Latest hdpe tee Tenders | Government hdpe tee Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

State Government

CTN :43056417

10 Dec, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For s and e led street light fitting on 6mr gi pipe pole (doule fitting set ) in anucuchitjati wasti at kanchanapur gp pimpalkhuta tq. district chhatrapati sambhajinagar

State Government

CTN :43053463

09 Dec, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting led street light fittings on 6 mtrs, g.i.pipe pole double fitting sets in anu jati wasti under sc and nav bouddha locality development programme year 2025- 26 at.pendapur tq.gangapur dist. chhatrapati sambhajinagar

State Government

CTN :43080015

12 Dec, 2025 9.15 Lacs

Kargil - Jammu And Kashmir

Tender For providing/ laying and fitting of pipe for re-alignment of mohallah including coverage of new habitats of thuina under the up-gradation/ retrofitting of wss kamutul thuina (under jjm).

State Government

CTN :43084201

15 Dec, 2025 3.86 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For providing lowering laying aligning and fitting of 40mm dia hdpe pipe at youlkham wss chamshen charasa under jjm

Central Government/Public Sector

CTN :43085390

27 Dec, 2025 50.00 Lacs

Saharanpur - Uttar Pradesh

Tender For repair/maint of di gi pipe line, bore well and other connected items, repair/ replacement of internal electric wiring, light fitting and fixtures in md and otm accn and repair/maint of hangers, weather shelter lights and other connected items at af s

CTN :43062227

15 Dec, 2025 NA

Barmer - Rajasthan

Tender For supply of western type ewc with cistern , wash hand basin , sintex tank 200 ltr , looking mirror , tyre outer 7. 50-16 , pressure switch , chemical for water filtration , blue pipe fitting elbow brash mta fta , replacement of ro membrane , mcb db 8way , tyre outer 7. 50 16 , tube inner 7. 50 16 , led bulb 10w , mcb 32 amp , led tube light 2 ft long 20 watt , exhaust fan , stop cock 15mm , diesel filter , diesel pipe , 3inch hose clamp , 3inch pvc suction pipe , 3inch butter fly valve , cement , tyre size 10. 00. 20 , tube inner 10. 00. 20 , flap rust 10. 00. 20 , ceiling rose , cable pvc single core 1. 5 sqmm , switch one way 5 amp sp , tube inner 9. 00 20 , pvc cable single core 4 sqmm , tube inner 8. 50 16 , tyre 6. 00 16 , tube 6. 00 16 , genr trailer hub , alternator core 30 kva , self-starter , bty 12v 130 ah , avr , pvc wire 1. 5 sqmm , fuel cut off solenoid , distilled water , change over switch 100 amp , alternator core 62. 5 kva , mcb 16 amp sp ) /bid number: gem/2025/b/6966825 * /dated: 04-12-2025 & & / bid document1 / 36

CTN :43053400

10 Dec, 2025 NA

Mumbai - Maharashtra

Tender For various works in pig slaughter unit for additional slaughtering activity to existing unit and emergency pig slaughter unit during x mass festival at deonar abattoir. - various work in pig slaughter unit for additional slaughtering activity to existing unit and emergency pig slaughter unit during x mass festival at deonar abattoir., standard extra large industrial type fly killer with m.s. body, 2 x 40w tubes and approx. area covered: 2500 - 3000 sq.ft., exhaust fan of 600mm sweep, 700rpm, with 4800 cfm free air delivery, ac 415v , 50 hz, three phase complete with all necessary accessories for completing installation, sitc of t-5 (22w x 50 nos) at pig-pens & slaughter area including point wiring 1.5sqmm with cpvc black 25mm pipe fitting., providing & fixing of green net heavy gsm for pig slaughter area.(5000 sqft), providing & fixing of green net heavy gsm for pig pens area.(4000 sqft), work of fabrication and repairing of railings with ms net area (1200 rft), work of fabrication and repairing of fencing unit in (konwada pens) area 1750 sqft., work of fabrication and repairing of gates (size : 4x4, 3x3 & 4x3 & 3x2 ft), work of removing old fencing jali and fabrication providing and fixing of new jali in pig slaughter unit, painting work for all fabricated structure railings, fencing pens and slaughter area with on coat of red/yellow oxide and two coat of black/yellow enamel paint as per department specifications., work of surfacing, repairing, filling and minor civil work to pig unit pens and near pig slaughter unit.

CTN :42508959

08 Dec, 2025 4.30 Lacs

Sundergarh - Odisha

Tender For corrigendum : providing of custom bid for services - fitting of restriction orifice plates in 800 nb idct riser pipe line

CTN :43063608

12 Dec, 2025 16.87 Lacs

Nagpur - Maharashtra

Tender For providing, painting and repairs in pipe line, carpentry work sanitary fitting and repairs in flooring at qtr no. 69,70 type ii building no. 5, ravinagar, nagpur. (only for society).

Hdpe Tee Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector