Web Analytics Made Easy - StatCounter

Head Light Holder Tenders

Get complete information related to latest Head Light Holder Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Head Light Holder Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Head Light Holder Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45713130 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For supply of supply laying testing and commissioning ug cable xlpe , material and labour for cable jointing kit end joint for 11 kv , excavating in trenches in hard dense soft soil n exc 1.5 m wide , removing excavated material to a distance not exceeding 50 mtr , returing filling in including spreading levelling watering , material and labour for sand cushioning 8 cm before laying ht lt , material and labour for un- reinforced precast concrete cable , supply and fixing pin type porcelain vitreous white , supply and fixing disc type insulator porcelain vitreous , taking down and supply and fixing acsr conductor , material and labour for earth continuity conductor

CTN :45551266 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

CTN :45691130 Due date: 16 Jul, 202616 Jul, 2026 42.36 Lacs
Tender For supply of consolidated requirement of electrical and other hardwares for nec - 40 w 220v 4 feet led tube light with fitting , 30 watt led street light luminaries with fittings , 18 w 220v 4 feet led tube light with fitting , 50 w led outdoor type flood light fitting outdoor type ip 65 , 200 watt led flood light luminaries with fittings , 70 watt led street light luminaries with fittings , 20 w 220 230 volt led bulb , 14 w 220 230 volt led bulb , 1.5 sq mm pvc insulated single core copper cable , 2.5 sq mm pvc insulated single core copper cable , 4 sq mm pvc insulated single core copper cable , 4 sq mm pvc insulated 2 core aluminium wire , 6 sq mm pvc insulated 2 core aluminium wire , 10 sq mm pvc insulated 2 core aluminium wire , pvc board 3 inch by 3 inch , pvc board 4 inch by 4 inch , pvc board 8 inch by 6 inch , pvc board 4 inch by 7 inch , pvc board 10 inch by 8 inch isi marked , pvc insulating tape 20 mm , cable vulcanising tape good qyality , silk tape h t grade good quality 20mm by 50 mtr , insulating varnish 3 .3 kv grade good quality , hot pouring compound 3 . 3 kv grade good quality , cold pouring compound 3. 3 kv grade good quality , empire tape 20mm by 50mtr , h t tape 11kv grade , cotton tape ht grade 20mm by 50 mtr , capacitor 42 mfd 230volt ac isi marked , capacitor 2.5 mfd isi marked iec standard , capacitor 10 mfd isi marked iec standard , mcb c series 10a sp with enclosure , mcb c series 20a,dp with enclosure , mcb c series 32 a dp with enclosure , mccb 32a dp 415v with enclosure , mccb 63a dp 415v with enclosure , mccb 160a 4 pole 415v with enclosure , mccb 630a dp 415v with enclosure , 16 amps 230 volts icdp main switch , 32 amps 230 volts icdp main switch , ictp main switch 415v 16 amps , ictp main switch 415v 32 amps , ictp main switch 415v 63amps , ictp main switch 415v 100 amps , ictp main switch 415 200amps , shackel insulator for 440v , lt pin insulator good quality well polished with pin porcelain , disc insulator 11kv grade , 3.3 kv pin insulator with pin and bolts , shackele insulator 3.3 kv grade,with bolt and strip , gut or stay insulator 11kv grade , 6 mm empire sleeve , 16 amps tumbler switch 230 volt , step type electronic fan regulator , 5 amps 5 oin flush type 5.5 combined isi marked ip 20 , 5 or 15a flush type s s combined isi marked ip 20 , s a 3 pin top , 15 a 3 pin top isi marked heavy duty , pendent holder good quality durable heavy duty , wood screw percentage , wood screw1.1 by 2inch , batten holder straight type , lighting arrestor 11 kv , 11 kv fix contact for goab switch , pneumatic timer coil 415v , timer set complete assy 415v , cable terminal kit 11 kv grade , cable terminal kit 3.3 kv grade , hand gloves 11 kv grade , 3 pole power contactor 32a ml2 type coil voltage 415v 2 no plus 2nc , 3 pole power contactor 40a ml3type coil voltage 415 2no plus 2nc , 3 pole power contactor 70a ml4 type coil voltage 415v 2no plus 2nc , 3 pole power contactor 450acoil voltage 415v 2no plus 2nc , 3 pole power contactor 200a ml10 type coil voltage 415v 2 no plus 2nc , spare contact kit for 3 pole power contactor 40a ml3 , spare contact kit for 3 pole power contactor 70a mla , spare contact kit for 3 pole power contactor 200a ml10 , acsr ferret conductor , acsr squirel conductor , exhaust fan 230v 300 mm , 5 by 6 amps 5 pin flush type socket , 5 by 6 amps flush type switch , 15 by 16 amps flush type socket , 15 by 16 amps flush type switch , ceiling rose , pvc plug 1 inch

CTN :45672394 Due date: 04 Jul, 202604 Jul, 2026 NA
Tender For supply of misc maint stores c c - nominal size of length 3 mtr , ms wire mesh 0.90 m x 30 m , ms wire mesh 1.20m x 30 m , ms wire mesh width 425 m dia 0.25mm , ms wire mesh width 150 m dia 0.071 mm , gi chain link fencing 3.15mm dia with binding wire , cpvc elbow 15 mm , cpvc elbow 20 mm , cpvc elbow 25 mm , cpvc elbow 40 mm , cpvc union 25 mm , cpvc union 40 mm , cpvc union 50 mm , upvc union 25 mm , upvc union 40 mm , upvc union 50 mm , upvc elbow 15 mm , upvc elbow 20 mm , upvc elbow 25 mm , upvc elbow 40 mm , upvc elbow 50 mm , upvc socket male thread 15 mm , upvc socket 15 mm , upvc socket 20 mm , upvc socket 25 mm , upvc socket 40 mm , upvc socket 50 mm , upvc socket 75 mm , upvc tee 20 mm , upvc tee 25 mm , upvc flange thread type with 4 hole 80 mm dia , upvc flange thread type with 6 hole 80 mm dia , upvc flange thread type with 4 hole 100 mm dia , upvc flange thread type with 6 hole 100 mm dia , cpvc tee 15 mm , cpvc tee 20 mm , cpvc tee 40 mm , cpvc tee 50 mm , cpvc tee 80 mm , pvc pipe 20 mm , pvc pipe 25 mm , pvc pipe 50 mm , pvc pipe 75 mm , upvc pipe 25 mm , upvc pipe 40 mm , upvc pipe 50 mm 6 mtr , upvc pipe 75 mm x 6 mtr , upvc pipe 80 mm , upvc pipe 110 mm x 6 mtr , solvent cement 100 ml , solvent cement 118 ml , bleaching powder , hanging system rectangular mirror , looking mirror 600 x 450x6 mm with pvc frame , pvc connection 15 x 300mm with brass union , pvc connection 15 mm x 450mm with brass union , pvc connection 15mm x 600 mm with brass union , pvc connection 15 mm x 750 mm with brass union , pvc waste pipe 32 mm dia and 750 mm for wbh , pvc swr pipe 160 mm dia , cp shower rose 75 mm , pvc shower rose 125mm , pvc float valve 20 mm with alum rod , pvc float valve 25 mm with alum rod , pvc elbow 25 mm , pvc elbow 50 mm , pvc tee 20 mm , pvc tee 40 mm , pvc tee 100 mm , tank lid cover , pvc water storage tank triple layer of 500 ltrs , pvc water storage tank triple layer of 1000 ltrs , cpvc tank nipple 25 mm , pvc tank nipple 20 mm , taflon tape , 25 mtr x 20 mm adhesive pvc tape , pvc gitti or rawl plug , knob for drawer with screw , nail wire gi 25mm , prelaminated particle board 8 feet x4 feet x20 mm , plywood bwr 6 feetx 3 feetx 12 mm , plywood bwr 8 feet x 4 feet x 4 mm , plywood bwr 8 feet x 4 feet x 6 mm , plywood bwr 8 feet x 4 feet x 12 mm , ply ost 8 feet x 4 feet x 4 mm , ply ost 8 feet x 4 feet x 6 mm , steel wood screw 50mm x 8g , tile guard paint , synthetic enamel paint olive green feet colour , synthetic enamel paint white colour , paint aluminium , obd white colour , exterior wall primer , exterior emultion gray paint , exterior emultion white paint , thinner , varnish in 1 ltr container , angle holder , modular bell push switch 6a , modular step regulator , fuse wire 5 amps , heating element 1500 watts , heating element 2000 watts , ic cut out 63 amps , led fitting box type 20 w , led fitting box type 40 w , mcb db 4 way , mcb db 8 way , mcb db 12 way , mcb db 16 way , pvc insulated copper cable 1 core 1.5 sqmm , cable joint kit lt of size 15 to 120 sqmm , cable joint kit ht of size 15 to 120 sqmm , insulation tape 20mm x 25 mtr , modular switch socket combination 6 or 16 a 6 pin , switch socket combination 15 or 16 amps 3 pin , switch socket combination 5 or 6 amps 3 pin , //bid details 2 / 133 thermostat for geyser 1.5 kv , thermostat for geyser 2 kv , syphone assembly for geyser 25 ltr , capacitor 2.5 mfd , capacitor 3 mfd , cable lugs 16 mm , cable lugs 50 mm , shackle insulator set of three , junction box 2 x 21 x11 cm , male moving contact ab switch , female fix contact 11 kv , dropout fuse set 11 kv , copper flexible jumper 11 kv , main switch 63 a dual pole single phase

corporations/Associations/Others

CTN :45659875 Due date: 22 Jul, 202622 Jul, 2026 3.50 Lacs
Tender For tender for supply of spare parts of tata bs4 and bs6 buses at rsrtc ajmer depot workshop - withdrawl plate tata bs iv, clutch lock huk type tata 1613, clutch fork patti assy tata 1613, clutch cone tata 1613, clutch fork setting bolt with pvc bush bs6, hose pipe clip ½", hose pipe clip 1", hose pipe clip 1 ¼", hose pipe clip ½" steel, hose pipe clip 1" steel, hose pipe clip 30/35 mm steel, hose pipe clip 40 mm steel, hose pipe clip 50 mm steel, hose clip tb-42, hose clip tb-44, hose clip tb-46, hose clip tb-48, hose clip tb-50, hose clip tb-54, hose clip tb-60, hose clip tb-84, front/rear spring center bolt with nut 10", rear spring center bolt with nut 12" tata 1613, lock bolt for shakle pin 1½ x 2¾, p.s. nut ½ bsf, p.s. nut ½ bsf nylon, p.s.bolt ½ bsf 1¾", rear hub lock bolt no.13, self stud with nut, turbo stud with nut, air tank drain valve nut, front wheel bolt tata 1613, rear wheel bolt tata 1613, wheel nut tata 1613, axle plate bolt tata m8x1.25x20, bolt 8 x 1.5 x 32, bolt half thread m8x50, bolt half thread m8x75, nut 8 x 1.5, bolt m10x1.5x30, bolt m10x1.5x45, bolt m10x1.5x50, cylencer bolt m10x1.5x125, nylon nut m10x1.5, bolt m12x1.5x45, bolt m12x1.5x50, nut m12x1.5, bolt m14x1.5x45, nylon nut m14x1.5, bolt m16x2x70, nylon nut m16x2, wedge screw tata with nut, water pump stud with nut 13 no tata bs4 (4" long), nut 13 no (flange / without flange), chamber nut 1613, axcelator rod end tata small type, axcelator rod end tata big type, axcelerator cable tata bs 3rd, kilometer gear set pvc set of 2 pcs, accelerator spring tata bs 3rd, battery terminal +ve / -ve, dimmer switch, electronic flasher 24 v, fuse 10 amp, fuse 15 amp, fuse 20 amp, fuse 30 amp, fuse 40 amp, fuse 400 amp, head light holder 3 pin type, head light holder of h-11 bulb, back light holder bs6, head light switch, wire 4 mm (1 roll=25 meter), wire 6 mm (1 roll=25 meter), wire 8 mm (1 roll=25 meter), v.c tape roll, push pull switch, patti holder, r.l.wire, starter push button n/m, toggle switch, t.t. horn assy 24 v, brake linner spring tata big, brake linner spring tata small, thurst washer front tata, front hub check nut tata 1613, front hub distance piece tata 1613, rear hub lock washer tata, rear hub check nut tata 1613, rear hub distance piece tata 1613, front hub shim tata, rear hub shim tata, front hub cotter pin tata, front derlin bush (brake cam bush 31 no.), fulcrum end spring, rear derlin bush ( brake cam bush 32 no.), roller for brake cam, brake linner spring small tata 1613, brake linner spring big tata 1613, brake cam lock tata 1613, brake cam shim tata 1613, cmc assy 29066421, csc assy 29066722, kit major 29967275, kit major 29967053, kit 29967221, kit29967320, cmc assy 29067016, csc assy 29066553, cmc kit 29967278, brake lining rivit alluminium (set of 80 pcs), brake linner front tata 1613 std (4 pcs with rivets), brake linner front tata 1613 1st (4 pcs with rivets), brake linner front tata 1613 2nd oversize (4 pcs with rivets), brake linner rear tata 1613 std (4 pcs with rivets), brake linner rear tata 1613 1stoversize (4 pcs with rivets), brake linner rear tata 1613 2nd oversize (4 pcs with rivets), brake linner front / rear tata 1618 bs-6 std (4 pcs with rivets), brake linner front/ rear tata 1618 bs-6 1st oversize (4 pcs with rivets), fan belt bs3 tata 1325, fan belt 8pk 1260, fan belt tata bs4 2525231463313 (aux13-1060), fan v belt tata bs4 2525 2314 6316 om600, air comp fan belt pulley bs4 without brg 6203, power steering filter plastic lock type, fuel filter fine big with ring tata 1613, b.l. bulb 24v dcsf, r.l. bulb 24v bs-6 (double point & d. filament ), fog lamp bulb 24v, head light bulb helogen 24v 43t 100/90, head light bulb helogen 24v 43t 75/70, head light bulb helogen 24v 45t 100/90, head light bulb helogen 24v 45t 75/70, head light bulb yellow 24v, meter bulb 24v, r.l. bulb 24v 2441, bulb fix type t-10, head light bulb h-1 bs-6, head light bulb h-11 bs-6, gear lever end assy l.h., gear lever end assy r.h., gear lever bracket

State Government

CTN :45634087 Due date: 10 Jul, 202610 Jul, 2026 NA
Tender For supply of electrical material at various institutes under nanaji deshmukh veterinary science university, jabalpur - copper wire - 1 mm , copper wire - 1.5 mm , copper wire - 2.5 mm , copper wire - 4. mm , copper wire - 6. mm , copper wire - 10 mm , aluminium wire - 2.5 mm , aluminium wire - 10 mm , aluminium wire - 6 mm , pvc pipe ¾” x 10’, pvc pipe fitting l bow and bend , pvc pipe fitting t bend, pvc pipe fitting bend, ceiling led 2’ x 2’, ceiling led 9” x 9”, ceiling led 6” x 6”, led flood light - 35 watt , led flood light - 60 watt , led flood light - 90 watt , led flood light - 200 watt , led street light – 90 watt , led street light – 60 watt , led bulb - 5 watt , led bulb - 9 watt , led bulb - 12 watt , led bulb - 18 watt , led bulb - 40 watt , lmv lamp - 90 watt , led batten light - 22 watt , main switch – 63 amp , main switch – 100 amp , main switch – 200 amp , mcb – 10 amp , mcb – 16 amp , mcb – 25 amp , mcb – 32 amp, mcb – 63 amp, mcb – 100 amp, mcb – 200 amp, spn – 63 amp, spn – 100 amp, spn – 200 amp, change over , kit kat - 16 amp. , kit kat - 32 amp. , kit kat - 63 amp. , kit kat - 100 amp. , starter (three phase) – 3 hp, , starter (three phase) – 5 hp, , starter (three phase) – 7.5 hp, , pvc casing – ¾” inch , pvc casing – 1” inch ( 1”), pvc casing – 1½” inch (ढेडइंच), pvc casing fittings - l bow - ¾” inch , pvc casing fittings - l bow – 1” inch , pvc casing fittings - l bow - 1½” inch , pvc casing fittings - t band - ¾” inch , pvc casing fittings - t band – 1” inch , pvc casing fittings - t band - 1½”inch , pvc casing nails , sheddle, sheddle1mm, sheddle2mm, sheddle 3 mm, sheddle4mm, sheddle5mm, sheddle6mm, sheddle 7 mm, sheddle8mm, sheddle9mm, sheddle10mm, sheddle 11 mm, sheddle 12 mm, sheddle13mm, sheddle14mm, sheddle 15 mm, sheddlepona inch , sheddle 1 inch, grip 6mm, pannel board , cable – alluminium – 1/2/3/3½ core , cable – alluminium - armored 1 phase – 10sqmm, cable – alluminium - armored 3 phase – 25 sqmm, cable – alluminium - armored 3 phase – 50 sqmm, cable – alluminium - armored 3 phase – 70 sqmm, cable – alluminium–p p d cable 10mm, armored cable – 1/2/3/3½ core , armored cable - 3 phase – 25 sqmm, armored cable - 3 phase – 50 sqmm, armored cable - 3 phase – 70 sqmm, joint kit ( 33/11 ), insulation tape – ( 25 nos. tape each box ), rubber tape (lt.), 11 kv xlpe cable 3 core 3phase ( 3x35-50 sqmm) , 11 kv xlpealuminium cable 3 core 3phase ( 3x70-90 sqmm) , lighting resistant 33 kv , gum boot ( size 7 nub.) , gum boot ( size 8 nub.) , gum boot ( size 9 nub.) , hand gloves – heavy duty ( l.t.) , ceiling fan – ( 1200 mm sweep ), ceiling fan – ( 1400 mm sweep ), wall fan - , exhaust fan - 9”, exhaust fan - 12”, exhaust fan - 18”, socket flush type - 6 amp , socket flush type - 16 amp , socket modular type – 16 amp , switch flush type - 6 amp , switch flush type - 16 amp , switch modular type – 6 amp , switch modular type – 16 amp , angel holder , batton holder, pendant holder, remote cell, remote cell bell, pvc combined box - 3 module , pvc combined box - 6 module , combine switch socket – 16 amp, ht cable air bunch -33kv 95 sqmm, fasteners - 3”, fasteners - 4”, fasteners - 6”, bus bar - 100 amp , cut out - 32 amp , cut out - 63 amp , jhulafor electric pole, dio fuse 33kv, regulator - electronic heavy duty modular, p.p. cable – 10 mm, hammer bid - 6 mm , flexible pipe (1/3” ), t.p.n. – 32 amp , t.p.n. – 63 amp , holder , 3 pin top ceramic , pinchis ( taparia ) , tester , screw driver ( four head ), pin insulator , disc insulator , shackle insulator , earth road , lightning arrester ( arrester) , ac box , aluminium wire -4 mm, cut out -300 amp, cut out -200 amp, pvc pipe 1 inch, regulator - electronic heavy duty non modular, regulator - switch type modular, condenser 2.5 mfd, condenser 3.15 mfd, condenser 4 mfd, condenser 8 mfd, condenser 10 mfd, extension board 6 amp., extension board 16 amp., open modular pvc box 3, open modular pvc box 4, open modular pvc box 6, open modular pvc box 8, open modular p

State Government

CTN :45636157 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For annual rate contract for procurement of auto garage equipments spares- hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915 , battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., cylinder liner-hardened- 10 o/s make :liners india (1set = 6 nos), piston with pin and circlip (al - 401) make : ipl

CTN :45318928 Due date: 01 Jul, 202601 Jul, 2026 11.91 Lacs
Tender For corrigendum : supply of gi pin for 22 kv pin insulator , metal parts for lt shackle insulator , gi pin for lt pin insulator

CTN :45637378 Due date: 24 Jun, 202624 Jun, 2026 NA
Tender For supply of spare parts diesel flexible pipe (filter to pump)- bolero , air cleaner filter- mm jeep , ac condensor fan relay with cable-bolero plus , self starter carbon holder with carbon-bolero plus , auto switch/starter switch-bolero , switch ac temperature controller-bolero plus , head light holder (ceramic) 10 , soldering iron , self starter carbon holder with carbon-bosch-bolero plus , tail lamp assy lh-yellow-bolero plus , tail lamp assy rh-yellow-bolero plus , auto switch/starter switch-scorpio vlx , clutch release bearing-tata spacio , outside rear view mirror-lh-scorpio classic , outside rear view mirror-rh-scorpio classic , engine mounting rear-tata spacio , clutch plate with pressure plate assy-tata sumo , emergency siren 12v , emergency siren bracket , red vinyle sticker- "govt. of w.b."-18" x 2" , single fuse box-6 mm , brake oil-dot3-250 ml (red) , clutch sleeve cylinder assy-sumo gold , brake shoe lining with rivets- tata gold , brake shoe lining with rivets- 1st oversize-tata gold

corporations/Associations/Others

CTN :45263412 Due date: 04 Jul, 202604 Jul, 2026 NA
Tender For corrigendum : supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure p
 Loading, Please wait...

Connect us via What's Up