Latest head band Tenders | Government head band Tenders

Central Government/Public Sector

CTN :40362504

09 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For corrigendum : work as per boq - demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition). , m&l for cutting chases, in brick wall, pinning in and making good to facing where required and pointing in cement mortar (1:3), to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing etc and making good the disturbed surface, cutting exceeding 20cm girth complete , m&l for complete removal of existing treatment and levelling of wall surface using mechanical/electrical operated sanding/scraping machine with inbuilt vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc and applying one coat of water proofing wall care putty of 3mm thick for obtaining smooth paintable surface complete , m&l for applying two coats of 100% premium acrylic emulsion paint(using air-less paint sprayer) having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using air-less paint primer sprayer including preparation/levelling of old surface of wall using manual sand papers , m&l for applying one coat of synthetic enamel paint after preparation of old steel sufaces of any description over 10 cm girth or width complete

corporations/Associations/Others

CTN :40630317

19 Jun, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For nctps i se mi circle r m 25 26 mpm dn unit iii cleaning and painting of one coat of red oxide and two coats of h r aluminum paint including cost of paint consumables and t ps over the mill coal pipe in unit iii

State Government

CTN :40639027

06 Jun, 2025 7.92 Lacs

Manuguru - Telangana

Tender For specialized treatment to the exterior walls in all elevations with two coats of acrylate copolymers based elastomeric waterproof coating of approved make and shade over one coat of primo wall primer for (g+4) project hostel building, btps, manuguru

CTN :40477952

11 Jun, 2025 2.58 Lacs

Dharmapuri - Tamil Nadu

Tender For corrigendum : supply of fabricaiton and instalaltion of 20 inch 150 class pipeline , fabrication of 20 inch 150 class elbow with flange joint , supply of iwl hyperself rw1 adhesive membrane , supply of cold stick primer , removal of existing wrapping and surface cleaning , painting of pipeline with coldstick primer 2 coats , instalaltion of iwl hyperslef rw1 adhesive

CTN :40629830

12 Jun, 2025 22.58 Lacs

Rupnagar - Punjab

Tender For supply of furniture at vikas bhawan, sector- 62, s.a.s nagar - dnit for providing furniture, double bed with 2 side tables (pillar design / carved back)supply of king size double bed, made up of 1st quality teak wood and 18mm ply isi marked with head board and foot board duly carved. bed back should have cushioned back with velvet jaquard fabric. all exposed surfaces should be duly polished with 2 coats of pu / melamine as per the colour and theme of room. should have 2 side tables of 18" width having 2 drawers with telescopic channels and antique handle. design of the side tables should be matching with bed design, bed room chair (ply back design)supply of wooden bedroom chair made of 1st quality of teak wood frame and legs with brass caps. should have bent wood ply with veneer back, duly polisde ith pu / melamine finish. having fabric upholstry with high density foam (sleepwell or equivilat) used for seat 3" and back sides as per design., bed room chair (full cushioned)supply of full covered bedroom chair made of 1st quality of teak wood frame and legs with brass caps. duly polisde ith pu / melamine finish. having fabric upholstry with high density foam (sleepwell or equivilat) used for seat 3" and sides and back side as per design., side table 24" (round with onyx marble top)supply of teak wood round table with wooden legs as per design approved, duly polished with pu / melamine finish having onyx marble on top duly polished with double moulding as per design approved.runner carpet (as per design approved), study chairsupply of wooden chair made of 1st quality of teak wood frame and legs with brass caps. should have bent wood ply with veneer back, duly polisde ith pu / melamine finish. having fabric upholstry with high density foam (sleepwell or equivilat) used for seat 3" and back sides as per design. entire upholstry should have double quilting as per design approved with softy foam in side with best finishing., sofa set 7 seater ( 3+2+2)the farme of the sofa should be of best quality hard wood with supports of best quality pine wood .the seats should be of sleepwell hr foam cushion of 4" thickness with foam & fibre covering. back cushion should also be of sleepwell hr foam of 1" / 2" thickness.the fabric should be of best quality material of d decor or equivalent as per approved colour, design & shade. all wood work to be polished with pu polish finish with matching colour and shade of office furniture with best quality material., sofa single chair(same as of sofa design)the farme of the sofa should be of best quality hard wood with supports of best quality pine wood .the seats should be of sleepwell hr foam cushion of 4" thickness with foam & fibre covering. back cushion should also be of sleepwell hr foam of 1" / 2" thickness.the fabric should be of best quality material of d decor or equivalent as per approved colour, design & shade. all wood work to be polished with pu polish finish with matching colour and shade of office furniture with best quality material., center table (48" x 30") with onyx marble topcenter table of best quality mp teak wood and hdhmr ply with 4mm thick natural wood veneer pasted on top. all wood work to be polished with pu polish finish with matching colour & shade of office furniture with best quality material. having drawers / strorage provision at botom., center table (36" x 36") with onyx marble topcenter table of best quality mp teak wood and hdhmr ply with 4mm thick natural wood veneer pasted on top. all wood work to be polished with pu polish finish with matching colour & shade of office furniture with best quality material., side table (21" x 21") with onyx marble topside table of best quality mp teak wood and hdhmr ply with 4mm thick natural wood veneer pasted on top. all wood work to be polished with pu polish finish with matching colour & shade of office furniture with best quality material., mid back wing chair (matching with sofa)the farme of the chair s

Central Government/Public Sector

CTN :40621768

03 Jul, 2025 NA

Katni - Madhya Pradesh

Tender For supply of 25 kv earthing/discharge rod assembly for high rise ohe with working voltage 25 kv ac trac tion with top clamp (suitable for 36 to 50 mm bus bar & also suitable for 10 to 20 mm dia. conductor) pole made of cast resin or resin-bonded glass fibre, coated with three coats of poly-urethane, the discharge/earthi ng pole assembly shall have an overall length of not less than 7.5 metres in five equal sections, single core fl exible multi-strand annealed copper cable should have double insulation, a cross-section of 50 sqmm, of size 314/0.45 mm & 14 meter long cable [specification is:1554 (pt.i)-1988 & is 2071(pt. 1 & iii) ]

Central Government/Public Sector

CTN :40604378

25 Jun, 2025 NA

Pune - Maharashtra

Tender For supply and fitment of wooden board of size 6 feet x 3 feet x 18 mm thickness on iron c ots including hardware at daund running room, grade of the ply moisture resistant (mr) anti- warpin g & anti-swelling with two coats of acrylic paint all over as per the scope of work attached [ warranty period: 30 months after the date of delivery ]

CTN :40580779

24 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply of removing of 2 ft x 2 ft false ceiling sheets distempering and refixing of the same are 44 sqft x 48 sqft , wall painting providing touch up putty and two coats of asian tractor distemper , aluminium and glass 03 track sliding window size 04 ft x 04 ft x 04 nos , aluminium glass door 07 ft x 04 ft , installation of door entry size 7 ft x 4 ft alongwith glass gate , repair and polishing of bar counter and wall skirting tiles , 25 sqmm 4 core ug cabe universal or polycalbe , 2 ton pillar ac voltas , deep freezer blue star 500 ltr , 2 ft x 2 ft ceiling lights led , led flood light 04 ft and 50 watts orbit , ceiling fan 1200 mm sweep cromption or bajaj or usha , outdoor panel box with mcb , electric wiring using copper wire 04 sqmm and 2.5 sqmm and 1.5 sqmm with pvc pipe and switch control for light points 24 nos fan point 14 nos and 15 amps 04 nos and 5 amps 04 nos , laying of ug cable , electrician labour charges

CTN :40568316

12 Jun, 2025 NA

Khurda - Odisha

Tender For supply of sight flow glass , painting of pipeline , structural steel painting , providing and applying 2 coats of white wash , structural steel works , wooden stopper , sply of pressure guages 0 to 25 kg range 4 inch glycrn ss , supply of 4 core 2.5 sq mm copper cable with laying , supply of metalic gasket 2 inch and 3 inch , supply of copper jumper

CTN :40188524

04 Jun, 2025 2.89 Lacs

Agra - Uttar Pradesh

Tender For bid to ras custom bid for services-emergency repair/ replacement of header in kb line pump house under age e/m (west) of ge (west) agra-1 taking down supplying, fixing, testing and commission of ms header made out of heavy duty erw pipe of size 300 mm dia with end plates of 6 mtrs length with inlet connection 200 mm dia03 , and outlet connection 150 mm dia -03 nos on pcc pillars complete all as specified and directed. note:- all accessories like all fittings ( standard ms fittings with welded joint shall be used on the pipes) including tees, elbows, d-joint, reducer, union , flanges, rubber gaskets, gi nuts bolts, washer, including supporting/ fixing the pipe on floor/wall/ ceiling with clamps, hangers, angles with clamps, hangers, angles as per specification complete with two or more coats of synthetic enamel paint of approved make/ shade over one coat primer complete. 01 job 2 taking down and s&f ms pipe erw steel including specials, nominal 300 mm dia as per is 3589 (1981) thickness 5.4 mm. 3 taking down & s&f ms pipe erw steel including specials, nominal 200 mm dia as per is 3589 (1981) thickness 5.4 mm. 4 taking down & s&f ms pipe erw steel including specials, nominal 150 mm dia as per is 3589 (1981) thickness 5.4 mm. 5 taking down & supply, laying and jointing for the 100 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed 6 taking down & supply, laying and jointing for the 80 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed. 7 s&f in replacement 200 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 8 s&f in replacement 150 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 9 s&f in replacement 100 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 10 s&f in replacement 80 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 11 m&l for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 complete all as specified and directed. 12 excavation with the help of jcb and labour charges.

Head Band Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector