Latest hdpe joints Tenders | Government hdpe joints Tenders

CTN :45138827

28 May, 2026 NA

Barmer - Rajasthan

Tender For supply of supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc

State Government

CTN :45118210

18 May, 2026 1.50 Lacs

Barmer - Rajasthan

Tender For supply for hdpe joints 110 mm

State Government

CTN :45118211

18 May, 2026 1.50 Lacs

Barmer - Rajasthan

Tender For supply for hdpe joints 90 mm

State Government

CTN :45118212

18 May, 2026 1.50 Lacs

Barmer - Rajasthan

Tender For supply for hdpe joints 75 mm

State Government

CTN :45108272

14 May, 2026 26.36 Lacs

Mumbai - Maharashtra

Tender For special repair to rc to bldg. known as khaparidev sadan in f/s ward-providing waterproofing treatment to overhead water tank and drainage arrangement and r.s flooring and attending leakages to pvc pipe and gi pipe.

Central Government / Public Sector

CTN :45117449

14 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of ioh replacement kit for new 22cb loco schneider make vcb sl.no. mfr38246 ioh replacement kit-22cb qty 1 nprm515001 0 poppet valve 1 2 nprm539010 0 molecular sieve(4kg/nos) 1 3 nprm551016 2 sealing strip 1 4 nprm551039 0 o-ringlsc:612/3 rev-a 1 5 nprm551045 0 selon washer (nylon) 1 6 nprm551049 0 filter element for air filter 1 7 nprm551081 0 gasket washer 1 8 nprm554002 3 piston seal 1 9 nprm5570050 piston seal 1 10 npsf5540030 damper assy 1 11 mfr14533 repair kit for magnet valve 1 12 nprm223026 0 pvc tropicalised gasket,2d 527156b 0.3 13 nprm511060 0 repair kit for air filter 1 14 npsc5150020 valve disc lsc-99/1 rev-a 2 15 nprm551016 3 sealing washer for 22cblsc-612/6 rev-a 8 16 nprm551098 0 plastic washer, legris pt no 0602231120 8 17 nprm551103 0 grommet for cylinder 2 18 nprm551109 0 m6 x 20 partialthreaded screw 8 19 nprm551111 0 retaining washer for 22cblsc-826 8 20 nprm554006 0 special washerlsc-554 rev-a 1 21 nprm557008 0 o-ringlsc:/4 2 22 nprm557009 0 o-ringlsc:612/2 rev-a 1 23 nprm557010 0 o-ringlsc:612/1 rev-a 1 24 nprm557011 0 o-ringlsc:612/5 rev-a 1[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :45087022

13 May, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of others - pvc scrap consisting of materials such as 1] pvc door shutters (damaged) - 286 nos, , 2] pvc water tank 500 litres capacity - 4 nos, 3] pvc tap 15 mm - 81 nos, 4] pvc pillar tap - 6 nos, 5] pvc water tank 1000 litres capacity - 13 nos, 6] pvc water tank 1500 litres capacity - 1 no., 7] pvc water tank 2000 litres capacity - 5 nos, and pvc scrap with/without minor ferrous attachments as is where is basis. [released/condmened] - total qty : 4.800 mt. custodian : sr. section engineer/works/nagercoil, location : inside old and new office compound of sse- works-nagercoil [ncj]., s.1539 no. 593532 dtd.10.10.2025, note- delivery to be made on actual weighment basis. special conditions - 1] segregation is not permitted. 2] jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/ disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 3) forfeiture of bsv payment along with emd - in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. 4) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : - 1] materials such as ms, stainless steel, gi pipes if any available nearby to be taken as nfs., 2] any other items identified other than items in the description, the same shall be handed over to custodian. [pl no. 98417265, hsn code : 39153090, gst : 5% on fcm], item : actual weighment pvc items. [image attached].

Central Government/Public Sector

CTN :45072408

25 May, 2026 NA

Ahmedabad - Gujarat

Tender For supply of carpentry items - mosquito net - wire netting - ss 304 - 3 ft x 50 ft long , mosquito net - wire netting - ss 304 - 4 ft x 50 ft long , 75 mm dead lock brass 6 leaver , cupboard lock 6 lever 75mm x 50 mm , magnet-pvc , pivot-set-ss - 6 inch , door closer , silicone sealant clear - 280 ml , plywood sheet - 6 mm comm. isi mr 8x4 sqf , plywood sheet-12 mm comm. isi mr 8x4 sqf , plywood sheet - 18 or 19 mm - comm. isi mr , m s bolt with nut size - 0.25 inch x 2.5 inch , special ghana teak wood patii-3 inch x 1.5 inch , screw- steel wood-19 x 6 , screw-sheet metal- 19 x 5 , screw-sheet metal- 19 x 4 , screw-steel wood-35 x 8 , screw-steel wood-45 x 8 , screw-steel wood-60 x 8 , g. i. wire nails - assorted sizes

CTN :44778381

11 May, 2026 NA

Netanar - Chhattisgarh

Tender For corrigendum : supply of networks cables and special cables for nsl d d - 1700070135 cable tps 0.0 0.0 0.57 4 bare un , 1700265541 cable profibus dp 2 . 0.2 app , 1700265600 pass n w comp ofc cable opt 12 singl , 1700205333 cable lt pwr 1 0.6 3.5 st un pvc 4 , 1700205120 cable lt pwr 1 0.4 2.5 co un xlpe 4 , 1700204279 cable ctrl 0.5 0.3 1.5 co un pvc 35 , 1700205088 cable ctrl 0.5 0.3 0.7 co un tpe 24 , 1600249559 cable ctrl 0.3 0.05 0.2 co un tpe 6 , 1600033179 ofc cable 6c single mode , 1700204258 cable ctrl 0.3 0.3 0.5 ba un high 8 , 1700204177 cable ctrl 1.1 0.44 2.5 ba un low 4 , 1700204196 cable ctrl 1 0.6 1.5 ti un varp 1 , 1700204335 cable ctrl 0.3 0.3 0.5 ti un tpe 4p , 1700195314 cable ctrl 0.5 0.3 4 co un tpe 4 , 1700204188 cable ctrl 1 0.3 1.5 co un tpe 18 , 1700010142 cable sign 0.6 1 2 p anne ar , 1700010147 cable sign 0.6 1 4 p anne ar , 1700010379 cable sign .6 1.5 3 anne ar , 1700010380 cable sign .6 1.5 5 anne ar , 1700010388 cable sign 1.1 1.5 7 anne ar

State Government

CTN :44231929

14 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

Hdpe Joints Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors