Latest hdpe fittings Tenders | Government hdpe fittings Tenders

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

Central Government/Public Sector

CTN :45057400

01 Jul, 2026 NA

Duliajan - Assam

Tender For corrigendum : supply of 7 inch premium threaded casing , 7 inch casing cross over joint , casing pup joint api seamless steel , 7 inch premium threaded casing grade q125 , 7 inch od q125 casing coupling , 7 inch od q125 casing short joint , 7 inch od q125 casing cross over joint , casing 7 inchx29 ppf xp 110btc coupling sc , casing short joint 7 inch 2 mtr long

Central Government/Public Sector

CTN :45469206

08 Jul, 2026 NA

Duliajan - Assam

Tender For supply of tubing 2pt 7by8 inch , x over 2pt7by8 inch vamtop box , cross over prem box x vamtop pin , cross over prem box x api eue pin , cross over vam top pin 3pt 1by2 inch , pup joint 2pt 7by8 inch prem 3foot , pup joint 2pt 7by8 inch prem 10 foot , pup joint 2pt 7by8 inch prem 12 foot

CTN :45251026

10 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of industrial helmet material: high density polyethylene (hdpe) fittings: adjustable chin strap and rat

Central Government/Public Sector

CTN :45063792

25 May, 2026 NA

Ernakulam - Kerala

Tender For corrigendum : supply of high pressure flowline components c c - 3 inch hammer union fig 1502 bw aisi 4130 , 3 inch blind cap fig 1502 aisi 4130 , 2 inch fig 1502 hammer union bw aisi 4130 , 2 inch fig 1502 longsweep elbow m x m , 2 inch fig 1502 longsweep elbow m x f , 2 inch fig 1502 45 deg lateral m x f x f , 2 inch fig 1502 longsweep elbow f x f , 2 inch fig 1502 elbow m x f aisi 4130 , pup joint 2 inchx2 inch fig 1502 mxm length 8 inch , pup joint 2 inchx2 inch fig 1502 mxf length 8 inch , pup joint 2 inchx2 inch fig 1502 fxf length 8 inch , pup joint 2 inchx2 inch fig 1502 mxm length 12 inch , pup joint 2 inchx2 inch fig 1502 mxf length 12 inch , pup joint 2 inchx2 inch fig 1502 fxf length 12 inch , 3 inch x 2 inch fig 1502 90 deg elbow m x f , 3 inch x 2 inch fig 1502 90 deg elbow f x m , 2 inch x 2 inch fig 1502 elbow ls style 30 fxm , 2 inch x 2 inch fig 1502 elbow ls style 100 fxm

CTN :45179315

03 Jun, 2026 NA

Khorda - Odisha

Tender For providing of custom bid for services - service contract for replacement of 36 inch mainline sv valve and repair of 36 inch weld joint at sv 04 dapl 36 inch weld joint defect repair byreplacement with pup piece

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

Central Government/Public Sector

CTN :44208112

13 May, 2026 NA

Duliajan - Assam

Tender For corrigendum : supply of 7 inch prem threaded casing grade l 80 type 13cr , casing pup joint api seamless steel , casing cross over joint , casing cross over joint api seamless steel , coupling for 7 inch casing

CTN :44793624

13 Apr, 2026 4.19 Lacs

Multi City - Telangana

Tender For corrigendum : purchase of leakage materials for arrasting all leakage in yellandu municipality under dmft grant - tbsc-q.vi-11 :fast setting cement based plugging compound , "centrifugally cast (spun) ductile iron fittings conforming to is:9523/2000 having dimensions as per table. the rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) ( ex-works) excluding transportation and taxes. for double socket branch flange tee, all socket tees, reducers, flanged sockets, flanged spigot, double socket duck foot bend, double flange duck/foot bend, all socket cross, all flange tee, all flange cross, double flange reducer, blank flange, mechanical joints, double socket bends, double flanged bends etc." , "centrifugally cast (spun) ductile iron fittings conforming to is:9523/2000 having dimensions as per table. the rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/is 9523/2000) ( ex-works) excluding transportation and taxes. for double socket branch flange tee, all socket tees, reducers, flanged sockets, flanged spigot, double socket duck foot bend, double flange duck/foot bend, all socket cross, all flange tee, all flange cross, double flange reducer, blank flange, mechanical joints, double socket bends, double flanged bends etc." , supply and delivery of rubber packing excluding all taxes , supply and delivery of rubber packing excluding all taxes , tbsp-j.iii-58:supply of 32mm ppr elbow conforming to din standards 8077/8086 , "tbsp-j.iii-64:supply of 110mm ppr elbow conforming to din standards 8077/8092" , "tbsp-j.iii-54::supply of 90mm ppr core flange conforming to din standards 8077/8091" , "manufacture, supply and delivery of unplasticised pvcs pipes for potable water supplies conforming to is : 4985/2000 (3rd revision) with bell ends (socket) as per specification in light grey/natural ivory grey/ any other color (except white) inclusive of transportation to the sub-divisional stores anywhere in tg excluding taxes." , 110 mm dia 6.0 kg/sqm , 125 mm dia 6.0 kg/sqm , 160 mm dia 6.0 kg/sqm , 220 mm dia 6.0 kg/sqm , "manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes." , reducers od 110 mm x 125mm , reducers od 200 mm x 225 mm , elec-11.7.5.1:supply, fixing, testing & commissioning of ------ c.i. gate valves os &y as per is:14846 ( pn 10 rating) and rising spindle type with flanges, bolts, nuts,washers, gaskets etc. the valve shall be fitted with chain lock and key arrangement . , elec-11.7.5.1:supply, fixing, testing & commissioning of ------ c.i. gate valves os &y as per is:14846 ( pn 10 rating) and rising spindle type with flanges, bolts, nuts,washers, gaskets etc. the valve shall be fitted with chain lock and key arrangement .

Hdpe Fittings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector