tender For supply of miscellaneous electric items - steel tubular 9 mtr. long pole (st-410 sp33) , acsr weasel conductor 6/1/2.59 mm , 11 kv go, ab switch 3-phase, 3-pole, 200 amp vertical type with rod heavy duty , back clamp for 9 mtr. pole with fitting , 11 kv horn gap fuse set (hg set) 3-phase 400 amp polymer type heavy duty , la set station type (gapless surge arrestor, 9kv, 10 ka, la with polymer housing station type heavy duty) , xlpe pvc cable single core 300 mm sqr. (300 sq mm cable 1.1 kv grade, pvc insulated standard conductor frls type) , 11 kv polymeric pin insulator 12 kv, 5 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm , insulator disk 11 kv (11kv polymeric composite discs insulator with pin and gl fittings, 12 kv, mainfalling load 45 kn, lighting impulse 75 kv positive and 80 kv negative, creepage distance 320 mm) , channel 100.00 mm x 50.00 mm x 5.00 mm (10 feet long) , nut bolt full thread with washer 4"/6" heavy duty , wedge connection / pg clamps , danger plate and clamps , g.i. bracket wire for anti climbing , 3 phase 4 wire trivector meter with ct/pt unit , aluminium thimble 185 mm , lv distribution box for 400 kva dtr with mccb for incomer & sfu's for outgoing circuits , stay set (gi rod with clamp) - galvanised stay set with 50x8mm stay clamp, gav. insulator (02 nos.) anchor plate (200x200x6mm) nut-bolt 2 nos. turn-buckles, 1.8 m long 16 mm diameter solid g5 stay rod & 7/3. 15 mm dia gi standard wire complete , g.i. guy rod complete with clamp and insulator , anti climbing device with clamp , guy / stay wire 7/14, galvanized steel, typically hot-dip zinc-coated for corrosion resistance , giv cross-arm with top bracket and gi channel-arm including clamp (gi v cross arm with top bracket including clamp and gl channel x-arm including clamps and braces) , channel 75 x 75 x 6mm (10 feet long) , g.i. earthing wire 8/10 mm

CTN :45620992

30 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of electrical work - miniature circuit breaker make: havels/siemens/l&t/bch/schneider, 32 amps, 2 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 32 amps, 3 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 63 amps, 3 pole mcb with metal enclosure, for power load circuits, 415v ac, type c or d tripping, is/iec 60898 standard, overload and short circuit protection., 16 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 20 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., mcb rail 1 meter long., l&t make thermal overload relays (olr), l&t make, thermal overload relay olr: model- mn-5, adjustable 30-50 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 45-75 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 20-33 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 14-23 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1, star delta electronic timer, make : gic or l&t or selec, adjustable time range 0.1-60 sec, multifunction, din-rail mount, 2 no+2 nc, led status indication, wide voltage range 230/420 v ac, 50 hz, iec 60947-5-1 compliant., 2 a. hbc fuse - 415 v. a.c., model: ns2, 32 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., 63 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., fuse wire 16 a. 100 grams pack, fuse wire 32 a. 100 grams pack, fuse wire 63 a. 100 grams pack, dowel make aluminium lugs: (ring type), 35 sq.mm, 70 sq.mm., 95 sq.mm., 120 sq.mm., 150 sq.mm, dowels make copper lugs: (ring type), 4 sq.mm. - hole dia 5mm, 6 sq.mm. - hole dia 8mm, 10 sq.mm. - hole dia 8mm, 25 sq.mm. - hole dia 10mm, 1.5 sq.mm. u-lug (kompress fork type), high-grade porcelain/ceramic heavy-duty industrial pendant holder suitable for a type of bc (bayonet cap) with pin-type contacts, make: crompton/philips/havells/bajaj, 230v, 100w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and long-lasting performance., 230v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, efficient lighting, and extended service life., 24v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and durable performance, 22 watts, batten type, 4 feet led tube light - make: isi standard, 230 v. ac 50 watts led flood fitting., 230 v. ac 100 watts led flood fitting., 230 v. ac 150 watts led flood fitting., 3/4 inch wide pvc insulation tape, flame-retardant, moisture-resistant, and suitable for electrical insulation-10 mtrs roll, 1-inch wide fiber glass tape, high-temperature resistant, non-conductive & suitable for electrical insulation and cable wrapping- 50 mtrs roll, 250 w, mercury vapour lamp, screw type, clear/coated, 230 v ac, 50 hz, standard base (e27/e40), suitable for outdoor/indoor lighting applications.

State Government

CTN :45655455

14 Jul, 2026 NA

Garhwa - Jharkhand

Tender For procurement of spare material for relay panel and power transformer at 132/33 kv grid sub station japla - local remote (l/r) switch for circuit breaker (make - kaycee/salzer/switron), spring charge motor for 33 kv v.c.b. (as per sample), selector switch for protection transformer, 25a, ac/dc, 110v-660v or 5 pole 10 amp : (make - switron, kaycce), petrolium jaily, annucnciator facia with in built hooter (12 windows) make - minilec, model - mbas, as per sample., annucnciator facia with in built hooter (24 windows) make - minilec, model - mbas, as per sample., motor cut - off limit switch for 33 kv vcb (as per sample), true rms digital multi meter (waco/fluke/motwani/any equivalent isi), time delay relay, 240 volt (as per specification), mccb - 32a, 4 pole, 3p + 1n (make - seimens/schneider/abb equivalent , mccb - 63a, 4 pole, 3p + 1n (make - seimens/schneider/abb equivalent ., mcb - 10 a single pole (as per sample), power contractor for transformer cooling fan 3 ph. coil 220v ac 3 pole (1 no. 1 nc) as per sample., silica gel (blue mesh) size - 6mm to 10mm, hcd, 400a - 415v / (acdb-hbc fuse) as per sample, htss-63a (a3) 415v (acdb-hbc fuse) as per sample, digital earth resistance testor complete set make - kusum, meco/metravi etc., wti for 132/33 kv, 20 mva, power transformer, oti for 132/33 kv, 20 mva, power transformer, led indicating lamp (red, yellow, blue, green)

State Government

CTN :45662446

30 Jun, 2026 NA

Multi City - Karnataka

Tender For tender enquiry for supply and commissioning of gos system materials for the existing gos structure at kapl factory - supply and installation of 11 kv 400a gang operating switch (gos) with operating (03 no’s), supply and installation of 11 kv hg fuse unit (03 no’s), supply and installation of lightning arrester (03 no’s), supply and installation of coyote conductor with alkathine tube, supply and installation of lugs, pg clamps and hardware materials, 2000 kva & 1250 kva transformers rust removal and painting, 2000 kva & 1250 kva transformers bus duct painting, gos structure rust removal & painting, transformer, bus duct and cable input/out-going naming, supply of efficacy 11 kv earth discharge rod with copper cable 6, meters length frp insulated make:-kusuma

corporations/Associations/Others

CTN :45263412

04 Jul, 2026 NA

Pudukkottai - Tamil Nadu

Tender For corrigendum : supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure p

Hbc Fuse Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors