Latest hdpe fitting Tenders | Government hdpe fitting Tenders

Central Government/Public Sector

CTN :45363575

26 Jun, 2026 40.00 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : certain repair to flooring tiling, chajja repair and plastering plinth protection rain water pipes roofing joineries plumbing including w/s and sanitary appliances etc and allied works at zone a area of age b/r-i under ge (east) lucknow

CTN :45415159

22 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

CTN :45598153

25 Jun, 2026 41.00 Lacs

Sonipat - Haryana

Tender For repair/ installation/ maintainance/ providing and fixing of pvc pipes, ipb tiles, culvert/ pulia/ crossing , rcc slabs, drain type i and ii or any miscellaneous work of development in ward no 13 mc kundli

CTN :45598155

25 Jun, 2026 42.79 Lacs

Sonipat - Haryana

Tender For repair/ installation /maintainance/ providing and fixing of pvc pipes, ipb tiles ,culvert/pulia /crossing , rcc slabs, drain type i and ii or any miscellaneous work of development in ward no 10 mc kundli

CTN :45598168

25 Jun, 2026 42.74 Lacs

Sonipat - Haryana

Tender For repair/ installation/ maintainance/ providing and fixing of pvc pipes,ipb tiles, culvert/ pulia/ crossing ,rcc slabs,drain type i and ii or any miscellaneous work of development in ward no 9 mc kundli

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

CTN :45359599

20 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras supply of relay valve assembly service kit , pressure line hose pipes set , pressure boot assembly repair kit , pressure boot seals , the above mentioned engine pressure system over , bs iii radiator assembly , inter cooler repair , coolant plastic dat mtd single cap , radiator hose pipe , the above mentioned engine cooling system over hauling , bs iii break booster assembly , break adjuster yoke assembly , break master cylinder repair kit , the above mentioned break booster repair remove the all , clutch master cylinder assembly , the above mentioned clutch and gear over hauling repair , chain bracket assembly , chain bracket socket bearing , chain bracket cuts rubber , wheel bearing , the above mentioned mc over hauling repairs removes , head gasket kit , gear shifter and assembly , gear shifter and assembly lh rh , gear lever knob , gear lever without bu , gear lever plate , the above mentioned gear box remove and check the , shock absorber assembly , the above mentioned shock absorber remove and check , kilometer head assembly , the above mentioned kilometer head assembly remove

Central Government/Public Sector

CTN :45216831

06 Jul, 2026 48.53 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : special repair to toilet and leakage/seepage, external plaster, drain pipes and connected items in certain bldgs of 13 jak rif and 115 inf bde camp loc at morar cantt gwalior

corporations/Associations/Others

CTN :45582779

20 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap staff car tyre,scrap rubber tube pices,scrap rubber goods ( hose pipes, brake hose, etc.),scrap l.t.wire,scrap seat cussion with rexine,scrap m.s.savings,scrap fuel / broken pipes,scrap card board cartoon,scrap safe,scrap cash box steel,scrap steel side racks,scrap auto electricals parts,scrap plastic pices.,scrap electrical goods assorted,scrap sectional tyres repair mold,scrap starter assy. (auto ),scrap altonator assy.,scrap hydrolic troly jack 5 ton,scrap bottol jack,scrap mechanic jack,scrap centry fugal motor pump without etc. motor,scrap rubber envelop,scrap oil pump,scrap grease pump buket,scrap audio instruments,bs-ii and bs-iii air filter primary,bs-ii and bs-iii air filter secondary,scrap bs-vi air filter primary,scrap bs-vi air filter secondary

State Government

CTN :45572573

24 Jun, 2026 NA

Chakan - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat khalumbre tal khed dist pune - supplying and erecting modulartype switch6a / 10a, supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length, providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in, supplying and erectingled street light fitting suitable for 36w to 40w led street light, including lamp, with pf > 0.95 class ip 65 ., supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95,class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg. with driver, oprator and disel etc. for per day basis, labour chrages for led fitting on street light or ms light pole., dismentaling charges -led street light of pole., 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying & laying armoured cable 4c x 6 sq.mm., supplying & laying armoured cable 4c x10 sq mm, supplying & laying armoured cable 2c x 10 sq mm, supplying & laying armoured cable 4c x 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm complete , supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials. 4-4-3, supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole., supplying and erecting mains with isi mark wp2 x 6 sq. mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no. 8 swg 1-4-3, supplying and erecting mains with isi mark wp2 x 2.5 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying and erecting mains with isi mark wp2 x 10.00 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq. mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box for mcb, big size frp box for mcb, supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes(dwc) of hdpe for enclosing cable below ground/road surfac

Hdpe Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government